Einführung
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
Sicherheitshinweise
Beachten Sie stets die folgenden Sicherheitsrichtlinien, um Stromschläge, Brände oder Verletzungen zu vermeiden:
- Stellen Sie vor der Installation oder Wartung sicher, dass die Stromversorgung unterbrochen ist.
- Die Installation sollte von einem qualifizierten Elektriker gemäß den örtlichen Elektrovorschriften durchgeführt werden.
- Setzen Sie das l nicht ausamp übermäßiger Feuchtigkeit oder extremen Temperaturen.
- Versuchen Sie nicht, das l zu öffnen oder zu verändern.amp housing, as this may void the warranty and pose a safety risk.
- Bewahren Sie Verpackungsmaterialien außerhalb der Reichweite von Kindern auf.
Packungsinhalt
Prüfen Sie, ob alle Komponenten vorhanden und unbeschädigt sind:
- Beghelli 19432 LED-Notfall-Lamp Einheit
- Integrated Li-Fe Battery
- Montagezubehör (Schrauben, Dübel)
- Benutzerhandbuch (dieses Dokument)
Setup und Installation
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- Wählen Sie einen Standort: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- Bereiten Sie die Montagefläche vor: Ensure the wall surface is clean, dry, and capable of supporting the lampGewicht.
- Bohrpunkte markieren: Verwenden Sie das lamp's mounting holes as a template to mark the drilling points on the wall.
- Bohrlöcher: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- Dübel einsetzen: Stecken Sie die mitgelieferten Dübel in die Bohrlöcher.
- Montieren Sie das Lamp: Sichern Sie das lamp Befestigen Sie es mit den mitgelieferten Schrauben an der Wand. Achten Sie darauf, dass es fest sitzt.
- Strom anschließen: Verbinden Sie dasamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- Grundgebühr: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.
Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
Bedienungsanleitung
The Beghelli 19432 operates automatically:
- Normalbetrieb: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- Notfallmodus: Im Falle eines Stromausfalls wird die lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- Zurück zur Normalität: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
Wartung
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- Reinigung: Reinigen Sie das lampReinigen Sie die Außenseite mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Batterieprüfung: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- Batteriewechsel: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp Ersatz: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
Fehlerbehebung
In der folgenden Tabelle finden Sie häufig auftretende Probleme und deren Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lamp leuchtet nicht bei Stromausfalltage. | Battery not charged or faulty. Falsche Verkabelung. Lamp Fehler. | Stellen Sie sicher, dass lamp has been connected to power for at least 24 hours. Überprüfen Sie die Kabelverbindungen. Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an qualifiziertes Servicepersonal. |
| Lamp bleibt ständig an. | Main power supply issue. Interner Fehler. | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | Batterieverschlechterung. Unzureichende Ladung. | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | 19432 |
| Marke | Beghelli |
| Lichtquelle | LED |
| Lichtstrom | 1200 Lumen |
| Energieaufnahme | 24 Watt |
| Akku-Typ | Li-Fe (Lithium Iron) |
| Material | Policarbonato (Polycarbonate) |
| Farbe | Weiß |
| Anwendungsbereich | Commercial, Emergency Exit |
| Montagetyp | Wall Mount (Parete) |
| Schaltertyp | Automatisch |
| Zuerst verfügbar | 16. Mai 2019 |
Garantie und Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webauf der Website oder auf der Produktverpackung.
Recycling-Informationen: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp Recycling und Entsorgung von kaputten oder beschädigten lamps can often be found on the manufacturer's website or through local waste management services.
