1. Produktüberschreitungview
This manual provides instructions for the ANZZI 2753WILWD Walk-In Bathtub. This model is designed for comfort and therapeutic benefits, featuring a right-hand drain and door configuration. It integrates advanced hydro-therapeutic and aero-therapeutic massage systems, an inline heater, and chromatherapy lighting to enhance the bathing experience. Safety features include a low entry threshold, built-in grab bars, and slip-resistant flooring.
Abbildung 1: Draufsicht view of the ANZZI 2753WILWD Walk-In Bathtub, highlighting the control panel, jets, and interior design.
2. Wichtige Sicherheitshinweise
Read all instructions before installation and use. Failure to follow these instructions could result in electric shock, fire, or serious injury.
- Elektrische Sicherheit: The bathtub requires a dedicated 110-volt electrical supply with two separate 20-amp circuit breakers for optimal and safe operation of the heater and motor. All electrical connections must be performed by a qualified, licensed electrician in accordance with local and national electrical codes.
- Professionelle Installation: Installation of this walk-in bathtub involves plumbing and electrical work. It is strongly recommended that installation be performed by licensed professionals (plumber and electrician) to ensure proper function and compliance with all applicable codes.
- Strukturelle Unterstützung: The bathtub, when filled, can weigh approximately 1000 pounds (including 93.79 gallons of water and the unit's weight of 320 pounds). Ensure that the floor and joists in the installation area are adequately reinforced to support this weight. Consult a structural engineer if unsure.
- Wassertemperatur: Exercise caution with water temperature. Prolonged immersion in water hotter than 104°F (40°C) can be hazardous to your health.
- Chemikalien: Use only approved cleaning agents and bath additives. Avoid abrasive cleaners or harsh chemicals that may damage the acrylic surface or internal components.
- Children and Individuals with Health Conditions: Supervise children at all times. Individuals with heart conditions, diabetes, high or low blood pressure, or other health concerns should consult a physician before using the bathtub.
3. Einrichtung und Installation
Proper installation is critical for the safe and efficient operation of your ANZZI walk-in bathtub. This section outlines key considerations.
3.1 Checkliste vor der Installation
- Verify floor structural integrity to support the filled tub's weight.
- Ensure dedicated 110V electrical lines with two 20-amp breakers are available.
- Confirm plumbing for hot/cold water supply and drainage is accessible.
- Unpack and inspect the tub for any shipping damage.
3.2 Installationsschritte (Fachmann empfohlen)
- Positionierung: Carefully move the bathtub to its final location. The 2753WILWD model is a freestanding unit with a right-hand drain and door.
- Nivellierung: Stellen Sie die Füße der Badewanne so ein, dass sie absolut waagerecht steht.
- Sanitäranschlüsse: Connect the hot and cold water supply lines to the tub's quick-fill faucet. Connect the drain to your household drainage system. Note that plumbing adapters are not included and may need to be sourced separately by your plumber.
- Elektrische Anschlüsse: A licensed electrician must connect the tub's electrical wiring to the dedicated 110V, 20-amp circuits. Refer to the wiring diagram provided with the tub for specific connections.
- Extension Kit: If installing in a 60-inch retro-fit space, utilize the included 7-inch extension kit to ensure a proper fit.
- Dichtheitsprüfung: Before sealing the tub in place, fill it with water and operate all functions (jets, heater) to check for any leaks.
Figure 2: Technical drawing illustrating the dimensions and layout of the ANZZI 2753WILWD Walk-In Bathtub.
4. Bedienungsanleitung
Your ANZZI walk-in bathtub offers a range of features for a customized bathing experience. Familiarize yourself with the controls before use.
4.1 Bedienfeld vorbeiview
The digital control pad and various knobs on the tub's deck allow you to manage all functions.
Abbildung 3: Ausführlich view of the digital control pad, hot/cold water mixer, jet intensity valve, and quick-fill faucet with extendable hand shower.
4.2 Die Badewanne füllen
- Close the tub door securely.
- Turn the hot/cold water mixer to your desired temperature.
- Engage the Quick Fill faucet. This system rapidly fills the tub.
- Monitor the water level and turn off the faucet once the desired level is reached, ensuring jets are submerged if you plan to use them.
4.3 Using Massage Systems
- Whirlpool Massage Jets: Activate the 12 hydro-therapeutic whirlpool jets via the digital control pad. Adjust the jet intensity using the dedicated valve.
