Einführung
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
Sicherheitshinweise
WARNUNG: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- Stellen Sie sicher, dass die Montagefläche das Gesamtgewicht der Halterung und des Fernsehers sicher tragen kann.
- Die maximale Tragfähigkeit von 52 kg (114 lbs) darf nicht überschritten werden.
- Diese Halterung ist für Fernseher mit einer Bildschirmdiagonale zwischen 26 und 75 Zoll ausgelegt.
- Tragen Sie während der Installation geeignete Schutzausrüstung, einschließlich Augenschutz.
- Verwenden Sie immer einen Balkensucher, um Holzbalken genau zu lokalisieren.
- Wenn Sie sich bei irgendeinem Teil der Installation unsicher sind, holen Sie sich professionelle Hilfe.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
Kompatibilitätsprüfung
Vor der Installation überprüfen Sie bitte Folgendes:
- TV-Größe: Your TV must be between 26 and 75 inches.
- Gewicht des Fernsehers: Ihr Fernseher darf nicht mehr als 52 kg (114 lbs) wiegen.
- VESA-Muster: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- Wandtyp: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
Packungsinhalt
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
Das Paket beinhaltet typischerweise:
- Wandplatte
- TV-Halterungen (2 Stück)
- Assorted TV Screws (M4, M6, M8)
- Distanzstücke und Unterlegscheiben
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- Bedienungsanleitung
Setup und Installation
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
Schritt 1: Befestigen Sie die TV-Halterungen am Fernseher
- Legen Sie Ihren Fernseher vorsichtig mit dem Bildschirm nach unten auf eine weiche, saubere Oberfläche, um Kratzer zu vermeiden.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
Schritt 2: Wandplatte an der Wand montieren
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
Schritt 3: Fernseher an der Wandplatte befestigen
- Heben Sie den Fernseher mitsamt den angebrachten Halterungen vorsichtig mit Hilfe einer zweiten Person an.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
Bild: Nahaufnahme view of the anti-drop design, ensuring the TV remains securely attached to the mount.
Bedienungsanleitung
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile Aussehen.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile sehen.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und Sicherheit Ihrer TV-Wandhalterung.
- Regelmäßige Inspektion: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Reinigung: Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
- Schadensprüfung: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Fernseher steht nach der Installation nicht gerade. | Die Wandplatte war bei der Montage nicht waagerecht. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| Der Fernseher passt nicht an die Halterung. | Falsches VESA-Muster oder falsche TV-Größe/-Gewicht. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| Die Halterung wirkt instabil. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
Technische Daten
- Modell: PSML1-E
- Marke: PERLESMITH
- Material: Legierter Stahl
- Farbe: Schwarz
- Installationstyp: Wandhalterung
- Bewegungsart: Behoben
- Kompatible TV-Größen: 26 - 75 Zoll
- Maximale Gewichtskapazität: 52 kg
- VESA-Kompatibilität: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Abstand von der Wand: Ungefähr 30 mm
- Maximaler Neigungswinkel: 8 Degrees (if applicable to specific unit)
- Artikelgewicht: 1.12 Kilogramm
- Paketabmessungen: 43.7 x 11.3 x 4.9 cm
- UPC: 713721601516
Garantie und Support
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
