Einführung
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Wichtige Sicherheitshinweise
- Lesen Sie vor Installation und Betrieb alle Anweisungen sorgfältig durch.
- Bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.
- Dieses Produkt ist ausschließlich für den Innenbereich bestimmt (Schutzart IP20). Es darf keiner Feuchtigkeit oder extremen Temperaturen ausgesetzt werden.
- Vor Beginn jeglicher Installations- oder Wartungsarbeiten muss die Stromversorgung unterbrochen werden.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Batterien für Kinder unzugänglich aufbewahren. Gebrauchte Batterien umweltgerecht entsorgen.
Packungsinhalt
Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1x Drahtlose Fernbedienung
- 1x Montageanleitung (diese Anleitung)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Setup und Installation
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Bereiten Sie den Installationsbereich vor: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- Schließen Sie den LED-Streifen an: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Stromversorgung anschließen: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Montieren Sie den Controller: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Einschalten: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Bedienungsanleitung
The wireless remote control allows full command over your MaxLED RGBW strips.
Fernbedienungsfunktionen:
Bild: Eine detaillierte view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Power-Taste (O): Press to turn the LED strips On or Off.
- Helligkeits Kontrolle (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Farbrad: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Geschwindigkeitsregelung (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Koppeln der Fernbedienung:
If your remote control is not responding, it may need to be paired with the controller:
- Stellen Sie sicher, dass der Controller eingeschaltet ist.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Wartung
Reinigung:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Batteriewechsel der Fernbedienung:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Suchen Sie das Batteriefach auf der Rückseite der Fernbedienung.
- Open the compartment using a small screwdriver or by sliding the cover.
- Remove the old battery and insert a new one, ensuring correct polarity (+/-).
- Verschließen Sie das Batteriefach fest.
- Entsorgen Sie die alte Batterie entsprechend den örtlichen Vorschriften.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| Fernbedienung reagiert nicht. | Dead battery, remote not paired, out of range. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| Die Farben sind falsch oder uneinheitlich. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Technische Daten
| Marke | Paulmann |
| Modellnummer | 79797 |
| Produktabmessungen (L x B x H) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Gewicht | 102 Gramm |
| IP-Schutzart | IP20 (nur Innengebrauch) |
| Material | Plastik |
| max. Wattage | 144 Watt |
| Bandtage | 24 Volt |
| Lichtquellentyp | LED (for compatible strips) |
| Stromquelle | AC (via external 24V power supply) |
| Besondere Merkmale | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Fernbedienungsfrequenz | 2.4 GHz RF |
| Reichweite der Fernbedienung | Up to 30 meters (non-line-of-sight) |
| Batterien erforderlich (Fernbedienung) | Ja (nicht im Lieferumfang enthalten) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Garantie und Support
Garantie:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann webWebsite oder wenden Sie sich an Ihren Händler.
Kundendienst:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann webWebsite.
Paulmann WebWebsite: www.paulmann.com
