WeMo F7C059 Dimmer Wi-Fi Lichtschalter – Benutzerhandbuch

1. Einleitung

The WeMo F7C059 Dimmer Wi-Fi Light Switch allows you to control and dim your lights from anywhere using the WeMo app, voice commands, or directly from the wall switch. This device integrates with your existing Wi-Fi network, eliminating the need for a separate hub. It is compatible with Amazon Alexa, Google Assistant, and Apple HomeKit, offering flexible control options for your smart home lighting.

Bild: Vorderseite view of the WeMo F7C059 Dimmer Wi-Fi Light Switch, showing its sleek white design with a vertical dimming strip and a circular power button.

2. Wichtige Sicherheitshinweise

Bitte lesen und verstehen Sie alle Sicherheitshinweise vor der Installation und Inbetriebnahme. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder Sachschäden führen.

• Stromschlaggefahr: Vor der Installation oder Wartung des Schalters muss immer die Stromzufuhr am Sicherungsautomaten unterbrochen werden.
• Neutralleiter erforderlich: This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire (typically white), this dimmer is not compatible.
• Single-Pole Installation Only: This dimmer is designed for single-pole light switches only. It is not compatible with 3-way (multi-location control) switches.
• Avoid Metal Faceplates: Not recommended for use with metal faceplates, as this may interfere with Wi-Fi signal.
• Nur zur Verwendung im Innenbereich: Dieses Gerät ist für den Gebrauch in Innenräumen an trockenen Orten bestimmt.
• Maximale Wattage: Halten Sie die angegebene maximale Wattzahl eintage: 400W Incandescent (single-gang), 250W Incandescent (multi-gang), 150W CFL/LED (single or multi-gang).

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• WeMo Wi-Fi Smart Dimmer (F7C059)
• Kurzanleitung (nicht in diesem digitalen Handbuch enthalten)
• Wire Nuts (typically included for installation)

Image: The WeMo Wi-Fi Smart Dimmer shown alongside its retail packaging, highlighting the product and its box.

4. Installation (Einrichtung)

This section guides you through the physical installation of your WeMo Dimmer. If you are unsure about any steps, consult a qualified electrician.

4.1 Prüfungen vor der Installation

1. Kompatibilität überprüfen: Ensure your existing switch is a single-pole switch (controls lights from one location) and that a neutral wire is present in the electrical box.
2. Erforderliche Werkzeuge: You will need a screwdriver, wire strippers, and electrical tape.

4.2 Verdrahtungsanweisungen

1. Strom ausschalten: Locate your circuit breaker panel and turn off the power to the light switch you are replacing. Verify the power is off by attempting to turn on the light.
2. Alten Schalter entfernen: Entfernen Sie vorsichtig die vorhandene Wandabdeckung und schrauben Sie den alten Schalter aus der Anschlussdose. Trennen Sie die Kabel und merken Sie sich deren Anschlüsse.
3. Drähte identifizieren:
   • Außenleiter (stromführender Draht): Typischerweise schwarz, führt Strom vom Leistungsschalter.
   • Lastkabel: Typically black, sends power to the light fixture.
   • Neutralleiter: Typically white, required for the WeMo Dimmer.
   • Erdungskabel: Typischerweise grünes oder blankes Kupfer.
4. Connect WeMo Dimmer:
   • Connect the WeMo Dimmer's schwarzes Kabel to the electrical box's Line (Hot) wire.
   • Connect the WeMo Dimmer's rotes Kabel to the electrical box's Lastdraht.
   • Connect the WeMo Dimmer's weißer Draht to the electrical box's Neutralleiter.
   • Connect the WeMo Dimmer's grünes Kabel to the electrical box's Erdungskabel.
   Use wire nuts to secure all connections. Ensure all connections are tight and insulated with electrical tape if necessary.
5. Montieren Sie den Dimmer: Carefully push the wired dimmer into the electrical box. Screw the dimmer into place.
6. Wandplatte installieren: Attach your existing or a new standard rocker-style wall plate.
7. Strom wiederherstellen: Gehen Sie zurück zu Ihrem Sicherungskasten und schalten Sie den Strom wieder ein.

