Idatalink Compustar Blade-AL Universal Bypass Integration Transponder Module User Manual

1. Zu Endeview

The Idatalink Compustar Blade-AL is a universal 'all-in-one' integration cartridge designed for seamless integration with Blade-compatible remote start modules, vehicle security, and convenience products. This module acts as an essential intermediary between your remote start system and the vehicle's computer, enabling remote start functionality without compromising factory security. It supports over 4000 vehicle models from 1997 to date, including exclusive KLON firmware applications.

Figure 1: Idatalink Compustar Blade-AL module with its associated wiring harness.

2. Setup and Initial Programming

Before installation, the Blade-AL module requires programming with vehicle-specific firmware. This process is performed using a computer and the Idatalink Weblink Updater.

2.1 Erforderliche Komponenten

• Computer (Windows PC recommended for Internet Explorer compatibility)
• Idatalink ADS-USB (sold separately)
• Compustar Controller (e.g., CM7200)
• Blade-AL Module

Figure 2: The Idatalink ADS-USB cable, essential for module programming.

2.2 Kontoregistrierung

Create an account on the official programming webWebsite: compustar.idatalink.com. It is recommended to complete registration using Internet Explorer and allow ActiveX to be enabled if prompted by the browser.

2.3 Hardware-Anschluss

1. Dock your Blade-AL module into the dedicated slot on your Compustar controller. Ensure it is securely seated.


Figure 3: Inserting the Blade-AL module into the Compustar controller.

2. Plug the ADS-USB cable into an available USB port on your computer.
3. Connect the cable labeled 'Idatalink Module' from the ADS-USB to the black RS232 data port on the Compustar controller.

2.4 Software-Programmierung

Follow these steps to program your module:

1. Launch Internet Explorer and navigate to compustar.idatalink.com.
2. Select the 'Flash Your Module' option on the webWebsite.
3. Once the hardware is detected, you will be directed to the programming home screen.
4. Under 'Vehicle Selection', choose the correct year, make, and model of the vehicle you will be working on.
5. You can either configure specific features for the Blade-AL module or select 'Flash' to load the default settings.
6. The site will confirm 'Flashing Completed!' and provide the appropriate installation guide for download.
7. While the controller is still plugged in, select the 'Remote Starter' tab. Here, you can configure additional features such as remote start run time, programmable outputs, and double pulse unlock. These settings can also be adjusted in the vehicle using an OP500 programmer.
8. This tab also allows you to update the firmware for the controller when available.

3. Bedienung

Once the Blade-AL module and Compustar controller are properly flashed and configured, they will enable remote start and other convenience features for your vehicle. The module seamlessly integrates with your vehicle's immobilizer system, allowing the remote starter to function without requiring a spare key to be left inside the vehicle.

Specific operational details, such as remote start sequence, lock/unlock functions, and trunk release, will depend on the features configured during the programming process and the capabilities of your Compustar remote starter system.

Figure 4: The Blade-AL module facilitates remote functions via the vehicle's key fob or remote starter.

4. Wartung

The Idatalink Compustar Blade-AL module is designed for long-term reliability and typically requires minimal maintenance. To ensure optimal performance and longevity:

• Trocken halten: Das Modul darf nicht mit Feuchtigkeit oder Flüssigkeiten in Berührung kommen.
• Temperaturkontrolle: Do not expose the module to extreme temperatures, either hot or cold.
• Physischer Schutz: Ensure the module is securely mounted within the vehicle to prevent physical damage from vibrations or impacts.
• Firmware-Updates: Überprüfen Sie regelmäßig die compustar.idatalink.com website for new firmware releases that may offer improved performance, bug fixes, or expanded vehicle compatibility.

5. Fehlerbehebung

If you encounter issues with your Blade-AL module or Compustar system, consider the following common points:

• Module Not Detected / Programming Issues:
  Ensure the ADS-USB cable is correctly connected to both the computer and the Compustar controller. Verify that you are using Internet Explorer for the Weblink Updater and that ActiveX is enabled. If issues persist, try a different USB port or computer.
• Remote Start Not Functioning:
  Confirm that the Blade-AL module has been correctly flashed with the appropriate firmware for your specific vehicle year, make, and model. Check all wiring connections between the module, controller, and vehicle. Verify that the remote start features are enabled in the module's configuration settings.
• Fahrzeugkompatibilität:
  While the Blade-AL is universal, specific vehicle models require precise firmware. Ensure the correct firmware is loaded.
• Professionelle Installation:
  The installation and programming of this module can be complex. Eine professionelle Installation wird dringend empfohlen. Many issues arise from incorrect wiring or improper firmware flashing. If you are not experienced with car electronics, seek assistance from a certified installer.
• Zugehörige Dokumente - BLADEAL

  	iDatalink BLADE-AL(TB)-TL-EN Installationsanleitung Ausführliche Installationsanleitung für das iDatalink BLADE-AL(TB)-TL-EN Fernstart- und Transponder-Bypass-System, einschließlich Kabelquerschnittstabellen, Schaltplänen und Programmierverfahren für verschiedene Toyota- und Lexus-Modelle.
  	iDatalink BLADE-AL(DL)-CH5-EN Installationsanleitung Ausführliche Installationsanleitung für das iDatalink BLADE-AL(DL)-CH5-EN Fernstart- und Alarmintegrationsmodul, einschließlich Fahrzeugkompatibilität, Kabelquerschnittstabellen, Schaltplänen und Programmierverfahren für Fahrzeuge von Chrysler, Dodge, Jeep und Mitsubishi.
  	iDatalink BLADE-AL(DL)-HA3-EN Installationsanleitung für Honda- und Acura-Fahrzeuge This installation guide provides detailed instructions for the iDatalink BLADE-AL(DL)-HA3-EN remote starter and integration module. It includes vehicle compatibility charts, wiring diagrams, module programming, and troubleshooting steps for Honda and Acura vehicles.
  	iDatalink BLADE-AL(DL)-CH5-EN Installationsanleitung: Installation des Fernstartsystems Dies ist die offizielle Installationsanleitung für das iDatalink BLADE-AL(DL)-CH5-EN Fernstartsystem. Sie enthält detaillierte Anweisungen, Schaltpläne, Kabelbelegungstabellen, Informationen zur Fahrzeugkompatibilität, Moduldiagnose und Programmierverfahren für verschiedene Fahrzeuge von Chrysler, Dodge, Jeep und Mitsubishi.
  	Installationsanleitung für das iDatalink FTI-CDP1 Bypass-Modul für RAM 1500 (2013-2017) Ausführliche Installations- und Programmieranleitung für das iDatalink FTI-CDP1 Bypass-Modul, entwickelt für RAM 1500 TIP Start Fahrzeuge (Baujahre 2013–2017). Beinhaltet Verkabelung, Konfiguration und Anleitung zur Übernahme des Fernstarts.
  	iDataLink HK2 Transponder-Bypass-Installationsanleitung für Hyundai und Kia Ausführliche Installationsanleitung für das iDataLink HK2 Transponder-Bypass-System, entwickelt für Hyundai- und Kia-Fahrzeuge. Enthält Schaltpläne, Informationen zur Fahrzeugkompatibilität und Programmierhinweise.