Anykit NTS500 360° 4-Way Articulating Borescope User Manual

1. Produktüberschreitungview

The Anykit NTS500 Articulating Borescope is an advanced industrial inspection tool designed for detailed visual inspection in hard-to-reach areas. It features a 360° all-way articulating probe, high-definition camera, and compatibility with smartphones for enhanced viewing and recording capabilities.

Figure 1: Anykit NTS500 Articulating Borescope with smartphone attached, demonstrating 4-way articulation.

2. Einrichtung und Installation

2.1 Packungsinhalt

• Anykit NTS500 Borescope Unit
• Articulating Probe (5FT)
• Smartphone-Halterung
• USB-C-Datenkabel
• Micro-USB Data Cable
• Lightning-Datenkabel
• Bedienungsanleitung

2.2 Aufladen des Geräts

Before first use, fully charge the borescope unit. Connect the provided USB-C charging cable to the charging port on the side of the device and to a standard 5V/1A USB power adapter (not included). Do not use fast chargers as they are not supported and may damage the device.

2.3 Anbringen der Smartphone-Halterung

1. Screw the smartphone holder onto the top of the borescope unit until secure.
2. Adjust the holder's base to ensure the smartphone is correctly oriented for viewing.
3. Place your smartphone securely into the holder.

2.4 App-Installation und Verbindung

The Anykit NTS500 requires the "USEE" app for smartphone integration. The app is compatible with iPhone (iOS 10.0+) and Android (7.0+) devices.

1. Download the "USEE" App: Suchen nach "USEE" in your device's app store (iOS App Store or Google Play Store) or scan the QR code provided in the included manual.
2. Installiere die App: Follow the on-screen instructions to install the app. Grant necessary permissions for media access.
3. Connect to Borescope: Use the appropriate USB data cable (USB-C, Micro-USB, or Lightning) to connect your smartphone to the borescope unit's data port.
4. App starten: Open the "USEE" app. The live feed from the borescope camera should appear on your smartphone screen.

Figure 2: The borescope unit with a smartphone attached, demonstrating connectivity.

3. Bedienungsanleitung

3.1 Ein-/Ausschalten

• To power on the borescope, press and hold the power button located on the front of the unit until the indicator light illuminates.
• Zum Ausschalten den Netzschalter erneut gedrückt halten, bis die Kontrollleuchte erlischt.

3.2 Einstellen der LED-Leuchten

The borescope probe is equipped with adjustable LED lights to illuminate inspection areas. Press the light control button (often integrated with the power button or a dedicated button on the unit) to cycle through three brightness levels: dim, medium, and bright. Pressing a fourth time will turn the lights off.

Figure 3: The waterproof probe featuring adjustable LED lights for optimal visibility.

3.3 Bewegen der Kamerasonde

The borescope features a 360° all-way articulating probe with a 180° bending angle, controlled by a joystick on the main unit. Move the joystick in the desired direction to bend the probe tip and navigate through complex spaces.

3.4 Umschalten zwischen Front- und Seitenkamera

The probe is equipped with both a front-facing and a side-facing camera. To switch between cameras, locate the dedicated camera switch button on the probe cable or the main unit (refer to the app interface for specific controls). This allows for versatile viewing angles without repositioning the entire probe.

3.5 Fotos und Videos aufnehmen

Use the dedicated photo/video button on the borescope unit or within the "USEE" app to capture images or record video footage. A quick press typically takes a photo, while a longer press initiates video recording. All media is saved to the connected smartphone or the device's internal storage (if applicable).

4. Wartung

4.1 Reinigung des Kameraobjektivs

After each use, especially in dirty or oily environments, gently clean the camera lens with the provided cleaning cloth or a soft, lint-free cloth. Ensure no debris obstructs the lens for clear imaging.

4.2 Abdichtung

The borescope probe and main unit are rated IP67 waterproof, making them resistant to water and various liquids. This allows for safe operation in moist or wet environments. After use in wet conditions, wipe the device dry before storage.

4.3 Hochtemperaturschutz

The device features a smart high-temperature protection system. If the probe encounters excessively high temperatures, the unit will automatically shut down to prevent damage. Allow the probe to cool down before resuming operation.

4.4 Kabelpflege

The flexible metal tube of the probe is designed to be wear-resistant and temperature-resistant. Avoid sharp bends or excessive force that could damage the internal wiring. Coil the cable loosely for storage to prevent kinks.

Figure 4: The semi-rigid snake cable, designed for durability and flexibility.

5. Fehlerbehebung

• No Camera Connected: Ensure the probe is securely attached to the main unit and the data cable is firmly connected to both the borescope and your smartphone. Restart the app and the borescope unit.
• Verschwommenes Bild: Clean the camera lens with a soft cloth. Ensure adequate lighting using the adjustable LED lights.
• Gerät lässt sich nicht einschalten: Check battery level. Recharge the device if the battery is low.
• App erkennt Gerät nicht: Verify that the "USEE" app has all necessary permissions granted on your smartphone. Try restarting your smartphone and the borescope.

6. Spezifikationen

7. Garantie und Support

Anykit guarantees hassle-free replacements for any issues encountered during usage. For technical support, warranty claims, or any questions regarding your Anykit NTS500 borescope, please refer to the contact information provided on the "Thank You" card included in your product packaging. You may also visit the official Anykit webWebsite für weitere Unterstützung.