Godox X1R-S 2.4G TTL Wireless Flash Receiver for Sony Cameras

1. Einleitung

The Godox X1R-S is a 2.4G wireless flash receiver designed for Sony DSLR cameras, offering TTL (Through-The-Lens) autoflash compatibility and high-speed sync capabilities. This receiver integrates seamlessly into the Godox wireless X system, allowing for remote control of compatible flashes and studio strobes. This manual provides detailed instructions for setting up, operating, and maintaining your X1R-S receiver.

2. Produktüberschreitungview

Hauptmerkmale:

• Kompatibilität: Designed for Sony DSLR cameras, supporting TTL Autoflash.
• Drahtloses System: Built-in 2.4G wireless transmission for reliable communication up to 100 meters.
• Flash-Modi: Supports TTL Autoflash, Manual Flash, and Multi-Flash modes.
• Sync Functions: 1/8000s High-Speed Sync (HSS), Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Modeling Flash.
• Kontrolle: Wireless remote control and grouping system with 5 groups (A/B/C/D/E) in GR mode and 3 groups (A/B/C) in Ratio mode, across 32 channels.
• Auslöser: Functions as a wireless shutter release via its 2.5mm sync port.
• Anzeige: Wide LCD panel with backlight for easy operation.
• Leistung: Uses 2x AA batteries.
• Firmware: Micro-USB-Anschluss für Firmware-Upgrades.

Komponentenidentifikation:

Abbildung 1: Vorderseite view of the Godox X1R-S receiver, showing the hot shoe mount and 'TEST' button.

Abbildung 2: Oben view of the Godox X1R-S receiver, highlighting the LCD screen and channel/group buttons.

Abbildung 3: Seite view of the Godox X1R-S receiver, showing the Micro USB port and 2.5mm sync port.

3. Einrichtung

3.1 Einlegen der Batterie

1. Slide open the battery compartment cover located on the side of the receiver.
2. Legen Sie zwei (2) AA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
3. Schließen Sie den Batteriefachdeckel fest.

Figure 4: The battery compartment of the X1R-S receiver, showing two AA batteries being inserted.

3.2 Montage des Empfängers

1. Attach the X1R-S receiver to the hot shoe of your Sony camera.
2. Secure the receiver by tightening the locking wheel.
3. Mount your compatible flash unit onto the hot shoe of the X1R-S receiver.

Abbildung 5: Unten view of the X1R-S receiver, showing the hot shoe mount for camera attachment.

3.3 Connecting to Studio Strobes/Other Devices

For studio strobes or other devices requiring a sync connection, use the provided 2.5mm sync cable. Connect one end to the 2.5mm sync port on the X1R-S receiver and the other end to the sync port of your studio strobe or device.

Figure 6: The X1R-S receiver shown with various sync cables for connecting to different flash units.

3.4 Kanal- und Gruppeneinstellungen

Ensure the channel and group settings on your X1R-S receiver match those on your Godox X-series transmitter (sold separately). This ensures proper communication between the units.

• Use the 'CH' button to select the desired channel (1-32).
• Use the 'GR' button to select the desired group (A/B/C/D/E).

4. Bedienungsanleitung

4.1 Ein-/Ausschalten

Slide the ON/OFF switch located on the side of the receiver to power it on or off.

4.2 Testblitz

Press the 'TEST' button on the receiver to manually trigger the connected flash unit. The 'STATUS' indicator will light up to confirm the flash has fired.

4.3 Wireless Flash Control

Once the receiver is properly set up and paired with a compatible Godox X-series transmitter, the flash connected to the X1R-S will fire in sync with your camera's shutter release, according to the settings configured on the transmitter. This includes TTL, Manual, Multi-flash, HSS, FEC, and FEL functions.

4.4 Drahtloser Auslöser

The X1R-S receiver can also function as a wireless shutter release for your camera. Connect the receiver to your camera's shutter release port using an appropriate 2.5mm sync cable. The shutter release function is typically controlled via the transmitter.

4.5 LCD-Bildschirm

The wide LCD panel displays current settings such as channel, group, flash mode, and battery status. The backlight can be toggled on/off for visibility in various lighting conditions.

5. Wartung

5.1 Batteriewechsel

Replace the AA batteries when the battery indicator on the LCD panel shows low power to ensure uninterrupted operation.

5.2 Firmware-Aktualisierung

The X1R-S receiver features a Micro USB port for firmware upgrades. Visit the official Godox website for the latest firmware and instructions to ensure optimal performance and compatibility.

6. Fehlerbehebung

• Blitz zündet nicht:
  • Check if the receiver is powered on and has fresh batteries.
  • Ensure the channel and group settings on the receiver match the transmitter.
  • Verify that the flash unit is properly mounted and powered on.
  • Check the connection of the 2.5mm sync cable if using a studio strobe.
  • Test the flash manually using the 'TEST' button on the receiver.
• Unregelmäßiges Abfeuern:
  • Ensure the receiver and transmitter are within the effective operating range (up to 100m).
  • Check for potential interference from other 2.4G wireless devices. Try changing channels.
  • Verify battery levels in both the receiver and the connected flash unit.
• TTL/HSS not working:
  • Confirm that both your camera and flash unit support TTL/HSS.
  • Ensure the receiver is securely mounted on the camera's hot shoe and the flash is securely mounted on the receiver.
  • Check the settings on your transmitter to ensure TTL/HSS is enabled.

7. Spezifikationen

8. Offizielle Produktvideos

Godox CT-16 Flash Trigger Kit Operation

Godox CT-16 Wireless Flash Trigger

Godox X3 Trigger Operation Tutorial

9. Garantie und Support

Informationen zu Garantie, technischem Support oder Serviceanfragen finden Sie auf der offiziellen Godox-Website. webBesuchen Sie unsere Website oder wenden Sie sich an Ihren autorisierten Händler. Die genauen Garantiebedingungen können je nach Region und Händler variieren.