Delta DPS60M

DELTA DPS60M 60 Amp AC/DC Switching Power Supply Instruction Manual

Model: DPS60M | Brand: Delta

Einführung

The DELTA DPS60M is a high-efficiency, compact, lightweight, and high-performance switching power supply designed for use with 12-volt DC electronics. It is compatible with both 110V AC and 220V AC power sources, making it suitable for various applications including Ham/CB radios, linear amplifiers, and car stereo equipment. This manual provides essential information for the safe and effective operation of your DPS60M power supply.

Sicherheitshinweise

Please read and understand all safety instructions before operating the DELTA DPS60M power supply. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Hinteren view of the Delta DPS60M power supply showing a yellow warning label about hot surfaces.

Bild: Rückseite view of the Delta DPS60M power supply, highlighting the warning label regarding hot surfaces and the cooling fan.

Installationsanweisungen

  1. Auspacken: Carefully remove the power supply from its packaging and inspect for any damage.
  2. Bandtage Auswahl: Lokalisieren Sie das Volumentage selector switch on the rear panel. Ensure it is set to the correct AC input voltage für Ihre Region (110 V oder 220 V).
  3. Wechselstromanschluss: Connect the provided 3-prong AC power cord to the power supply's AC inlet and then to a grounded wall outlet.
  4. Gleichstromausgangsanschluss:
    • Identify the red (+) and black (-) binding post connectors on the rear panel.
    • Connect your 12V DC device's positive lead to the red (+) terminal and the negative lead to the black (-) terminal. Ensure connections are secure to prevent arcing or short circuits.
Hinteren view of the Delta DPS60M power supply showing the AC input, voltage selector, cooling fan, and DC output binding posts.

Image: Rear panel of the DPS60M, illustrating the AC input, voltage selector, and DC output terminals for connection.

Demonstration of Connections

Video: Demonstrates connecting a 12V DC device (air pump) to a power supply's binding posts and plugging the AC cord into a wall outlet. Note: This video features a similar power supply, but the connection principles apply.

Bedienungsanleitung

  1. Ein-/Ausschalten: Use the front-mounted power switch to turn the unit ON or OFF. A green LED indicator will illuminate when the unit is powered on.
  2. Bandtage-Einstellung: The DPS60M features a voltage adjustment knob that allows output voltage from 9VDC to 15VDC. A preset switch can quickly return the output to 13.8VDC.
  3. Volt/Amp Meter: The front panel includes an LED backlit VU meter that can display either voltage (VOLTS) or ampAlter (AMP). Use the meter switch to select the desired reading.
  4. Noise Offset Control: The Noise Offset Volume control helps minimize pulse noise from the switching circuit, improving audio clarity for communication equipment. Adjust as needed.
  5. Zigarettenanzünderanschluss: A front-facing cigarette lighter port provides convenient power for charging phones or accessories (Max 10A).
Nahaufnahme von vorn view of the Delta DPS60M power supply showing the Volt/Amp Meter, Lautstärketage adjust knob, noise offset knob, power switch, and cigarette lighter port.

Bild: Detailliert view of the front panel controls, including the meter, adjustment knobs, and power switch.

Betriebsdemonstrationen

Power Supply Features Overview

Video: Ein General überview of features found in power supplies, including adjustable smart charging, fixed output mode, battery type compatibility, LED indicators, and multiple protection mechanisms. While featuring a different model (PowerMax PM3), many concepts are applicable to the Delta DPS60M.

Power Supply Unboxing and Setup

Video: An unboxing and initial setup demonstration of a similar power supply (BTECH RPS-30PRO), showing connections and basic functionality. Useful for understanding physical setup.

Netzteil Voltage und Strommessung

Video: Demonstrates measuring voltage and current output from a similar power supply (BTECH RPS-30M), showing how to verify output parameters.

Powering Radio and Phone

Video: Shows a similar power supply (SKY TOPPOWER STP1330) powering a radio and charging a mobile phone via the 12V car cigarette lighter socket.

