Einführung
This manual provides essential information for the safe and effective operation, maintenance, and care of your Makita DTD 153 ZJ 18V Battery-Powered Brushless Impact Wrench. Please read and understand all instructions before use to ensure optimal performance and user safety. The tool is designed for driving screws into wood, metal, and plastic materials.
Hauptmerkmale
- Bürstenlosen Motor: Bietet mehr Leistung, Effizienz und eine längere Werkzeuglebensdauer.
- Kompaktes Design: Short design of only 138 mm for improved maneuverability in tight spaces.
- Ergonomischer Griff: Perfectly shaped for comfortable grip and reduced user fatigue.
- Integrierte LED-Beleuchtung: Illuminates the work area for enhanced visibility in dimly lit conditions.
- Robuste Konstruktion: Features protective caps on the housing and rubber seals for dust and splash water resistance, ensuring durability.
- Unterschiedliche Geschwindigkeit: Allows for precise control over fastening applications.
Figure 1: The Makita DTD 153 ZJ 18V Brushless Impact Wrench, shown with a compatible 18V battery (not included with solo unit).
Aufstellen
- Einlegen der Batterie: Ensure the battery is fully charged. Align the battery with the tool's battery port and slide it in until it clicks securely into place. To remove, press the release button on the battery and slide it out.
- Bit-Installation: Pull the bit holder collar forward. Insert the desired 1/4" hex shank bit into the holder. Release the collar to lock the bit in place. Gently pull on the bit to ensure it is securely fastened.
- Gurtbefestigung: If desired, attach the wrist strap to the designated loop on the tool's base for added security during operation.
Video 1: A demonstration of handling and basic setup for a cordless impact wrench, including battery insertion and bit attachment.
Bedienungsanleitung
- Ein-/Ausschalten: The tool is activated by pressing the trigger switch. The speed increases with increased pressure on the trigger.
- Drehrichtung: Use the forward/reverse switch located above the trigger to select the desired rotation direction for tightening or loosening screws.
- LED-Arbeitslicht: The integrated LED light automatically illuminates when the trigger is pressed, providing visibility to the work area.
- Befestigungsschrauben: Position the bit on the screw head. Apply firm, steady pressure and press the trigger. The impact mechanism will engage as resistance increases, driving the screw efficiently.
Abbildung 2: Eine Nahaufnahme view of the integrated LED work light on the Makita DTD 153 ZJ, which illuminates the fastening area.
Wartung
- Reinigung: Reinigen Sie die Außenseite des Werkzeugs regelmäßig mit einem weichen, fusselfreien Tuch.amp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
- Belüftungsöffnungen: Um eine Überhitzung zu vermeiden, sollten die Lüftungsöffnungen frei von Staub und Schmutz gehalten werden.
- Batteriepflege: Batterien sollten kühl und trocken gelagert werden. Sie dürfen keinen extremen Temperaturen oder Feuchtigkeit ausgesetzt werden. Vor der Lagerung und regelmäßig während längerer Lagerzeiten müssen die Batterien vollständig aufgeladen werden.
- Inspektion: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. Contact authorized service personnel for repairs.
Fehlerbehebung
- Werkzeug startet nicht: Ensure the battery is fully charged and properly inserted. Check the forward/reverse switch is not in the neutral (locked) position.
- Reduzierte Leistung: A low battery charge can cause reduced power. Recharge the battery. Ensure the correct bit is used for the application.
- Überhitzung: If the tool overheats, stop use immediately and allow it to cool down. Check ventilation openings for blockages. Avoid continuous heavy-duty use without breaks.
- Bit hält nicht: Ensure the bit is correctly inserted into the 1/4" hex chuck and the collar is fully released to lock it.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | DTD 153 ZJ |
| Marke | Makita |
| Stromquelle | Batteriebetrieben (18 V) |
| Maximales Drehmoment | 165 Nm (Hard) / 170 Nm |
| Werkzeughalter | 1/4" Sechskant |
| Leerlaufdrehzahl | 0-2900 min-1 |
| Idle Impact Rate | 0-3500 min-1 |
| Tightening Capacities (Machine Screws) | 4-8 mm |
| Tightening Capacities (Standard Screws) | 5-16 mm |
| Tightening Capacities (HV Screws) | 5-12 mm |
| Abmessungen (L x B x H) | 137 x 79 x 238 mm |
| Gewicht (ohne Batterie) | 0.97 kg |
| Schalldruckpegel | 93 dB(A) |
| Schallleistungspegel | 104 dB(A) |
| Vibration Emission (Impact Screws) | 10.5 m/s² |
| Material | Plastik |
Garantie und Support
Makita power tools are engineered for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Makita website. For technical support, service, or to locate an authorized service center, please contact Makita customer service or consult the contact information provided in your product packaging.
Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
