1. Einleitung
This manual provides essential instructions for the safe operation, setup, and maintenance of your Sky Viper Fury Stunt Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.
2. Lieferumfang
Packen Sie alle Komponenten sorgfältig aus und überprüfen Sie, ob Sie die folgenden Artikel erhalten haben:
- Sky Viper Fury Stunt Drone
- 3.7V 650mAh Lithium Polymer Battery (for drone)
- Regler
- One Set of Extra Blade Guards
- Ladekabel
- 4 Schrauben
- Schraubendreher
- Bedienungsanleitung (dieses Dokument)
Image 2.1: Contents of the Sky Viper Fury Stunt Drone package, including the drone, controller, and retail box.
3. Einrichtung
3.1 Einlegen und Laden der Batterie
- Drohnenbatterie: Insert the included 3.7V 650mAh lithium polymer battery into the drone's battery compartment. Ensure it is securely connected.
- Controller-Batterien: The controller requires 3 AAA batteries (not included). Open the battery compartment on the back of the controller, insert the batteries according to the polarity indicators, and close the compartment.
- Aufladen des Drohnenakkus: Connect the drone's battery to the charging cable, then connect the charging cable to a USB power source. The charging indicator will show the charging status. Allow approximately 60-90 minutes for a full charge.
3.2 Propeller and Blade Guard Installation
The drone comes with pre-installed propellers. If replacement is needed or if you wish to install blade guards:
- Klingenschutz: Attach the included blade guards to the drone's arms using the provided screws and screwdriver. Ensure they are firmly secured to protect the propellers during flight.
- Propelleraustausch: If a propeller is damaged, carefully remove it and replace it with a new one from a spare set (if available). Ensure the correct propeller type (A or B) is installed on the corresponding motor.
Bild 3.1: Nahaufnahme view of the Sky Viper Fury Stunt Drone and its controller, showing details of the drone's structure.
4. Bedienungsanleitung
4.1 Einschalten und Koppeln
- Turn on the drone by pressing the power button. The LED lights will begin to flash.
- Turn on the controller. The controller's indicator light will flash.
- Move the left joystick (throttle) fully up, then fully down. The drone and controller lights will become solid, indicating successful pairing.
4.2 Kalibrierung
For stable flight, calibrate the drone before each flight or if it drifts. Place the drone on a flat, level surface. Refer to the quick start guide for specific calibration stick commands, typically involving holding both joysticks to a specific corner.
4.3 Grundlegende Flugsteuerung
The Sky Viper Fury Stunt Drone features Surface Scan Technology and improved auto-hover for simplified flight control.
- Launch/Land Button: Press this button for automatic takeoff and landing.
- Linker Joystick (Gas/Gierachse): Steuert die Höhe (aufwärts/abwärts) und die Drehung (links/rechts).
- Rechter Joystick (Neigung/Rolle): Controls forward/backward movement (pitch) and left/right strafing (roll).
Image 4.1: Diagram illustrating the Sky Viper Fury Stunt Drone's features, including 360-degree flips, one-touch stunts, and auto-pilot stages.
4.4 Surface Scan Technology and Auto-Hover
The drone utilizes Surface Scan technology for enhanced stability. A tiny camera sensor on the underside tracks and analyzes surface patterns at nearly 200 times per second. This optical flow process, combined with a built-in barometer, allows the drone to maintain its position and hover with ease, making it simpler to fly in any horizontal direction using a single stick.
Image 4.2: Visual explanation of Surface Scan Optical Ground Tracking, showing how the drone uses a sensor to maintain position hold.
4.5 One-Touch Stunts
The Sky Viper Fury Stunt Drone is capable of performing eight visually impressive one-touch stunts. To activate a stunt, press the dedicated stunt button on the controller and then move the right joystick in the desired direction (e.g., forward for a front flip, left for a barrel roll).
4.6 Dual Flight Modes
The drone offers two flight modes:
- Normalmodus: Provides stable and forgiving flight characteristics, ideal for beginners and indoor use.
- Sportmodus: Increases responsiveness and speed, suitable for experienced pilots and outdoor flying.
Switch between modes using the 'NORMAL/SPORT' button on the controller.
5. Wartung
5.1 Propellerpflege
- Regularly inspect propellers for cracks, bends, or damage. Replace any damaged propellers immediately to ensure stable flight.
- Ensure propellers are clean and free from debris (hair, dust, grass) that could impede rotation.
5.2 Pflege und Lagerung der Batterie
- Verwenden Sie immer das mitgelieferte Ladekabel.
- Die Batterie darf nicht überladen oder vollständig entladen werden.
- Lagern Sie die Batterie an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
- Bei längerer Lagerung sollte der Akku auf etwa 50 % seiner Kapazität geladen werden.
5.3 Allgemeine Reinigung
Use a soft, dry cloth to clean the drone and controller. Avoid using harsh chemicals or solvents. Do not immerse the drone or controller in water.
6. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Drohne lässt sich nicht einschalten. | Drone battery is not charged or not connected. | Charge the drone battery fully and ensure it is properly connected. |
| Der Controller lässt sich nicht einschalten. | Controller batteries are dead or incorrectly installed. | Replace AAA batteries in the controller, ensuring correct polarity. |
| Die Drohne lässt sich nicht mit der Fernsteuerung koppeln. | Pairing sequence not followed correctly. | Ensure both drone and controller are on, then perform the joystick up/down pairing sequence. |
| Drone drifts or flies erratically. | Drone not calibrated; damaged propellers; strong wind (outdoor). | Perform calibration on a flat surface. Inspect and replace damaged propellers. Avoid flying in windy conditions. |
| Kurze Flugzeit. | Akku nicht vollständig geladen; alternder Akku. | Ensure battery is fully charged. Consider replacing the battery if it's old and capacity has diminished. |
| Stunts not performing correctly. | Insufficient altitude; incorrect button sequence. | Ensure drone has enough altitude (at least 6-10 feet). Press stunt button then immediately move joystick in desired direction. |
7. Spezifikationen
- Marke: Sky Viper
- Modellname: Sky Viper FURY Stunt Drone
- Modellnummer: 18378
- Farbe: Schwarz / Grün
- Produktabmessungen: 13.5 Zoll L x 3 Zoll B x 11.5 Zoll H
- Artikelgewicht: 1 Pfund (16 Unzen)
- Material: Plastik
- Batterie: 3.7V 650mAh Lithium-Polymer-Akku (im Lieferumfang enthalten)
- Controller-Batterien: 3 AAA (nicht im Lieferumfang enthalten)
- Konnektivitätstechnologie: W-lan
- Steuerungstyp: Fernbedienung
- Schwierigkeitsgrad: Anfänger
- Vom Hersteller empfohlenes Alter: Ab 12 Jahren
- Optische Sensortechnologie: CMOS (for Surface Scan)
- UPC: 816322019435, 810017183784
- Hersteller: Skyrocket
- Veröffentlichungsdatum: 21. Juni 2023
8. Garantie und Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sky Viper website. The manufacturer, Skyrocket, typically provides details regarding product warranties and service options.
A digital version of this user manual may also be available for download from the manufacturer's support page or via this direct link: Sky Viper Fury Stunt Drone User Manual (PDF)
