Einhell TE-AC 135/24 Silent Plus

Einhell TE-AC 135/24 Silent Plus Compressor User Manual

Model: TE-AC 135/24 Silent Plus (4020610)

1. Einleitung

The Einhell TE-AC 135/24 Silent Plus compressor is a versatile and quiet air compressor designed for various tasks in your garage or workshop. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Key features include a powerful 750 W motor, a 24-liter air tank, and a remarkably low noise level of 57 dB (LpA sound pressure), making it significantly quieter than standard compressors. Its oil-free pump design ensures minimal maintenance requirements.

Einhell TE-AC 135/24 Silent Plus Compressor banner

Image: Einhell TE-AC 135/24 Silent Plus Compressor overview.

2. Sicherheitshinweise

Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

2.1 Allgemeine Sicherheit

2.2 Elektrische Sicherheit

3. Produktüberschreitungview

Familiarize yourself with the components of your Einhell TE-AC 135/24 Silent Plus compressor.

Einhell TE-AC 135/24 Silent Plus Compressor

Bild: Vorderseite view of the Einhell TE-AC 135/24 Silent Plus Compressor.

Einhell TE-AC 135/24 Silent Plus Compressor black model

Bild: Vollständig view of the black model of the Einhell TE-AC 135/24 Silent Plus Compressor.

3.1 Schlüsselkomponenten

Close-up of compressor controls and gauges

Bild: Nahaufnahme view of the pressure gauges and control knobs on the compressor.

Detaillierte view of pressure gauges

Bild: Detailliert view of the two pressure gauges, showing PSI and Bar readings.

3.2 Silent and Oil-Free Design

This compressor features an oil-free motor, eliminating the need for oil changes and reducing maintenance. Its advanced design results in a low noise output of 57 dB, making it suitable for environments where noise reduction is important.

57 dB Silent Compressor

Image: Graphic indicating 57 dB sound pressure level.

Oil-free, No Service Motor

Image: Graphic indicating oil-free and no-maintenance motor.

4. Einrichtung

Follow these steps for initial setup of your compressor.

  1. Auspacken: Carefully remove the compressor from its packaging. Inspect for any damage during transit.
  2. Platzierung: Place the compressor on a stable, level surface. The vibration-damping feet should be in full contact with the ground. Ensure adequate ventilation around the unit.
  3. Elektrischer Anschluss: Connect the power cable to a grounded 220 Volt power outlet. Ensure the power switch is in the "OFF" position before plugging in.
  4. Erstprüfung: Before first use, ensure all connections are secure and the drain valve is closed.

5. Bedienungsanleitung

This section details how to operate your compressor for various applications.

5.1 Starten des Kompressors

  1. Stellen Sie sicher, dass das Netzkabel fest eingesteckt ist.
  2. Turn the power switch to the "ON" position. The compressor will start to fill the air tank until the maximum pressure (8 bar) is reached, then it will automatically shut off.
  3. Monitor the tank pressure gauge to confirm it reaches the desired level.

5.2 Einstellen des Ausgangsdrucks

  1. Attach your air tool to the quick coupling.
  2. Use the pressure reducer knob to set the desired operating pressure. The regulated operating pressure gauge will show the current output pressure.
  3. The compressor will automatically restart when the tank pressure drops below a preset minimum, maintaining consistent air supply.

5.3 Anwendungen

The Einhell TE-AC 135/24 Silent Plus compressor is suitable for a wide range of tasks:

Compressor compatibility with various air tools

Image: Diagram showing compatibility with air guns, tire inflators, spray guns, impact wrenches, and staplers/nailers.

Man using pneumatic stapler for upholstery

Image: Man using a pneumatic stapler on furniture.

Man painting with a spray gun

Image: Man painting a surface with a spray gun.

Man inflating a tire with compressor

Image: Man inflating a car tire using the compressor.

Man using an air gun for cleaning

Image: Man using an air gun to clean a surface.

6. Wartung

Regular maintenance ensures the longevity and efficient operation of your compressor.

6.1 Kondenswasserableitung

Condensation accumulates in the air tank during operation. It is crucial to drain this regularly to prevent corrosion and maintain air quality.

  1. Stellen Sie sicher, dass der Kompressor ausgeschaltet und vom Stromnetz getrennt ist.
  2. Stellen Sie einen geeigneten Behälter unter das Ablassventil am Boden des Tanks.
  3. Slowly open the drain valve to release the condensed water.
  4. Close the drain valve securely once all water has been drained.
  5. Perform this procedure after each use or at least weekly, depending on usage frequency and humidity.
Compressor drain valve

Bild: Nahaufnahme view of the drain valve at the bottom of the compressor tank.

