1. Produktüberschreitungview
This document provides instructions for the original UHF/VHF dual band antenna, designed for use with various walkie-talkies including the Dynascan DB-48 New, DB-75, DB-8D, and Wouxun KG-UV8. It is compatible with any device utilizing an SMA male connector for its antenna.
Key features of this antenna include:
- Standard antenna design for reliable performance.
- Compatibility with Wouxun KG-UV8D, DYNASCAN DB8D, and DB48 NEW models.
- Frequency range: FM / 136-174 MHz (VHF) / 400-470 MHz (UHF).
Abbildung 1: Voll view of the DynaScan Dual Band UHF/VHF Antenna. This image displays the complete antenna unit, illustrating its overall length and design.
2. Einrichtung und Installation
To install the antenna, ensure your radio or walkie-talkie is powered off. Locate the antenna connector on your device, which should be an SMA female type to match the antenna's SMA male connector. Carefully align the antenna's connector with the device's port and gently screw it clockwise until it is finger-tight. Do not overtighten, as this can damage both the antenna and the device connector.
Abbildung 2: Nahaufnahme view of the antenna's SMA male connector. This image highlights the threaded base of the antenna, which connects to compatible radio devices.
3. Bedienung
This antenna is designed for dual-band operation, covering both UHF (Ultra High Frequency) and VHF (Very High Frequency) ranges, as well as FM. Once properly installed, the antenna will enable your compatible radio device to transmit and receive signals within its specified frequency ranges (136-174 MHz for VHF and 400-470 MHz for UHF). Ensure your radio is configured to the correct frequency band for optimal communication.
4. Pflege und Wartung
To ensure the longevity and optimal performance of your antenna, follow these guidelines:
- Reinigung: Wipe the antenna with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Lagerung: When not in use, store the antenna in a clean, dry place away from extreme temperatures.
- Handhabung: Avoid bending or subjecting the antenna to excessive force, as this can damage the internal elements or the connector.
- Steckerprüfung: Periodically check the SMA connector for any signs of corrosion or damage.
5. Fehlerbehebung
If you experience issues with signal reception or transmission, consider the following:
- Schlechte Signalqualität: Ensure the antenna is securely attached to the radio. Check for any obstructions between your radio and the transmitting/receiving station.
- Kein Signal: Verify that the antenna is correctly installed and not damaged. Confirm that your radio is powered on and tuned to the correct frequency.
- Antennenschaden: If the antenna appears physically damaged (e.g., bent, cracked), it may need replacement.
6. Technische Daten
| Spezifikation | Detail |
|---|---|
| Antennentyp | Dual Band UHF/VHF Radio Antenna |
| Frequenzbereich | FM / 136-174 MHz / 400-470 MHz |
| Steckertyp | SMA-Stecker |
| Länge | 213 mm |
| Impedanz | 50 Ohm |
| Hersteller | Pihernz Comunicaciones |
| Verpackungsabmessungen | 21 x 1 x 1 cm |
| Gewicht | 100 g |
7. Garantieinformationen
This product is covered by the standard manufacturer's warranty. Please refer to the warranty documentation provided with your original radio device or contact the manufacturer for specific details regarding warranty terms and conditions. Keep your proof of purchase for any warranty claims.
8. Kundendienst
For further assistance, technical support, or inquiries regarding this antenna, please contact the retailer where the product was purchased or refer to the support channels provided by DynaScan or Wouxun for your specific radio model. Ensure you have your product details and purchase information ready when contacting support.
