1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Emtek Privacy Set with Square Rosette and Helios Lever. Please read all instructions carefully before beginning installation to ensure proper function and to avoid damage to the product or door.
1.1 Sicherheitshinweise
- Tragen Sie während der Installation stets geeignete Schutzausrüstung, wie z. B. eine Schutzbrille.
- Um Verletzungen zu vermeiden, muss während der Montage sichergestellt werden, dass die Tür sicher abgestützt ist.
- Kleinteile von Kindern fernhalten.
- Wenn Sie sich bei einem der Schritte unsicher sind, konsultieren Sie einen qualifizierten Fachmann.
2. Packungsinhalt
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Emtek customer support.
- Helios Lever (Interior and Exterior)
- Square Rosettes (Interior and Exterior)
- Privacy Latch Mechanism
- Schlagplatte
- Befestigungsschrauben
- Spindel
- Emergency Release Pin
- Installationshardware
Image 1: Emtek Privacy Set, Square Rosette, Helios Lever in Flat Black finish. This image displays the complete lever assembly, including the square rosette and the lever handle, which is designed for right-hand doors.
3. Benötigtes Werkzeug
Für die Installation werden üblicherweise folgende Werkzeuge benötigt:
- Kreuzschlitzschraubendreher
- Bandmaß
- Bleistift
- Drill (if new door preparation is required)
- Wood Chisel (if new door preparation is required)
4. Türvorbereitung
Ensure your door is properly prepared for the Emtek Privacy Set. This lever is designed for doors between 1-3/8 inches to 2-1/4 inches thick with a standard 2-1/8 inch bore hole.
4.1 Backset Measurement
The standard latch is for a 2-3/8 inch backset (distance from the edge of the door to the center of the bore hole). If your door requires a 2-3/4 inch backset, ensure you have the correct latch mechanism.
- Measure the distance from the edge of the door to the center of the existing bore hole.
- If installing on a new door, mark the center of the bore hole at the desired backset (2-3/8" or 2-3/4") and drill a 2-1/8" hole.
5. Installationsanweisungen
Befolgen Sie diese Schritte für eine erfolgreiche Installation:
- Riegel installieren: Insert the privacy latch mechanism into the bore hole on the edge of the door. Ensure the bevel of the latch bolt faces the direction the door closes. Secure with screws.
- Schließblech montieren: Position the strike plate on the door frame, aligning it with the latch bolt. Mark and chisel out the necessary recess for a flush fit. Secure with screws.
- Install Exterior Rosette and Lever: Place the exterior rosette and lever assembly onto the door, ensuring the spindle passes through the latch mechanism. The lever is handed (Right Hand), so ensure it is oriented correctly.
- Install Interior Rosette and Lever: Place the interior rosette and lever assembly onto the door, aligning it with the exterior components. Ensure the spindle engages properly.
- Sichere Baugruppen: Use the provided mounting screws to secure the interior and exterior assemblies together. Tighten screws evenly until snug, but do not overtighten.
- Testbetrieb: Test the lever action and the privacy locking mechanism to ensure smooth operation.
6. Bedienungsanleitung
The Emtek Privacy Set is designed for interior doors where a locking function is desired from the inside, such as bedrooms or bathrooms. It does not feature an exterior key lock.
6.1 Tür verriegeln
From the interior side of the door, locate the privacy button or turn-piece on the rosette. Engage this mechanism to lock the door. The exterior lever will then be disengaged, preventing entry.
6.2 Tür aufschließen
From the interior, disengage the privacy button or turn-piece to unlock the door. From the exterior, an emergency release pin (typically a small hole) is provided on the rosette. Insert the emergency release pin into this hole and push to unlock the door in case of an emergency or accidental lockout.
7. Pflege und Wartung
Proper care will help maintain the finish and functionality of your Emtek door hardware.
- Reinigung: Reinigen Sie die Hardware mit einem weichen, fusselfreien Tuch.amp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the Flat Black finish.
- Schmierung: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal mechanisms to ensure smooth operation. Do not use oil-based lubricants, which can attract dust.
- Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
8. Fehlerbehebung
If you encounter issues with your Emtek Privacy Set, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Hebel ist locker oder wackelig. | Befestigungsschrauben sind lose. | Tighten the mounting screws evenly. Do not overtighten. |
| Der Verschluss lässt sich nicht reibungslos zurückziehen. | Latch mechanism is dry or misaligned. | Apply silicone lubricant to the latch bolt. Check for proper alignment of the latch in the bore hole. |
| Door does not latch or close properly. | Strike plate is misaligned or not recessed enough. | Adjust the strike plate position or deepen the recess as needed. |
| Privacy lock does not engage/disengage. | Internal mechanism issue or spindle misalignment. | Ensure the spindle is correctly engaged with both lever assemblies. If the issue persists, contact customer support. |
9. Spezifikationen
- Marke: Emtek
- Modellnummern: 5110HLO, 5210HLO
- Produktart: Privacy Door Lever Set
- Design: Square Rosette, Helios Lever
- Handausrichtung: Rechte Hand
- Beenden: Mattschwarz
- Material: Messing
- Kompatibilität der Türstärke: 1-3/8" to 2-1/4"
- Standard Door Prep: 2-1/8" bore hole
- Dornmaß: Standard 2-3/8" (2-3/4" available)
- Produktabmessungen: Ungefähr 9 Zoll lang x 7 Zoll breit
- Projektionsabstand: 2.38 Zoll
- Artikelgewicht: 2.88 Pfund
- Enthaltene Komponenten: Installationshardware
10. Garantie und Support
Emtek products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Emtek website. If you require technical assistance or have questions regarding your product, please contact Emtek customer support directly.
For more information, visit the official Emtek webWebsite: www.emtek.com
