Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor

1. Einleitung

Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

2. Sicherheitshinweise

• Elektrische Sicherheit: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Verwendung im Außenbereich: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
• Lampentyp: Use only R7s halogen bulbs with a maximum wattage of 150W. Exceeding the maximum wattage can cause overheating and damage to the fixture or create a fire hazard.
• Handhabung: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
• Montage: Stellen Sie sicher, dass die Montagefläche strukturell stabil ist und das Gewicht der Vorrichtung tragen kann.

3. Packungsinhalt

Bitte prüfen Sie, ob alle Komponenten vorhanden und unbeschädigt sind:

• Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
• Montagezubehör (Schrauben, Dübel)
• Bedienungsanleitung (dieses Dokument)

Note: R7s bulb is typically not included and must be purchased separately.

4. Einrichtung und Installation

Bevor Sie beginnen: Stellen Sie sicher, dass die Stromversorgung zum Installationsbereich am Hauptschalter unterbrochen ist.

1. Montagefläche vorbereiten: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
2. Montieren Sie die Halterung: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
3. Verdrahtung: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
4. Installieren Sie die Glühbirne: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
5. Befestigungselement anbringen: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
6. Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.

Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.

Abbildung 4.2: Nahaufnahme view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.

5. Bedienungsanleitung

Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:

• Bewegungserkennung: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
• Leuchtdauer: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
• Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.

6. Wartung

• Reinigung: Um die Leuchte zu reinigen, stellen Sie sicher, dass der Strom abgeschaltet ist. Wischen Sie sie mit einem weichen, feuchten Tuch ab.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche oder den Sensor beschädigen können.
• Lampenwechsel: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
• Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen, lose Verbindungen oder Verschleiß. Sollten Sie Mängel feststellen, schalten Sie die Stromzufuhr ab und wenden Sie sich an einen qualifizierten Elektriker.

7. Fehlerbehebung

8. Spezifikationen

Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.

9. Garantie und Support

Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.