Einführung
The Henry Xtra 160 HVX160 is a versatile and powerful canister vacuum cleaner designed for efficient cleaning of various surfaces. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Henry Xtra 160 vacuum.
Figure 1: The NaceCare Henry Xtra 160 Canister Vacuum with hose and floor tool.
Hauptmerkmale:
- Powerful 680 watt motor (0.9 HP) for strong suction.
- Includes Turbo Brush for effective carpet cleaning and hair pickup.
- Specialist hard-floor tool for optimal performance on hard surfaces.
- MicroTex filters provide 99.97% filtration down to 0.3 micron for improved air quality.
- Large 1.6 gallon capacity for extended cleaning sessions.
- Whisper quiet operation, suitable for various environments.
- Self-seal tab on bags for dust-free emptying.
- Convenient on-board accessory storage.
Wichtige Sicherheitsinformationen
Lesen und verstehen Sie vor der Benutzung des Geräts stets alle Sicherheitshinweise und Anweisungen. Die Nichtbeachtung der Hinweise und Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.
- Verwenden Sie das Gerät nicht, wenn das Netzkabel oder der Stecker beschädigt sind.
- Nehmen Sie keine entflammbaren oder brennbaren Flüssigkeiten wie Benzin auf und verwenden Sie sie nicht in Bereichen, in denen sie vorhanden sein könnten.
- Heben Sie keine brennenden oder rauchenden Gegenstände auf, z. B. Zigaretten, Streichhölzer oder heiße Asche.
- Erlauben Sie Kindern nicht, den Staubsauger zu bedienen.
- Vor Wartungs- oder Reinigungsarbeiten muss der Staubsauger immer vom Stromnetz getrennt werden.
- Vor der Inbetriebnahme sicherstellen, dass alle Filter korrekt installiert sind.
Einrichtung und Montage
1. Auspacken:
Carefully remove all components from the packaging. Retain packaging for future storage or transport. Verify that all parts listed in the "What's in the Box" section are present.
2. Schlauch anschließen:
- Suchen Sie den flexiblen Schlauch.
- Insert the hose cuff into the suction inlet on the front of the vacuum unit until it clicks securely into place.
3. Assembling the Wand and Floor Tool:
- Connect the two chrome wand sections together.
- Attach the curved handpiece to the top of the assembled wand.
- Select the desired floor tool (Turbo Brush for carpets or hard-floor tool for hard surfaces).
- Attach the chosen floor tool to the bottom of the assembled wand.
- Insert the curved handpiece into the end of the flexible hose.
Figure 2: The Henry Xtra 160 vacuum shown with its comprehensive accessory kit, including hose, wands, and various floor tools.
4. Installing the Dust Bag:
The Henry Xtra 160 uses disposable dust bags. Ensure a bag is correctly installed before operation.
- Unclip and remove the motor head from the canister.
- Ensure the MicroTex filter is properly seated.
- Slide the cardboard collar of a new dust bag onto the inlet tube inside the canister. Ensure the bag is fully open and positioned correctly within the canister.
- Replace the motor head, ensuring it is securely clipped.
Betrieb
1. Ein-/Ausschalten:
Plug the power cord into a suitable electrical outlet. The Henry Xtra 160 features an automatic cord rewind system. To operate, press the red ON/OFF switch located on the top of the motor head.
2. Using the Floor Tools:
- Turbobürste: Ideal for carpets and picking up pet hair. The air-driven brush agitates carpet fibers for deeper cleaning.
- Hard-Floor Tool: Designed for optimal suction and maneuverability on hard surfaces such as wood, tile, and laminate.
Figure 3: The Henry Xtra 160's Turbo Brush effectively cleaning a carpeted surface.
Figure 4: The Henry Xtra 160's hard-floor tool efficiently cleaning debris from a tiled floor.
3. Zubehör verwenden:
The Henry Xtra 160 comes with a variety of accessories for different cleaning tasks. These can be attached directly to the curved handpiece or the wand.