- Acu-Stream Air Jets: Activate the 18 aero-therapeutic air jets via the digital control pad for a gentler, bubbling massage.
4.4 Sonderfunktionen
- Inline Maintenance Heater: This feature helps maintain the water temperature at a comfortable level during your bath. Activate it via the digital control pad.
- Aromatherapie: Add your preferred aroma oils to the designated aromatherapy dispenser (if applicable) to infuse the bath with fragrance.
- Chromatherapy (LED Lights): Reinvigorate your mind and body with the soothing radiance of chromatherapy colored light bathing. Select your desired color or cycle through options using the digital control pad.
- Handheld Shower: The Euro-Grip handheld shower head features a 60-inch reach and multiple spray settings (full body, massage stream, misting). Select your desired setting directly on the shower head.
Figure 4: The chromatherapy feature illuminates the bathwater with various colored lights, controlled via the digital panel.
Figure 5: The handheld shower offers three distinct spray settings for a personalized showering experience.
5. Wartung
Regular maintenance ensures the longevity and optimal performance of your walk-in bathtub.
- Reinigen der Wanne: Clean the acrylic surface with a soft cloth and a non-abrasive, mild bathroom cleaner. Avoid harsh chemicals, abrasive pads, or solvents that can damage the finish.
- Jet-Reinigung: Periodically run the jets with a tub cleaner specifically designed for jetted tubs to prevent buildup in the lines. Follow the cleaner's instructions.
- Abflusswartung: Regularly check and clean the drain to prevent blockages and ensure efficient water drainage.
- Türsiegel: Inspect the door seal for any signs of wear or damage. A clean and intact seal is crucial for preventing leaks. Clean the seal with a soft cloth and mild soap.
- Faucet and Shower Head: Clean chrome fixtures with a soft cloth and mild soap. Remove mineral deposits from the shower head nozzles as needed.
6. Fehlerbehebung
Dieser Abschnitt behandelt häufig auftretende Probleme. Sollten Ihre Probleme hier nicht aufgeführt sein, wenden Sie sich bitte an den Kundensupport.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Tub does not fill or fills slowly | Water supply valves closed; low water pressure; Quick Fill faucet obstruction. | Ensure water supply valves are fully open. Check household water pressure. Inspect Quick Fill faucet for debris. |
| Jets not operating | Power supply issue; water level too low; jet pump not activated; air intake blocked. | Check circuit breakers. Ensure water level is above jets. Activate jet pump via control panel. Clear any obstructions from air intakes. |
| Water not draining or draining slowly | Drain stopper closed; drain obstruction. | Ensure drain stopper is fully open. Clear any hair or debris from the drain. |
| Water temperature not maintained | Inline heater not activated; heater malfunction; insufficient electrical supply. | Activate inline heater via control panel. Verify dedicated 20-amp breaker for heater is functional. Contact support if issue persists. |
| Digital control pad unresponsive | Power interruption; control panel malfunction. | Check circuit breakers. Try resetting power to the tub. If unresponsive, contact customer support. |
7. Produktspezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 2753WILWD |
| Abmessungen (L x B x H) | 52.5" x 26.5" x 40" |
| Material | Acryl |
| Installationstyp | Freistehende |
| Abflussort | Rechte Seite |
| Wasserkapazität | Ca. 93.79 Gallonen |
| Artikelgewicht (leer) | 320 Pfund |
| Elektrische Anforderungen | 110 Volts, 2800 Watts (requires two dedicated 20-amp Schaltungen) |
| Whirlpool-Düsen | 12 Hydro-therapeutic massage jets |
| Luftdüsen | 18 Acu-Stream aero-therapeutic air jets |
| Heizung | Inline maintenance heater |
| Dusche | 6-Setting Handheld Shower with 60" reach |
| Zusätzliche Merkmale | Aromatherapy, Chromatherapy LED Lighting, Quick Fill Faucet, ADA Compliant Grab Bars, ADA Compliant Seat, Slip-Resistant Flooring, Low Entry Threshold (4.25") |
8. Garantie und Support
For specific warranty details regarding your ANZZI 2753WILWD Walk-In Bathtub, please refer to the warranty card included with your product or visit the official ANZZI website. ANZZI is committed to providing a world-class responsive support team to assist with any inquiries or issues you may have.
Kontaktinformationen: Please refer to your purchase documentation or the ANZZI webHier finden Sie die aktuellsten Kontaktdaten unseres Kundenservice.
