1. Einleitung
The LanParte Wireless LANC Remote Control (Model LRC-02) provides comprehensive wireless control for Panasonic GH4, GH5, and other cameras utilizing the LANC protocol. This device allows users to remotely manage video recording, photo capture, and zoom functions, enhancing operational flexibility during shoots.
2. Packungsinhalt
Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:
- Drahtloser Fernsender
- Drahtloser Empfänger
- 2.5mm to 2.5mm LANC Connection Cable
- Hot Shoe Adapter Screw
- Mini Screwdriver (for battery compartment)
Image: All components of the LanParte Wireless LANC Remote Control system, including the transmitter, receiver, cable, hot shoe adapter, and screwdriver.
3. Produktüberschreitungview
3.1. Sender
The transmitter features several buttons for controlling camera functions:
- Foto-Button: Press to capture a still image.
- W/T Buttons: Control zoom functions (Wide and Telephoto) when using compatible power zoom lenses.
- Cam Power Button: Intended to power the camera on/off. Note: Functionality may vary by camera model.
- START/STOP-Taste: Initiates and terminates video recording.
3.2. Empfänger
The receiver connects to your camera and communicates wirelessly with the transmitter:
- 2.5mm LANC Port: Connects to the camera's LANC input using the provided cable.
- Kontrollleuchte: Provides status feedback (e.g., power, connection status).
- Befestigungsgewinde: Allows attachment to a hot shoe or other mounting points using the adapter screw.
Image: The LanParte wireless remote transmitter and receiver, connected by the 2.5mm LANC cable.
4. Einrichtung
4.1. Einlegen der Senderbatterie
- Suchen Sie das Batteriefach auf der Rückseite des Senders.
- Use the provided mini screwdriver to open the battery compartment cover.
- Insert a CR2032 coin cell battery, ensuring correct polarity (+/-).
- Schließen Sie den Batteriefachdeckel sicher.
4.2. Receiver Connection and Mounting
- Connect one end of the 2.5mm LANC connection cable to the receiver's 2.5mm port.
- Connect the other end of the cable to the LANC input port on your Panasonic GH4, GH5, or compatible camera.
- Attach the hot shoe adapter screw to the receiver's mounting thread.
- Slide the receiver onto your camera's hot shoe and tighten the adapter screw to secure it.
Image: A user holding the LanParte remote transmitter, with the receiver connected to a Panasonic GH5 camera via cable.
5. Bedienungsanleitung
Ensure both the camera and the remote control system are powered on before operation.
- Kamera ein-/ausschalten: Drücken Sie die Nockenleistung button on the transmitter. Note that this function's compatibility can vary by camera model.
- Videoaufnahme starten/stoppen: Drücken Sie die START/STOP button to begin recording. Press it again to stop recording.
- Foto aufnehmen: Drücken Sie die Foto button to take a still photograph.
- Zoomsteuerung: If using a power zoom lens, press the W button to zoom out (Wide) and the T button to zoom in (Telephoto).
6. Wartung
- Keep the remote control and receiver clean and dry. Use a soft, dry cloth for cleaning.
- Setzen Sie das Gerät keinen extremen Temperaturen, Feuchtigkeit oder direkter Sonneneinstrahlung aus.
- When not in use for extended periods, consider removing the battery from the transmitter to prevent leakage.
- Store the device in a protective case to prevent physical damage.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Fernbedienung antwortet nicht. | Low or dead transmitter battery. Receiver not powered or connected. Out of range. | Replace transmitter battery. Ensure receiver is properly connected to camera's LANC port. Move closer to the receiver. |
| Cam Power button does not work. | Camera model does not support remote power control via LANC. | This is a camera-specific limitation. Manually power on/off the camera. |
| Die Zoomfunktion funktioniert nicht. | Non-power zoom lens attached. Power zoom function disabled in camera settings. | Ensure a compatible power zoom lens is used. Check camera settings to enable power zoom control. |
| Recording/Photo not activating. | Incorrect camera mode. Loose cable connection. | Set camera to appropriate video or photo mode. Verify the LANC cable is securely connected to both receiver and camera. |
8. Spezifikationen
- Modellnummer: LRC-02
- Marke: LanParte
- Artikelgewicht: 8.3 Unzen
- Konnektivitätstechnologie: Wireless (Infrared, based on product description)
- Kompatible Geräte: Cameras (specifically Panasonic GH4, GH5, and LANC protocol cameras)
- Maximale Anzahl unterstützter Geräte: 1 (one receiver per camera)
- Besonderheit: Ergonomisches Design
9. Garantie und Support
LanParte products are typically covered by a limited manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the documentation provided with your purchase or visit the official LanParte webWebsite.
For technical support, troubleshooting assistance, or service inquiries, please contact LanParte customer support directly through their official channels. Provide your product model number (LRC-02) and purchase information when seeking support.
