AVANTEK Wireless Doorbell CW-12 User Manual

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of your AVANTEK Wireless Doorbell CW-12. Please read this manual thoroughly before using the product to ensure proper function and longevity. This wireless doorbell system offers convenience and reliability for your home or office.

2. Packungsinhalt

Bitte überprüfen Sie beim Auspacken, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

• 1 × Transmitter (Doorbell Push Button)
• 2 × Plug-in Receivers (Chime Units)
• 1 × Adhesive Tape for Transmitter Mounting
• 2 × Screws for Transmitter Mounting
• 2 × Anchors for Transmitter Mounting
• 1 × Schraubendreher
• 1 × Benutzerhandbuch

3. Produktmerkmale

• 1000 ft (300 m) Ultra-Long Wireless Range: Ensures you never miss a visitor, even if you are a few rooms away or on another floor.
• 52 Chimes and Melodies: Choose from a wide selection of sounds with a 1.1 inch (29 mm) stereo speaker for rich, crisp audio.
• 5 einstellbare Lautstärkestufen: Customize the sound level up to a maximum of 115 dB.
• LED-Blitzanzeige: Provides a visual alert, useful for noisy environments or for individuals with hearing impairments.
• IP55 Dustproof and Waterproof Transmitter: Designed to withstand various harsh weather conditions, operating effectively from -4 °F to 140 °F (-20 °C to 60 °C).
• Speicherfunktion: Remembers your last melody and volume level after a power outage, wodurch das Zurücksetzen der Einstellungen entfällt.
• Compact Receiver Design: The mini plug-in receivers are designed not to block adjacent power sockets.
• Erweiterbares System: Easily add more AVANTEK CR-1/RB-1 plug-in receivers for increased coverage.

4. Einrichtung und Installation

4.1. Empfänger einrichten

1. Plug the receiver into a standard electrical outlet. The LED on the receiver will flash, indicating it is powered on.

4.2. Transmitter Setup and Installation

The transmitter (push button) can be installed using either the adhesive tape or screws and anchors.

Method A: Using Adhesive Tape

1. Clean the desired installation area thoroughly to ensure it is free of dust and moisture.
2. Remove the protective film from one side of the adhesive tape and attach it to the back of the transmitter.
3. Entfernen Sie die Schutzfolie von der anderen Seite des Klebebands.
4. Firmly press the transmitter onto the cleaned surface for at least 30 seconds.

Methode B: Verwendung von Schrauben und Dübeln

1. Open the transmitter cover by inserting the provided key into the grooved slot and gently prying it open.
2. Mark the positions for drilling holes on the wall using the back plate of the transmitter as a template.
3. Bohren Sie an den markierten Stellen zwei Löcher. Setzen Sie die Dübel in die Löcher ein.
4. Secure the back plate of the transmitter to the wall using the provided screws.
5. Snap the transmitter cover back onto the secured back plate.

5. Bedienungsanleitung

5.1. Melodien wechseln

To select a melody, press the 'Next' or 'Previous' button on the side of the receiver. There are 52 melodies available. Once you find your desired melody, it will be saved automatically.

5.2. Lautstärke anpassen

Press the 'Volume' button on the side of the receiver to cycle through 5 adjustable volume levels. Select the volume level that best suits your needs.

5.3. Lautlos-Modus

To activate silent mode, repeatedly press the 'Volume' button until the volume indicator shows the lowest setting or is muted. In silent mode, the LED indicator will still flash when the doorbell is pressed, providing a visual alert without sound.

5.4. Sender und Empfänger koppeln

Your doorbell system comes pre-paired. If you need to re-pair or add additional transmitters/receivers:

1. Stecken Sie den Empfänger in eine Steckdose.
2. Press and hold the 'Volume' button on the receiver for 3 seconds until the LED flashes rapidly. This indicates pairing mode.
3. Immediately press the push button on the transmitter. The receiver will chime once, and its LED will flash simultaneously with the transmitter's LED, indicating successful pairing.
4. Repeat the process for any additional transmitters or receivers.

6. Wartung

6.1. Batteriewechsel (Sender)

The transmitter uses a CR2032 lithium battery, which typically lasts up to 3 years. To replace the battery:

1. Insert the provided key or a small flat-head screwdriver into the grooved slot on the side of the transmitter.
2. Gently pry open the rear cover of the transmitter.
3. Die alte CR2032-Batterie vorsichtig entnehmen.
4. Setzen Sie eine neue CR2032-Batterie ein und achten Sie darauf, dass die positive Seite (+) nach oben zeigt.
5. Snap the rear cover back into place until it clicks securely.

7. Fehlerbehebung

• Kein Ton vom Empfänger: Ensure the receiver is properly plugged into a working power outlet. Check the volume level and ensure it is not set to silent mode. Re-pair the transmitter and receiver if necessary.
• Sender funktioniert nicht: Verify the battery in the transmitter is correctly installed and has sufficient charge. Replace the CR2032 battery if needed. Ensure the transmitter is within the 1000 ft wireless range of the receiver.
• Interferenz: Avoid installing the transmitter close to or on metal surfaces (e.g., metal door frames, metal mailboxes) as this can interfere with the wireless signal. Large metal objects or thick walls can reduce the effective range.
• Kurze Reichweite: Obstacles such as thick walls, metal structures, or other wireless devices can reduce the operating range. Try relocating the receiver or transmitter to a different position.

8. Spezifikationen

9. Garantie und Support

AVANTEK is committed to providing high-quality products and customer satisfaction. Our wireless doorbell is approved by FCC, CE, and RoHS standards. We offer dedicated customer service and will always do our best to support you with any inquiries or issues.

For further assistance or warranty claims, please refer to the contact information provided on the AVANTEK official webWebsite oder Ihre Kaufdokumentation.