Mount Plus MP-LPA36-443W Outdoor Full Motion TV Wall Mount Instruction Manual

Einführung

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of the Mount Plus MP-LPA36-443W outdoor full motion TV wall mount. Designed for televisions ranging from 32 inches to 70 inches, this mount offers robust weather resistance and flexible viewing options for outdoor spaces. Please read all instructions carefully before beginning installation to ensure proper setup and safe use.

Produkteigenschaften

• Haltbarkeit im Außenbereich: High-quality powder-coated finish prevents scratches and rust. The TV mount has successfully passed a 90-hour salt spray test, ensuring resilience in harsh outdoor conditions.
• Korrosionsbeständigkeit: Features stainless steel screws for added protection against salt air, specifically designed for environments near oceans.
• Vielseitiges Design: Engineered for patios, decks, and balconies, providing a weatherproof solution for mounting your TV outdoors.
• Kompatibilität der TV-Größe: Fits most 32-inch to 70-inch televisions.
• VESA-Unterstützung: Compatible with VESA patterns 200x200, 300x200, 300x300, 400x200, 400x300, and 400x400 mm.
• Einstellbar Viewing-Winkel: Offers a tilt range of +10° to -20° and a swivel range of +90° to -90°.
• Adjustable Profile: Extends from 2.4 inches (minimum) to 18.6 inches (maximum) from the wall.
• Hohe Gewichtskapazität: Heavy-duty construction supports TVs up to 110 lbs (50 kg).
• Sicherheitsfunktion: Includes an anti-theft design for enhanced protection in outdoor settings.

Packungsinhalt

Please refer to the product packaging for a complete and accurate list of all included components and hardware. Typically, the package contains:

• Wandplattenbaugruppe
• TV-Halterungen (x2)
• Montagezubehör-Set (Schrauben, Dübel, Unterlegscheiben, Distanzstücke)
• Bedienungsanleitung

Sicherheitshinweise

WARNUNG: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact Mount Plus customer service or a qualified professional installer.

• Gewichtskapazität: Do not exceed the maximum weight capacity of 110 lbs (50 kg). Exceeding this limit can result in instability and potential injury.
• Wandstruktur: Ensure the mounting surface can safely support the combined weight of the mount and the television. For concrete or masonry walls, professional installation is highly recommended.
• Tools & Safety: Always use appropriate tools and wear safety gear during installation.
• Kinder: Halten Sie Kinder und Haustiere vom Installationsbereich fern.
• Schaden: Do not install if the product or any hardware is damaged.

Setup und Installation

Before installation, ensure you have all necessary tools and hardware. It is recommended to have at least two people for safe installation.

Installationsschritte:

1. Wandtyp prüfen: Identify if your wall is made of wood studs, concrete, or masonry. This will determine the appropriate mounting hardware and drilling technique.
2. Bohrpunkte markieren: Position the wall plate assembly on the desired location on the wall. Use a pencil to mark the drilling points. Ensure the wall plate is level using a spirit level.
3. Pilotlöcher bohren: Drill pilot holes at the marked locations. The size and depth of the holes will depend on your wall type and the specific anchors/screws being used.
4. Wandplatte anbringen: Secure the wall plate assembly to the wall using the provided lag bolts and washers. Tighten all fasteners firmly, but do not overtighten.
5. TV-Halterungen anbringen: Secure the two vertical TV brackets to the back of your television using the appropriate VESA-compatible screws, washers, and spacers from the hardware kit. Ensure they are centered and securely fastened.
6. Fernseher montieren: With assistance, carefully lift the television and hook the TV brackets onto the wall plate assembly. Ensure the TV is securely seated. Install the safety screws or locking mechanisms to prevent accidental dislodgement.

Video-Installationsanleitung:

For a visual step-by-step installation guide, please watch the official product video below:

Bedienungsanleitung

The Mount Plus MP-LPA36-443W offers flexible adjustments for optimal viewing.

• Neigungseinstellung: To adjust the vertical tilt angle of your TV, loosen the tilt adjustment knobs on the TV brackets. Carefully tilt the TV to your desired angle (between +10° and -20°), then re-tighten the knobs to secure the position.
• Schwenkeinstellung: To swivel the TV horizontally, gently push or pull the side of the television to rotate it left or right. The mount allows for a wide swivel range of +90° to -90°, depending on TV size and wall clearance.
• Pegeleinstellung: The mount features a post-installation level adjustment of up to ±3°. This allows for minor rotational adjustments to ensure your TV is perfectly horizontal after mounting.

Wartung

Regelmäßige Wartung trägt zur Langlebigkeit und zum sicheren Betrieb Ihrer TV-Halterung bei.

• Befestigungselemente prüfen: Periodically inspect all screws, bolts, and connections to ensure they remain tight. Re-tighten if any looseness is detected.
• Reinigung: Reinigen Sie die Halterung mit einem weichen, fusselfreien Tuch.amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the protective finish.
• Korrosionsinspektion: For outdoor installations, regularly inspect the mount for any signs of wear, rust, or corrosion, especially in areas exposed to moisture or salt air.

Fehlerbehebung

• TV-Niveau nicht: If the TV appears unlevel after installation, use the built-in level adjustment feature (if applicable) or carefully re-adjust the wall plate if necessary. Ensure all mounting points are secure.
• Mount Difficult to Move: Check if any pivot point bolts are overtightened. Loosen them slightly to allow for smoother movement. Do not loosen to the point of instability.
• Das Mount fühlt sich instabil an: Immediately remove the TV from the mount. Re-check all wall and TV fasteners. Verify that the wall structure is adequate for the combined weight and that all installation steps were followed correctly. Consult a professional if uncertainty persists.

Technische Daten

Garantie und Support

For detailed warranty information, technical assistance, or to inquire about replacement parts, please contact Mount Plus customer service. Refer to your product packaging or the official Mount Plus webAuf dieser Website finden Sie die aktuellsten Kontaktdaten und Support-Ressourcen.