Einführung
The Fluid Audio FX50 is a 5-inch single point source coaxial reference monitor, designed for professional audio production and critical listening environments. This bi-amplified monitor delivers 90 watts of power with a frequency response of 49Hz to 22kHz (+/-3db). Its unique coaxial driver design ensures a coherent soundstage and precise imaging, making it an ideal tool for mixing and mastering.
Zu den Hauptmerkmalen gehören:
- 5-inch Coaxial Studio Monitor
- Frequency response: 49Hz – 22KHz (+/- 3db)
- Crossover frequency: 2.9KHz
- Class D and DSP powered amplifizierung
- Dual concentric "coaxial" driver for accurate sound reproduction
Produkt überview
The FX50 monitor features a robust design with a front-loaded slot port for optimized bass output. The coaxial driver places the tweeter in the center of the woofer, creating a single point source for all frequencies, which enhances stereo imaging and depth of field.
Aufstellen
Proper setup is crucial for optimal performance of your FX50 monitors. Ensure the monitors are placed on a stable surface, ideally at ear level, and equidistant from your listening position to create an equilateral triangle. The rear panel offers various input and control options.
Verbindungen:
- XLR-Eingang: Für symmetrische Audioverbindungen von professionellen Audio-Interfaces oder Mischpulten.
- TRS-Eingang: For balanced or unbalanced 1/4-inch connections.
- Cinch-Eingang: For unbalanced audio connections from consumer-grade equipment.
- Leistungsaufnahme: Connect the provided power cable to a suitable AC outlet.
Ensure the monitor's power switch is in the 'Off' position before making any connections. Once all audio cables are securely connected, you can switch the monitor 'On'.
Betrieb
The FX50 monitors provide several controls on the rear panel to tailor their sound to your listening environment.
Steuerung:
- Lautstärkeregler: Adjusts the overall output level of the monitor. Start with a low setting and gradually increase to a comfortable listening level.
- EQ Dip Switches: These switches allow for acoustic adjustments to compensate for room acoustics or personal preference. Refer to the labels on the rear panel for specific settings.
- HF Shelf (Switches 1-2): Adjusts high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Mid EQ (Switches 3-4): Adjusts mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Acoustic Space (Switches 5-6): Compensates for bass buildup when monitors are placed near walls or corners. Options typically include 0dB, -1dB, -2dB, -4dB.
- Low Freq Cutoff (Switches 7-8): Applies a high-pass filter to cut off low frequencies, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.
- Stromschalter: Schaltet den Monitor ein oder aus.
Wartung
To ensure the longevity and optimal performance of your Fluid Audio FX50 monitors, follow these maintenance guidelines:
- Reinigung: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the monitor.
- Platzierung: Keep monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units.
- Handhabung: Handle with care. Avoid dropping or subjecting the monitors to strong impacts.
- Leistung: Disconnect the power cable from the wall outlet if the monitors will not be used for an extended period.
Fehlerbehebung
If you encounter issues with your FX50 monitors, refer to the following common troubleshooting steps:
- Kein Ton:
- Check all power connections and ensure the monitor is switched on.
- Verify that audio cables are securely connected to both the monitor and the audio source.
- Stellen Sie sicher, dass der Lautstärkeregler am Monitor und an Ihrer Audioquelle aufgedreht ist.
- Testen Sie es mit einer anderen Audioquelle oder einem anderen Kabel, um einen Gerätefehler auszuschließen.
- Zischendes Geräusch:
- A slight hiss can be normal at high volume settings with no input. Reduce the monitor's volume if the hiss is excessive.
- Ensure you are using balanced cables (XLR or TRS) for longer runs to minimize interference.
- Check for ground loops by ensuring all audio equipment is plugged into the same power strip or outlet.
- Verzerrter Klang:
- Lower the input level from your audio source or the monitor's volume.
- Prüfen Sie, ob die Kabel beschädigt sind.
- Ensure the EQ dip switches are not set to extreme values that might cause clipping.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Modellname | FX50 |
| Lautsprechertyp | Dual concentric "coaxial" driver |
| Empfohlene Verwendung | Professional Audio Production and Critical Listening |
| Kompatible Geräte | Laptop, MP3-Player, Smartphone, Tablet |
| Woofer-Durchmesser | 5 Zoll |
| Surround Sound-Kanalkonfiguration | 2.0 |
| Farbe | Schwarz |
| Im Lieferumfang enthaltene Komponenten | XLR, TRS, RCA cables |
| Artikelgewicht | 8.15 Pfund |
| Stromquelle | Kabelgebundene Elektrik |
| Kontrollmethode | Remote (referring to EQ dip switches and volume knob) |
| Konnektivitätstechnologie | XLR, TRS, Cinch |
| Audioausgabemodus | Stereo |
| Montagetyp | Tischhalterung |
| Technische Daten | 9.06 x 6.93 x 9.21 Zoll |
| Maximale Lautsprecherausgangsleistung | 90 Watt |
Official Product Video (FX80 Series Overview)
Garantie und Support
The Fluid Audio FX50 monitor comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to obtain service, please refer to the warranty card included with your product or visit the official Fluid Audio webWebsite.
Für weitere Unterstützung, technischen Support oder um view additional product resources, please visit the Fluid Audio Store on Amazon or the official Fluid Audio webWebsite.
