BLACK+DECKER BXUP1100XDE Submersible Dirty Water Pump

1. Einleitung

The BLACK+DECKER BXUP1100XDE is a reliable and powerful submersible pump with a stainless steel body, specifically designed for pumping dirty water from various sources such as wells, ponds, tanks, pits, and other containers. This pump is capable of handling dirt and debris up to 35mm in diameter.

It features an integrated float switch for automatic operation, allowing the pump to activate and deactivate based on water levels. The maximum immersion depth for the BXUP1100XDE is 7 meters, and it can pump water up to a height of 10.5 meters.

2. Sicherheitshinweise

WARNUNG: Lesen Sie vor der Inbetriebnahme dieses Produkts alle Sicherheitshinweise und Anweisungen. Die Nichtbeachtung der Hinweise und Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.

• Always disconnect the pump from the power supply before performing any maintenance, cleaning, or when the pump is not in use.
• Stellen Sie sicher, dass die Stromversorgungslautstärketage matches the rating plate on the pump.
• Do not operate the pump with a damaged power cord or plug. If damaged, it must be replaced by the manufacturer or a qualified service agent.
• Heben oder tragen Sie die Pumpe niemals am Netzkabel. Benutzen Sie den integrierten Griff.
• Do not run the pump dry. Ensure it is fully submerged in water during operation to prevent overheating and damage.
• Halten Sie Kinder und Unbefugte vom Arbeitsbereich fern.
• This pump is designed for dirty water. Do not use it for flammable, corrosive, or explosive liquids.
• Ensure the installation site is stable and the pump cannot tip over.

3. Produktüberschreitungview

The BXUP1100XDE pump features a robust design for efficient and reliable performance.

• Hochleistungsmotor: Equipped with IPX8 protection against high temperatures, ensuring reliability and a long service life.
• Langlebig Casing: Compact design with a corrosion-resistant stainless steel casing.
• Integrated Float Switch: For automatic start and stop based on water level.
• Universalstecker: Compatible with discharge hoses of 25mm (1"), 32mm (1 1/4"), or 38mm (1 1/2").

Image 1: The BLACK+DECKER BXUP1100XDE submersible pump with its float switch, operating in a pond to remove water.

4. Einrichtung

1. Schlauchanschluss: Attach a suitable discharge hose (not included) to the universal connector. The pump supports hose diameters of 25mm (1"), 32mm (1 1/4"), or 38mm (1 1/2"). Secure the hose connection to prevent leaks.
2. Platzierung: Carefully lower the pump into the water, ensuring it rests on a stable, flat surface at the bottom of the container, well, or pond. The pump must be fully submerged before operation.
3. Float Switch Positioning: Position the float switch so it can move freely and is not obstructed by the pump body or the container walls. The float switch determines the automatic start and stop levels of the pump.
4. Elektrischer Anschluss: Connect the pump's power plug to a grounded electrical outlet. Ensure the outlet is protected by a residual current device (RCD) for safety.

Image 2: A user carefully lowering the BLACK+DECKER BXUP1100XDE submersible pump into a water feature, demonstrating proper placement.

5. Bedienungsanleitung

1. Erstinbetriebnahme: Once the pump is correctly installed and submerged, and the power is connected, the pump will start automatically when the water level rises sufficiently to activate the float switch.
2. Automatische Operation: The integrated float switch will automatically turn the pump on when the water level reaches a certain height and turn it off when the water level drops to approximately 45mm.
3. Überwachung: Periodically check the pump's operation and the discharge hose to ensure there are no blockages and water is flowing freely.
4. Manueller Stopp: To stop the pump manually, disconnect it from the power supply.

6. Wartung

• Reinigung: Spülen Sie die Pumpe nach jedem Gebrauch, insbesondere beim Pumpen von verschmutztem Wasser, gründlich mit sauberem Wasser ab, um Ablagerungen oder Sedimente zu entfernen.
• Laufradprüfung: Regularly check the impeller area for any blockages from large debris. Disconnect power before inspecting and carefully remove any obstructions.
• Schwimmerschalterprüfung: Ensure the float switch moves freely and is not encrusted with dirt, which could impair its function.
• Kabelinspektion: Periodically inspect the power cable for any signs of damage, cuts, or fraying. Do not use the pump if the cable is damaged.
• Lagerung: When not in use for extended periods, clean the pump, allow it to dry completely, and store it in a dry, frost-free location.

7. Fehlerbehebung

8. Spezifikationen

Image 3: Dimensional diagram of the BLACK+DECKER BXUP1100XDE submersible pump, showing its height, width, and depth.

9. Garantie und Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the manufacturer, Annovi Reverberi S.p.A, directly. Keep your proof of purchase for any warranty claims.