Wartung

Fehlerbehebung

ProblemMögliche UrsacheLösung
Gerät lässt sich nicht einschalten.No AC input power, faulty power cord, blown fuse.Check AC power connection. Test power cord. Replace fuse (F8A 250V) if blown.
Ausgangsvolumentage ist fehlerhaft oder instabil.Bandtage adjustment knob setting, internal fault.Stellen Sie die Lautstärke eintage knob or use the 13.8V preset. If problem persists, contact support.
Die Stromversorgung schaltet sich unerwartet ab.Überlastung, Überlautstärketage, or thermal protection activated.Reduce load on the power supply. Check for short circuits. Ensure adequate ventilation. Allow unit to cool down.
Excessive noise on communication equipment.Switching circuit noise.Adjust the Noise Offset Volume control to minimize interference.

Technische Daten

BesonderheitDetail
Eingangslautstärketage110V AC, 60Hz / 220V AC, 50Hz (selectable)
Ausgangsvolumentage13.8V DC (fixed) or adjustable from 9VDC-15VDC
Ausgangsstrom60 AMP Surge, 48 AMP Konstante
Ausgang Wattage60 Watts (general), 662.4 Watts (max)
KühlmethodeAir (Built-in Cooling Fan)
Anzahl der Fans1
SteckertypScrew-On Terminal Binding Post Connectors, Front Cigarette Lighter Port (Max 10A)
SchutzfunktionenElectronic Overload Protection w/Auto Reset, Short Circuit Thermal Protection Indicator, Over-Voltage Protection, Fuse Protected
Abmessungen (L x B x H)13'' x 7.5'' x 3''
FormfaktorCompact Rectangular
ModellnameDPS60M
HerstellerDelta Elektronik

Garantie und Support

Specific warranty information for the DELTA DPS60M is not provided in the product details. Please refer to the product packaging or contact Delta Electronics directly for warranty details and technical support.

Weitere Unterstützung finden Sie auf der Website des Herstellers. webWebsite oder wenden Sie sich an die Kundendienstabteilung.

Zugehörige Dokumente - DPS60M

Vorview Delta CliQ II DRP-24V240W2BN 24V 240W 2-Phasen DIN-Schienen-Netzteil – Datenblatt
Technisches Datenblatt für das Delta CliQ II DRP-24V240W2BN DIN-Schienennetzteil mit 24-V-Ausgang, 240 W Leistung, 2-Phasen-Eingang, hohem Wirkungsgrad und breitem Betriebstemperaturbereich. Enthält Spezifikationen, mechanische Daten, Umgebungsbedingungen, Sicherheitsstandards, EMV-Konformität und Betriebshinweise.
Vorview Technisches Datenblatt für Delta Chrome II DRC-60W Serie DIN-Schienen-Netzteil
Technisches Datenblatt für das Delta Chrome II DRC-60W DIN-Schienen-Netzteil, einschließlich Spezifikationen, Merkmale, mechanische Daten, Umgebungsbedingungen, Schutzfunktionen, Zuverlässigkeit, Sicherheitsstandards, EMV und technische Daten für die Modelle DRC-12V060W1RZ, DRC-24V060W1RZ und DRC-48V060W1RZ.
Vorview Technisches Datenblatt für Delta LYTE II DRL-120W DIN-Schienen-Netzteil
Technical datasheet for the Delta LYTE II DRL-120W series DIN rail power supply. This document details product features, specifications, safety compliance, EMC performance, mechanical dimensions, environmental operating conditions, and protection mechanisms for industrial applications.
Vorview Technisches Datenblatt für Delta Chrome II DRC-30W Serie DIN-Schienen-Netzteil
Detailed technical specifications, features, and application information for the Delta Chrome II DRC-30W Series DIN Rail Power Supply, including models DRC-05V030W1RZ, DRC-12V030W1RZ, and DRC-24V030W1RZ. Covers electrical, mechanical, environmental, and safety compliance for building automation and industrial applications.
Vorview Delta PMT2 200W Serie Einbau-Netzteil Datenblatt
Technisches Datenblatt für das Delta PMT2 200W-Einbaunetzteil. Enthält detaillierte Spezifikationen, Merkmale, Sicherheitsbestimmungen, mechanische Daten und elektrische Eigenschaften für industrielle Anwendungen.
Vorview Delta CliQ II DRP-24V100W1NN DIN-Schienen-Netzteil – Technisches Datenblatt
Technisches Datenblatt für das Delta CliQ II DRP-24V100W1NN 24V 91.2W 1-Phasen NEC Klasse 2 DIN-Schienen-Netzteil mit detaillierten Spezifikationen, Merkmalen, Sicherheitsstandards und Betriebsarten für industrielle Anwendungen.