- Fugendüse: For narrow spaces, corners, and edges.
- Staubwedel: For delicate surfaces, shelves, and upholstery.
- Polsterdüse: For furniture and fabric surfaces.
Wartung
Regular maintenance ensures optimal performance and extends the life of your Henry Xtra 160 vacuum.
1. Replacing the Dust Bag:
Replace the dust bag when it is full or when suction power noticeably decreases. The self-seal tab on the bag ensures dust-free disposal.
- Ziehen Sie den Staubsauger aus der Steckdose.
- Unclip and remove the motor head.
- Carefully pull the cardboard collar of the full dust bag off the inlet tube. Use the self-seal tab to close the bag opening.
- Dispose of the full bag responsibly.
- Install a new dust bag as described in the "Setup and Assembly" section.
- Ersetzen Sie den Motorkopf.
2. Reinigung der Filter:
The MicroTex filter provides excellent filtration. Periodically check and clean the filter to maintain suction and air quality.
- Trennen Sie das Vakuum.
- Den Motorkopf entfernen.
- Gently remove the MicroTex filter.
- Tap the filter gently over a waste bin to dislodge dust. Do not wash the filter unless specified by the manufacturer.
- Reinstall the filter, ensuring it is correctly seated before replacing the motor head.
3. Cleaning the Turbo Brush:
Hair and debris can become tangled around the brush roll. Regularly inspect and clean the brush roll for optimal performance.
- Unplug the vacuum and detach the Turbo Brush from the wand.
- Using scissors, carefully cut away any tangled hair or threads from the brush roll.
- Entfernen Sie die Trümmer.
4. Allgemeine Reinigung:
Wischen Sie die Außenseite des Staubsaugers mitamp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
Fehlerbehebung
If you encounter issues with your Henry Xtra 160, refer to the table below for common problems and their solutions.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Staubsauger lässt sich nicht einschalten. | Keine Stromversorgung. Netzschalter aus. | Prüfen Sie, ob der Stecker fest in der Steckdose steckt. Ensure the ON/OFF switch is pressed. Überprüfen Sie die Sicherung/den Leitungsschutzschalter im Haus. |
| Saugkraftverlust. | Voller Staubbeutel. Clogged hose/wand/tool. Schmutziger Filter. | Tauschen Sie den Staubbeutel aus. Check and clear any blockages in the hose, wand, or floor tool. Clean or replace the MicroTex filter. |
| Ungewöhnliche Geräusche während des Betriebs. | Obstruction in brush roll (Turbo Brush). Loses Bauteil. | Inspect and clear any debris from the Turbo Brush roll. Ensure all attachments and the motor head are securely fitted. |
| Staub entweicht aus Vakuum. | Dust bag not installed correctly or damaged. Filter not seated properly. | Check dust bag installation; replace if damaged. Ensure MicroTex filter is correctly and securely in place. |
Technische Daten
- Modell: 908423
- Marke: Numatic
- Hersteller: NaceCare
- Produktabmessungen: 19 x 22 x 16 Zoll
- Artikelgewicht: 18 Pfund
- Motorleistung: 680 watts (0.9 HP)
- Filtertyp: HEPA Filter (MicroTex)
- Enthaltene Komponenten: Accessory Kit (Hose, Wands, Turbo Brush, Hard-Floor Tool, Crevice Tool, Dusting Brush, Upholstery Nozzle)
- Besonderheit: Automatischer Kabelrücklauf
- Kabellos: NEIN
Garantie und Support
Garantieinformationen:
For specific warranty details, please refer to the warranty card included with your product or contact NaceCare customer service. Keep your proof of purchase for warranty claims.
Kundendienst:
If you require further assistance or have questions not covered in this manual, please contact NaceCare customer support. Contact information can typically be found on the manufacturer's webauf der Website oder auf der Produktverpackung.