6.2 Oil-Free Motor

The TE-AC 135/24 Silent Plus features an oil-free motor, which means no oil changes or lubrication are required for the pump. This significantly reduces maintenance efforts.

6.3 Allgemeine Reinigung

7. Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt, die bei Ihrem Kompressor auftreten können.

ProblemMögliche UrsacheLösung
Kompressor startet nicht.
  • Keine Stromversorgung.
  • Netzschalter ist AUS.
  • Thermischer Überlastschutz aktiviert.
  • Überprüfen Sie Netzstecker und Steckdose.
  • Schalten Sie den Netzschalter ein.
  • Allow compressor to cool down, then restart.
Der Kompressor läuft kontinuierlich oder häufig.
  • Air leak in system or connections.
  • Ablassventil geöffnet.
  • Heavy air consumption by tool.
  • Überprüfen Sie alle Schläuche und Verbindungen auf Dichtheit.
  • Stellen Sie sicher, dass das Ablassventil vollständig geschlossen ist.
  • Use a tool with lower air consumption or allow compressor to catch up.
Low output pressure.
  • Pressure reducer set too low.
  • Luftleck.
  • Clogged air filter (if applicable, though this model is oil-free).
  • Adjust pressure reducer to desired setting.
  • Check for and seal air leaks.
  • Ensure air intake is clear.
Übermäßige Geräusche oder Vibrationen.
  • Lose Komponenten.
  • Instabile Oberfläche.
  • Überprüfen Sie alle losen Schrauben und Beschläge und ziehen Sie sie fest.
  • Stellen Sie sicher, dass der Kompressor auf einer stabilen, ebenen Fläche steht.

Sollte das Problem nach Anwendung dieser Lösungsansätze weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

8. Spezifikationen

BesonderheitWert
Modellnummer4020610
MarkeEinhell
Leistung750 Watt
Bandtage220 Volt
Maximaler Druck8 Riegel
Tankinhalt24 Liter
Luftstromkapazität135 Liter pro Minute
Noise Level (LpA)57 dB
Noise Level (LwA)78 dB
Abmessungen (L x B x H)35.8 x 36.2 x 70.6 cm
Gewicht22.15 Kilogramm
Besondere MerkmaleOil-free, Maintenance-free
StromquelleStromkabel

9. Garantie und Support

Einhell is committed to quality and provides support for its products.

9.1 Tank Warranty

The air tank of your Einhell TE-AC 135/24 Silent Plus compressor is guaranteed for 10 Jahre KorrosionsschutzBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

9.2 Kundendienst

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webDie Kontaktdaten für Ihre Region finden Sie auf der Website oder in Ihren Kaufunterlagen.

You can also visit the official Einhell store for more information: Einhell Store

Zugehörige Dokumente - TE-AC 135/24 Silent Plus

Vorview Einhell TE-AC 135/24 Silent Plus Kompressor Bedienungsanleitung
Umfassende Bedienungsanleitung für den Einhell TE-AC 135/24 Silent Plus Kompressor. Enthält Informationen zu Sicherheit, Motage, Inbetriebnahme, technische Daten, Wartung und Fehlerbehebung.
Vorview Einhell TC-AC 400/50/8 Compressor Operating Instructions
Comprehensive operating instructions for the Einhell TC-AC 400/50/8 compressor, covering safety, usage, maintenance, and troubleshooting.
Vorview Einhell TE-VC 18 Li Akku-Handstaubsauger - Originalbetriebsanleitung
Umfassende Betriebsanleitung für den Einhell TE-VC 18 Li Akku-Handstaubsauger, inklusive Sicherheitshinweisen, technische Daten, MotagE-, Bedienungs- und Wartungsanleitungen sowie Garantieinformationen. Teil des Power X-Change Systems.
Vorview Einhell TE-FS 18 Li Akku-Besen Bedienungsanleitung
Diese Bedienungsanleitung für den Einhell TE-FS 18 Li Akku-Besen enthält wichtige Informationen zur sicheren Montagetage, Bedienung, Wartung und Entsorgung des Geräts. Erfahren Sie, wie Sie Ihren Akku-Kehrer optimal nutzen.
Vorview Einhell TH-AC 200/24 ​​OF Kompressor Bedienungsanleitung
Die offizielle Bedienungsanleitung für den Einhell TH-AC 200/24 ​​OF Kompressor. Enthält Sicherheitshinweise, technische Daten, Motageanleitungen und Wartungsinformationen.
Vorview Einhell TE-SC 920 L Steinschneidemaschine – Bedienungsanleitung
Ausführliche Bedienungsanleitung und Sicherheitsrichtlinien für die Steinschneidemaschine Einhell TE-SC 920 L, einschließlich Einrichtung, Bedienung, Wartung und Sicherheitsvorkehrungen.