Pro-Ject Essential III Sgt. Pepper

Pro-Ject Essential III Beatles Plattenspieler – Benutzerhandbuch

Model: Essential III Sgt. Pepper

Einführung

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.

Packungsinhalt

Bitte überprüfen Sie vor Beginn, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

Pro-Ject Essential III Beatles Turntable with dust cover removed, showing the blue plinth with Beatles Sgt. Pepper's artwork and the clear acrylic platter.

Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.

Aufstellen

Follow these steps to set up your turntable for optimal performance:

  1. Auspacken: Entnehmen Sie alle Komponenten vorsichtig aus der Verpackung. Bewahren Sie die Verpackung für spätere Transporte oder Lagerung auf.
  2. Platzierung: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
  3. Plattentellerinstallation: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
  4. Riemeninstallation: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
  5. Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
  6. Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
  7. Antiskating-Einstellung: Attach the anti-skating weight to the designated groove on the tonearm support.
  8. Staubschutzhülle: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
  9. Verbindungen: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preamplifier oder amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Close-up of the Pro-Ject Essential III turntable's motor pulley and drive belt mechanism.

Image: Detail of the motor pulley and belt drive system.

Close-up of the Pro-Ject Essential III turntable's tonearm with the Ortofon OM10 cartridge mounted.

Image: The tonearm and pre-mounted Ortofon OM10 cartridge.

Bedienungsanleitung

To play a record:

  1. Einschalten: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
  2. Geschwindigkeit auswählen: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
  3. Ortsrekord: Carefully place your vinyl record onto the platter.
  4. Tonarm anheben: Verwenden Sie den Tonarmlifthebel, um den Tonarm anzuheben.
  5. Positionieren Sie den Abtaststift: Bewegen Sie den Tonarm vorsichtig über die gewünschte Startrille der Schallplatte.
  6. Unterer Tonarm: Senken Sie den Tonarm langsam mithilfe des Tonarmlifts ab. Die Nadel senkt sich auf die Schallplatte ab, und die Wiedergabe beginnt.
  7. Ende der Wiedergabe: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Seite view of the Pro-Ject Essential III turntable showing the power switch and the 'The Beatles' logo on the plinth.

Image: Power switch location on the turntable plinth.

Wartung

Regular maintenance ensures the longevity and optimal performance of your turntable:

Fehlerbehebung

Sollten Sie Probleme mit Ihrem Plattenspieler haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:

ProblemMögliche UrsacheLösung
No power / Turntable not spinningStromkabel nicht angeschlossen; Steckdose defekt; Netzschalter ausgeschaltet.Check power connections; Try a different outlet; Ensure power switch is 'On'.
Kein Ton oder sehr leiser TonFalsche Eingabe ausgewählt am amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampschwerer.Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one.
Distorted sound / SkippingStylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged.Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record.
Brummendes GeräuschErdungskabel nicht angeschlossen; Störungen durch andere elektronische Geräte.Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics.
Speed inconsistencyDrive belt worn or improperly seated; Motor issue.Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support.

Technische Daten

BesonderheitDetail
ModellnameEssential III Sgt. Pepper
MarkeProjekt
Abmessungen (L x B x H)12.99 x 16.54 x 4.41 Zoll
Artikelgewicht11 Pfund (ca. 5 kg)
KonnektivitätstechnologieCinch
MaterialHolzwerkstoff, Kunststoff
AntriebssystemRiemenantrieb mit Synchronmotor und Silikonriemen
TellerAcrylic (Acryl it E upgrade)
Tonarm8.6" Aluminium Tonearm
PatronePre-mounted Ortofon OM10
Stromverbrauch im Ein-Modus4.5 Watt

Garantie und Support

For warranty information and technical support, please refer to the official Pro-Ject Audio Systems webWebsite oder wenden Sie sich an Ihren autorisierten Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Hersteller: Pro-Ject-Audiosysteme

Als Erstes verfügbar: 31. Mai 2017

Rückgaberecht: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).

Weitere Unterstützung finden Sie unter Pro-Ject Store on Amazon.

Zugehörige Dokumente - Essential III Sgt. Pepper

Vorview Pro-Ject A1 Plattenspieler: Benutzerhandbuch, Einrichtung und Spezifikationen
Ausführliche Anleitung für Einrichtung, Bedienung und Wartung Ihres Pro-Ject A1 Plattenspielers. Enthält technische Daten, Tipps zur Fehlerbehebung und Garantieinformationen.
Vorview Pro-Ject A1 Plattenspieler – Benutzerhandbuch
Gebrauchs- und Einrichtungshinweise für den Pro-Ject A1 Plattenspieler, einschließlich technischer Spezifikationen, Wartung und Fehlerbehebung.
Vorview Pro-Ject A1.2 Plattenspieler: Gebrauchsanweisung und Einrichtungshandbuch
Umfassende Anweisungen zum Einrichten, Bedienen und Warten des Plattenspielers Pro-Ject A1.2, einschließlich technischer Daten und Tipps zur Fehlerbehebung.
Vorview Pro-Ject A1.2 Plattenspieler: Gebrauchsanweisung und technische Daten
Ausführliche Anleitung zur Verwendung, Einrichtung, Wartung und technischen Spezifikationen des Plattenspielers Pro-Ject A1.2. Enthält Sicherheitshinweise und eine Anleitung zur Fehlerbehebung.
Vorview Pro-Ject RPM 3 Carbon Plattenspieler: Benutzerhandbuch und Einrichtungsanleitung
Ausführliche Anleitung für Einrichtung, Betrieb und Wartung des Pro-Ject RPM 3 Carbon HiFi-Plattenspielers. Beinhaltet die Installation und Justierung des Tonabnehmers, technische Daten und Fehlerbehebung. Auch die Sumiko Oyster-Serie wird behandelt.
Vorview Pro-Ject T1 EVO Plattenspieler – Einrichtungsanleitung und Produktinformationen
Ausführliche Einrichtungsanleitung und Produktinformationen für den Pro-Ject T1 EVO, einen audiophilen Einsteiger-Plattenspieler, mit detaillierten Informationen zu Einrichtungsschritten, Anschlussmöglichkeiten, Funktionen, technischen Spezifikationen und Garantiebestimmungen.