Bionik Tetra Power Charging Dock for Nintendo Switch Joy-Con Controllers User Manual

1. Einleitung

The Bionik Tetra Power is a compact charging dock designed for Nintendo Switch Joy-Con controllers. It allows for simultaneous charging of up to four Joy-Con controllers, providing a convenient and organized charging solution. This manual provides essential information for the proper setup, operation, and maintenance of your Tetra Power charging dock.

Image 1.1: Bionik Tetra Power Charging Dock in its retail packaging. The packaging highlights its ability to charge four Joy-Con controllers and its compatibility with Nintendo Switch.

Hauptmerkmale:

• Kompaktes Design: Unique cross formation allows simultaneous charging of up to four Joy-Con controllers without occupying excessive space.
• Integriertes Kabelmanagement: Features a built-in system for adjusting and storing the charging cable, promoting a tidy setup.
• LED Charge Status Indicators: Provides clear visual feedback on the charging status of each connected Joy-Con controller.
• Ästhetische Integration: Designed to complement the visual style of the Nintendo Switch console.

2. Einrichtungsanweisungen

1. Packen Sie das Gerät aus: Carefully remove the Bionik Tetra Power charging dock from its packaging.
2. An die Stromversorgung anschließen: The charging dock features a built-in USB cable. Connect this USB cable to an available USB port on your Nintendo Switch dock or to a compatible USB power adapter (not included).
   

   Image 2.1: The Bionik Tetra Power charging dock viewed from the side, showing its integrated USB cable for power connection.
3. Kabelmanagement: Utilize the built-in cable management system located at the base of the dock to adjust the cable length and store any excess, ensuring a neat setup.
   

   Image 2.2: The underside of the Tetra Power dock, illustrating the integrated cable management system for organizing the USB cable.

4. Platzierung: Place the charging dock on a stable, flat surface near your Nintendo Switch console for convenient access.

3. Bedienungsanleitung

Charging Joy-Con Controllers:

1. Ensure the Tetra Power charging dock is connected to a power source.
2. Align a Joy-Con controller with one of the four charging slots on the dock. Gently slide the Joy-Con downwards until it clicks into place and makes contact with the charging pins.
   

   Image 3.1: The Tetra Power charging dock with two Nintendo Switch Joy-Con controllers inserted into their respective charging slots.

3. Repeat for additional Joy-Con controllers, up to a maximum of four.

LED Charge Status Indicators:

Each charging slot is equipped with an LED indicator to display the charging status of the connected Joy-Con controller:

• Rote LED: Zeigt an, dass der Joy-Con-Controller gerade geladen wird.
• Grüne LED: Indicates that the Joy-Con controller is fully charged.
• Keine LED: Indicates no Joy-Con is connected or the dock is not receiving power.

Bild 3.2: Eine Nahaufnahme view of the LED charge status indicators on the Tetra Power dock, showing the illuminated status lights.

4. Wartung

• Reinigung: Disconnect the charging dock from its power source before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Avoid using abrasive cleaners, solvents, or harsh chemicals.
• Lagerung: Bei längerer Nichtbenutzung sollte die Ladestation an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen, aufbewahrt werden.
• Handhabung: Behandeln Sie das Gerät mit Sorgfalt. Vermeiden Sie es, es fallen zu lassen oder starken Stößen auszusetzen, da dies die internen Bauteile beschädigen könnte.

5. Fehlerbehebung

• Joy-Con not charging:
  • Ensure the charging dock is properly connected to a powered USB port.
  • Verify that the Joy-Con controller is correctly seated in the charging slot and making full contact with the charging pins.
  • Check if the USB cable is securely connected to both the dock and the power source.
  • Try connecting the dock to a different USB port or power adapter.
• LED-Anzeige leuchtet nicht:
  • Confirm the charging dock is receiving power.
  • Ensure a Joy-Con controller is properly inserted into the slot.
  • If the Joy-Con is fully charged, the LED will be green. If no Joy-Con is present, the LED will be off.

6. Spezifikationen

7. Garantie und Support

Bionik products are manufactured with quality and reliability in mind. For specific warranty information, product support, or to register your product, please visit the official Bionik webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.

Hersteller: Bionik

WebWebsite: bionikgaming.com

Image 7.1: The back of the Tetra Power retail box, displaying multilingual features, specifications, and manufacturer contact details including the webWebsite.