Bild: Eine Nahaufnahme view of the WeMo Dimmer with its wires (black, red, white, green) extending, ready for electrical connection. This illustrates the wiring process.

Image: Diagram illustrating that the WeMo Dimmer is compatible with single-pole switches (one switch controlling one light) and not with 3-way switches (multiple switches controlling one light).

5. WeMo App Setup

After physical installation, set up your WeMo Dimmer using the WeMo app to enable smart features.

1. Download the WeMo App: Download the free WeMo app from the Apple App Store (for iOS) or Google Play Store (for Android).
2. Launch App and Add Device: Open the WeMo app and follow the on-screen instructions to add a new device.
3. Connect to WeMo Wi-Fi: Your phone will temporarily connect to the WeMo Dimmer's Wi-Fi network during setup.
4. Verbindung zum Heim-WLAN herstellen: Select your home 2.4GHz Wi-Fi network and enter the password when prompted.
5. Name Your Dimmer: Give your dimmer a descriptive name (e.g., "Living Room Lights").
6. Calibrate Dimmer: The app will guide you through a calibration process to optimize dimming for your specific bulbs (incandescent, CFL, or LED) and prevent flickering.

Image: A smartphone displaying the WeMo app interface, showing controls for dimming, scheduling, and night mode settings for a connected light switch.

6. Bedienung

Control your lights using the physical switch, the WeMo app, or voice commands.

6.1 Manuelle Steuerung

• Ein/Aus: Press the main circular button to turn the lights on or off.
• Dimmen: Slide your finger along the vertical touch-sensitive strip to adjust brightness levels.

6.2 App-Steuerung

The WeMo app provides advanced control features:

• Fernbedienung: Turn lights on/off and adjust brightness from anywhere with an internet connection.
• Zeitpläne und Timer: Set custom schedules for lights to turn on/off or dim at specific times, or sync with sunrise/sunset.
• Nachtmodus: Configure a low-light setting for specific hours to protect your eyes from bright lights during the night.

Image: A couple relaxing on a couch, watching television, with the text "Set the mood from anywhere" suggesting remote control of lighting.

7. Integration der Sprachsteuerung

Integrate your WeMo Dimmer with popular voice assistants for hands-free control.

• Amazon Alexa: Enable the WeMo skill in the Alexa app and discover devices. You can then say commands like, "Alexa, dim the living room lights to 50%."
• Google Assistant: Link your WeMo account in the Google Home app. Use commands such as, "Hey Google, turn off the bedroom light."
• Apple HomeKit: While advertised as compatible, some users may experience issues with HomeKit setup. Ensure your WeMo Dimmer firmware is up to date. If a HomeKit code is not present on the device or packaging, direct integration may not be immediately available.

Image: A visual representation of voice control, showing a speech bubble with "Dim the lights to 20%." and logos for Apple HomeKit, Amazon Alexa, and Google Assistant.

8. Wartung

To ensure optimal performance and longevity of your WeMo Dimmer:

• Reinigung: Wipe the dimmer and wall plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Firmware-Updates: Regularly check the WeMo app for available firmware updates. These updates can improve performance, add features, and enhance security.
• Power-Cycling: If the dimmer becomes unresponsive, try turning off the power at the circuit breaker for 10 seconds, then turning it back on.

9. Fehlerbehebung

If you encounter issues with your WeMo Dimmer, refer to the following common problems and solutions:

10. Spezifikationen

11. Garantie und Support

For warranty information, technical support, or further assistance, please visit the official WeMo support website or contact their customer service. Details are typically available on the product packaging or the WeMo webWebsite.

Online-Hilfe: www.wemo.com/support (Examp(der tatsächliche Link kann abweichen)