Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Einleitung

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Sicherheitshinweise

• Lesen Sie vor Installation und Betrieb alle Anweisungen sorgfältig durch.
• Der Sensor darf keiner direkten Sonneneinstrahlung, extremen Temperaturen oder hoher Luftfeuchtigkeit ausgesetzt werden.
• Stellen Sie sicher, dass das Gerät an einem stabilen Ort installiert ist, um ein versehentliches Herunterfallen zu verhindern.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Montagehalterung
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Schnellstartanleitung (dieses Handbuch)

4. Produktüberschreitungview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Abbildung 1: Front view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Schlüsselkomponenten:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED-Anzeige: Provides status feedback (e.g., detection, low battery).
• Batteriefach: Beherbergt die Stromquelle.
• Befestigungspunkte: For secure installation on a wall.
• Tamper Schalter: Triggers an alarm if the sensor cover is opened.

5. Einrichtung

5.1. Einlegen der Batterie

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Montage des Sensors

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Verwenden Sie die Montagehalterung als Schablone, um die Schraubenpositionen an der Wand zu markieren.
3. Bohren Sie an den markierten Stellen Löcher und setzen Sie die Dübel ein.
4. Befestigen Sie die Montagehalterung mit den mitgelieferten Schrauben an der Wand.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Betrieb des Sensors

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED-Anzeigestatus

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Kein Licht: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view anstatt direkt darauf zuzugehen.

7. Wartung

7.1. Reinigung

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Batteriewechsel

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Regelmäßige Kontrollen

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Fehlerbehebung

9. Spezifikationen

• Marke: Intelbras
• Modell: IVP2000SF
• Energiequelle: Batteriebetrieben
• Akku-Typ: Alkalisch
• Montageart: Wandhalterung
• Kompatible Geräte: Intelbras security systems and smart home hubs
• Produktabmessungen: Ungefähr 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 Zoll)
• Nachweismethode: Passives Infrarot (PIR)
• Erfassungsbereich: Bis zu 12 Meter (39 Fuß)
• Erfassungswinkel: Etwa 90 Grad
• Betriebsumgebung: Nur für den Innenbereich geeignet.

10. Garantieinformationen

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

11. Unterstützung

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• WebWebsite: Visit the official Intelbras webWebsite mit Support-Ressourcen, FAQs und Kontaktinformationen.
• Telefon: Refer to the contact section on the Intelbras webWebseite für lokale Supportnummern.