PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet User Manual

Einführung

This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet. Please read this guide thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

Image: PROFLO brand logo, a blue oval with 'PROFLO' written in white.

Sicherheitshinweise

Always observe basic safety precautions when installing or servicing plumbing fixtures. Failure to follow these instructions could result in property damage or personal injury.

• Schalten Sie vor der Installation die Hauptwasserversorgung ab.
• Tragen Sie während der Installation Schutzbrille und Handschuhe.
• Stellen Sie sicher, dass alle örtlichen Bau- und Sanitärvorschriften eingehalten werden.
• Do not overtighten connections, as this may cause damage.
• Wenn Sie sich bei irgendeinem Teil der Installation unsicher sind, konsultieren Sie einen qualifizierten Installateur.

Packungsinhalt

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact PROFLO customer service.

• Wasserhahn-Auslaufbaugruppe
• Warmwassergriff-Baugruppe
• Kaltwassergriff-Baugruppe
• Pop-Up-Ablaufvorrichtung
• Befestigungsmaterial (Unterlegscheiben, Muttern)
• Water Supply Lines (typically included or purchased separately)

Image: A chrome widespread bathroom faucet with a high-arc spout and two separate lever handles, along with a pop-up drain rod visible behind the spout.

Technische Daten

Installation

This section outlines the general steps for installing your widespread bathroom faucet. Specific details may vary based on your sink and plumbing setup.

1. Spülbecken vorbereiten: Ensure the sink deck has three pre-drilled holes for a widespread faucet. Clean the area around the holes.
2. Griffe installieren: Insert the hot and cold water handle assemblies into the outer holes of the sink deck. Secure them from underneath with washers and mounting nuts. Ensure the handles are oriented correctly.
3. Wasserhahnauslauf installieren: Insert the faucet spout assembly into the center hole of the sink deck. Secure it from underneath with the provided washer and mounting nut.
4. Wasserleitungen anschließen: Connect the hot and cold water supply lines to the corresponding handle assemblies and then to your home's hot and cold water supply valves. Connect the flexible lines from the handles to the faucet spout. Hand-tighten connections, then use a wrench for a final quarter-turn. Do not overtighten.
5. Pop-Up-Ablauf installieren: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body into the sink drain hole with a gasket, securing it from underneath, and connecting the lift rod mechanism to the faucet spout.
6. Auf Dichtheit prüfen: Once all connections are secure, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
7. Spülen Sie den Wasserhahn: Remove the aerator from the spout. Turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator.

Betrieb

Your PROFLO PFWSC6860 faucet features two lever handles for precise control of water temperature and flow, and a pop-up drain for basin Kontrolle.

• Wasserdurchfluss: Lift the hot water handle (typically on the left) to increase hot water flow. Lift the cold water handle (typically on the right) to increase cold water flow.
• Temperaturkontrolle: Stellen Sie die Warm- und Kaltwassergriffe gleichzeitig ein, um die gewünschte Wassertemperatur zu erreichen.
• Pop-Up-Ablauf: Push down on the lift rod located behind the faucet spout to close the drain and fill the basin. Pull up on the lift rod to open the drain and allow water to empty.

Wartung und Reinigung

Proper care will help maintain the finish and performance of your faucet.

• Regelmäßige Reinigung: Reinigen Sie den Wasserhahn regelmäßig mit einem weichen Tuch und milder Seife. Spülen Sie ihn gründlich mit klarem Wasser ab und trocknen Sie ihn mit einem weichen Tuch, um Wasserflecken zu vermeiden.
• Vermeiden Sie scharfe Reinigungsmittel: Verwenden Sie keine Scheuermittel, aggressive Chemikalien oder Scheuerschwämme, da diese die Chromoberfläche beschädigen können.
• Wartung des Belüfters: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse it before reattaching.
• Abflussreinigung: Periodically remove and clean the pop-up drain stopper to prevent buildup and ensure proper drainage.

Fehlerbehebung

In diesem Abschnitt finden Sie häufig auftretende Probleme und deren Lösungen.

Garantie und Support

PROFLO products are manufactured to high-quality standards. For warranty information or technical assistance, please contact PROFLO customer service directly. Keep your purchase receipt as proof of purchase.

Weitere Unterstützung finden Sie auf der offiziellen PROFLO-Website. webBesuchen Sie die Website oder kontaktieren Sie deren Kundendienst.