BOYA RX8Pro Professioneller drahtloser Doppelempfänger – Benutzerhandbuch

1. Einleitung

The BOYA RX8Pro is a professional UHF dual-channel wireless receiver designed for use with DSLR cameras, mirrorless cameras, and video cameras. It offers reliable audio reception for various professional recording scenarios, including interviews and field recordings. This receiver is built with an all-metal construction for durability and features an intuitive interface for ease of use.

2. Produktüberschreitungview

Abbildung 1: Front view of the BOYA RX8Pro Wireless Dual Receiver. It features two flexible antennas, a display screen showing channel information, and control buttons. The BOYA logo is visible at the bottom.

Hauptmerkmale:

• Dual-channel receiver for simultaneous operation of two transmitters.
• 48 selectable UHF channels for interference-free operation.
• 3.5mm locking mini-jack output for secure connection to cameras.
• 3.5mm headphone output for real-time audio monitoring.
• All-metal construction for robust durability.
• LCD display for channel and battery status indication.
• Angetrieben von zwei AA-Batterien.

3. Installationsanleitung

3.1. Einlegen der Batterie

1. Locate the battery compartment on the rear of the RX8Pro receiver.
2. Schieben Sie die Batterieabdeckung auf.
3. Legen Sie zwei AA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
4. Schließen Sie die Batterieabdeckung fest.

3.2. Montage des Empfängers

The RX8Pro includes a detachable shoemount adapter for easy attachment to a camera's hot shoe or cold shoe mount.

1. Attach the shoemount adapter to the bottom of the receiver.
2. Slide the receiver with the shoemount into your camera's hot shoe.
3. Tighten the locking wheel on the shoemount to secure the receiver.
4. Alternatively, use the belt clip for attaching to clothing or a belt.

3.3. Verbindung mit Ihrer Kamera herstellen

Use the provided cables to connect the receiver to your recording device.

• For DSLR/Mirrorless Cameras: Use the locking 3.5mm to 3.5mm cable. Connect one end to the RX8Pro's "OUTPUT" jack and the other end to your camera's microphone input.
• For Professional Camcorders/Mixers: Use the locking 3.5mm mini-jack to XLR cable. Connect the 3.5mm end to the RX8Pro's "OUTPUT" jack and the XLR end to your device's XLR input.

4. Bedienungsanleitung

4.1. Ein-/Ausschalten

Locate the power switch on the side panel of the receiver. Slide it to the "ON" position to power on the device. Slide it to "OFF" to power down.

4.2. Kanalauswahl

The RX8Pro features 48 selectable UHF channels. Ensure the receiver and transmitter (sold separately) are set to the same channel to establish a connection.

1. Press the "SET" button to enter the channel selection mode.
2. Use the "+" or "-" buttons to cycle through available channels.
3. Press "SET" again to confirm your selection.
4. Observe the "LINK" indicator on the receiver; it should illuminate when a successful connection with a transmitter is established.

4.3. Audioüberwachung

Connect headphones to the 3.5mm headphone output jack on the receiver to monitor audio in real-time. This allows you to verify audio quality and levels during recording.

4.4. Anpassung des Ausgangspegels

Adjust the output level of the receiver to match the input sensitivity of your camera or recording device. Refer to your camera's manual for optimal audio input settings.

5. Wartung

• Keep the receiver dry. Do not expose it to water or excessive humidity.
• Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln.
• Wenn das Gerät längere Zeit nicht verwendet wird, entfernen Sie die Batterien, um ein Auslaufen zu verhindern.
• Bewahren Sie den Empfänger an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.

6. Fehlerbehebung

7. Spezifikationen

8. Lieferumfang

• 1 x RX8Pro Professional Wireless Dual Receiver
• 1 x Gürtelclip
• 1 x Locking 3.5mm Mini-Jack to XLR Cable
• 1 x Locking 3.5mm to 3.5mm Cable
• 1 x Detachable Shoemount Adapter
• Benutzerhandbuch (dieses Dokument)

9. Garantie und Support

Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen BOYA-Website. webBesuchen Sie unsere Website oder wenden Sie sich an Ihren Händler vor Ort. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.

BOYA Official WebWebsite: www.boya-mic.com