Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver and accompanying 6.5" 2-Way Marine Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.
Sicherheitshinweise
- Always disconnect the vehicle's battery negative terminal before installation to prevent electrical shorts.
- Stellen Sie sicher, dass alle Kabel ordnungsgemäß isoliert und befestigt sind, um Beschädigungen durch Vibrationen oder Abrieb zu vermeiden.
- Do not operate the unit in a manner that distracts you from safe navigation.
- Consult a qualified marine electronics technician if you are unsure about any installation steps.
- This product is designed for marine environments; however, avoid direct high-pressure water spray on the unit.
Packungsinhalt
Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:
- JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver
- Two (2) pairs of 6.5" 225 Watt Peak Power High-Performance 2-Way Marine Speakers
- Mounting hardware for receiver (typically U-bracket, nuts, washers)
- Benutzerhandbuch (dieses Dokument)
Notiz: Speaker mounting hardware and speaker wire are typically not included and must be purchased separately.
Setup und Installation
Receiver Installation (JBL PRV-175)
The PRV-175 receiver is designed for marine gauge-style mounting, fitting into a standard tachometer opening.
- Wählen Sie einen Montageort: Select a flat, secure surface on your boat's dashboard or console that can accommodate the receiver's dimensions and provides adequate clearance for wiring.
- Schneiden Sie das Montageloch aus: Using a suitable hole saw, cut a circular opening of approximately 3 inches (76mm) in diameter. Refer to the included template for precise measurements.
- Verdrahtung: Connect the power, ground, speaker outputs, and auxiliary inputs/outputs according to the wiring diagram provided with the unit. Ensure all connections are secure and waterproof.
- Montieren Sie den Empfänger: Insert the receiver into the opening. Secure it from the rear using the supplied U-bracket, nuts, and washers. Tighten until snug, but do not overtighten.
Bild: Front view of the JBL PRV-175 Marine Stereo Receiver, showing the display and control buttons. This unit is designed for gauge-style mounting.
Speaker Installation (6.5" Marine Speakers)
The 6.5" marine speakers are designed for flush mounting in suitable locations on your boat.
- Montageorte auswählen: Choose locations that provide optimal sound dispersion and are structurally sound. Ensure there is sufficient depth behind the mounting surface for the speaker magnet.
- Cut Speaker Openings: Carefully cut circular openings for the speakers, typically around 5.6 inches (142mm) in diameter. Refer to the speaker's template for exact dimensions.
- Lautsprecherkabel anschließen: Run speaker wires from the receiver to each speaker location. Connect the positive (+) and negative (-) terminals of the speaker to the corresponding wires from the receiver. Ensure correct polarity for optimal sound.
- Montieren Sie die Lautsprecher: Place the speakers into the openings and secure them using appropriate marine-grade screws (not included) through the mounting holes on the speaker frame.
Bild: Front view of a JBL 6.5-inch Marine Speaker with a chrome grille. These speakers are designed for flush mounting in marine environments.
Bedienungsanleitung
Ein-/Ausschalten
- Halten Sie die MODE/SEL button to power the unit on or off.
Lautstärkeregelung
- Drücken Lautstärke+ um die Lautstärke zu erhöhen.
- Drücken vol- Lautstärke verringern.
Quellenauswahl
- Drücken Sie die MODE/SEL button repeatedly to cycle through available sources: AM, FM, Bluetooth (BT MUSIC), USB, and Auxiliary (AUX).
AM/FM-Radiobetrieb
- In AM/FM mode, press the SCANNEN/APS Taste zum automatischen Scannen und Speichern starker Sender.
- Verwenden Sie die Vorheriger Titel (◀◀) Und Nächster Titel (▶▶) buttons to manually tune or seek through stations.
Bluetooth-Audiostreaming
- Paarung: Select BT MUSIC mode. On your Bluetooth-enabled device, search for available devices and select "JBL PRV-175". Enter "0000" if a passcode is required.
- Wiedergabe: Nach der Kopplung können Sie Audio von Ihrem Gerät streamen. Verwenden Sie die Abspielen/Pause (▶▶) button on the receiver to control playback. Use the Vorheriger Titel (◀◀) Und Nächster Titel (▶▶) Tasten zum Überspringen von Titeln.
USB-Wiedergabe
- Insert a USB drive (containing compatible audio files) into the USB port. The unit will automatically switch to USB mode and begin playback.
- Verwenden Sie die Abspielen/Pause (▶▶), Vorheriger Titel (◀◀), Und Nächster Titel (▶▶) Tasten zur Steuerung der Wiedergabe.
Zusatzeingang
- Connect an external audio device to the auxiliary input using a 3.5mm audio cable.
- Select AUX mode on the receiver. Audio playback is controlled from the connected device.
Wartung
- Reinigung: Verwenden Sie ein weiches,amp cloth to clean the receiver's faceplate and speaker grilles. Avoid harsh chemicals or abrasive cleaners.
- Verbindungen: Überprüfen Sie regelmäßig alle Kabelverbindungen auf Korrosion oder Lockerung, insbesondere in maritimen Umgebungen.
- Lagerung: If the boat is stored for an extended period, ensure the unit is powered off and consider disconnecting the battery.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät wird nicht mit Strom versorgt | Blown fuse; improper wiring; battery disconnected | Check and replace fuse; verify power and ground connections; ensure battery is connected. |
| Kein Ton von den Lautsprechern | Incorrect source selected; speaker wires disconnected; volume too low; ampLifier-Problem | Select correct source; check speaker wire connections; increase volume; consult technician if amplifier is suspected. |
| Bluetooth stellt keine Verbindung her | Unit not in BT MUSIC mode; device not in pairing mode; interference | Ensure receiver is in BT MUSIC mode; put device in pairing mode; move device closer to receiver; try re-pairing. |
| USB spielt nicht | Unvereinbar file format; USB drive not recognized; unit not in USB mode | Sicherstellen files are compatible (e.g., MP3); try a different USB drive; select USB mode. |
Technische Daten
JBL PRV-175 Marine Receiver
- Typ: Marine Gauge Style Digital Media Receiver
- Tuner: AM/FM
- Konnektivität: Bluetooth Audio Streaming, USB input (for USB drives only), Auxiliary input (3.5mm Jack)
- AmpReiniger: Built-In, 45 Watts Peak x 4 channels (20 Watts RMS x 4 channels)
- Frontplatte: Wasserdicht
- Ausgaben: 2 Paar RCA-Ausgang
- Kontrolle: Option für kabelgebundene Fernbedienung
- Modellnummer: PRV-175
6.5" Marine Speakers
- Typ: 2-way 6-1/2" marine speaker
- Belastbarkeit: 2-75 Watts RMS, 225 Watts Peak Power
- Woofer: Polypropylenmembran mit Gummisicke
- Hochtöner: Grille-mounted 1" polypropylene semi-dome
- Korb: Cast-polymer
- Frequenzgang: 50-20,000 Hz
- Empfindlichkeit: 92 dB
Allgemein
- Artikelgewicht: 8.34 Pfund (Gesamtpaket)
- Paketabmessungen: 16.14 x 12.76 x 10.71 Zoll
- Hersteller: JBL
- Farbe: Schwarz
Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der Ihrem Produkt beiliegenden Garantiekarte oder auf der offiziellen JBL-Website. website. You may also contact JBL customer service directly for assistance with product operation, troubleshooting, or parts.
