Produkt überview

Image: The Progress Lighting Crofton 3-Light Chandelier, featuring a rustic pewter finish, brushed nickel accents, and three seeded glass shades housing exposed bulbs. The fixture is suspended by a chain.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Crofton 3-Light Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Sicherheitshinweise
WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr am Sicherungskasten oder Leitungsschutzschalter unterbrechen. Bei Unsicherheiten bezüglich der elektrischen Verkabelung einen qualifizierten Elektriker hinzuziehen.
- Stellen Sie sicher, dass alle elektrischen Anschlüsse den örtlichen Vorschriften und Verordnungen sowie dem National Electric Code (NEC) entsprechen.
- Diese Leuchte darf nicht in Feuchträumen installiert werden. Geeignet für trockene oder feuchte Umgebungen.amp nur Standorte.
- Verwenden Sie nur den angegebenen Lampentyp und die angegebene Wattzahl.tage. Exceeding maximum wattage kann zu Überhitzung führen.
- Gehen Sie vorsichtig mit Glaskomponenten um, um ein Zerbrechen zu vermeiden.
- Halten Sie brennbare Materialien von der Leuchte fern, solange diese in Betrieb ist.
Packungsinhalt
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Chandelier Frame Assembly (Rustic Pewter/Brushed Nickel)
- Seeded Glass Shades (3)
- Montagezubehör-Set (beinhaltet Montageband, Schrauben, Drahtverbinder)
- Canopy and Collar Ring
- Kettenmontage
- Light Bulbs (3, if included with your specific package)
Setup und Installation
Professional installation is recommended for optimal safety and performance. Follow these general steps for installation:
- Strom ausschalten: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the power completely before proceeding.
- Montage vorbereiten: Secure the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is firmly attached.
- Kettenlänge anpassen: Determine the desired hanging height for your chandelier. Open a chain link to remove excess chain, if necessary. Thread the fixture wires through the chain and canopy.
- Verkabelung anschließen: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts. Connect the bare copper ground wire from the fixture to the house ground wire. Connect the white fixture wire to the white (neutral) house wire. Connect the black fixture wire to the black (hot) house wire. Ensure all connections are secure.
- Sicheres Vordach: Tuck the connected wires neatly into the outlet box. Raise the canopy to the ceiling and secure it to the mounting strap using the collar ring.
- Install Glass Shades and Bulbs: Carefully attach the seeded glass shades to the fixture. Insert the recommended light bulbs (not exceeding maximum wattage) into the sockets.
- Strom wiederherstellen: Sobald die Installation abgeschlossen und alle Komponenten sicher befestigt sind, schalten Sie die Stromversorgung am Sicherungsautomaten oder Sicherungskasten wieder ein.
Bedienungsanleitung
This chandelier is designed for easy operation.
- Wandschalter: The primary method of operation is via a standard wall switch connected to the fixture's power supply. Flip the switch to turn the chandelier on or off.
- Fernbedienung: This fixture supports remote control operation. If a remote control unit was included or purchased separately, refer to its specific instructions for pairing and functionality. Typically, the remote allows for on/off control and potentially dimming functions, depending on the remote and bulb compatibility.
Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und das Aussehen Ihres Kronleuchters.
- Reinigung: To clean the fixture, turn off the power and allow it to cool. Wipe the metal surfaces with a soft, dry cloth. For glass shades, use a mild glass cleaner on a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Lampenwechsel: Turn off the power and allow bulbs to cool completely before replacing. Unscrew the old bulb and screw in a new bulb of the same type and wattage. Refer to the specifications section for recommended bulb types.
Fehlerbehebung
If your chandelier is not functioning correctly, consult the following common issues:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an | Kein Strom zum Gerät Wackelkontakt Defekte Glühbirne | Prüfen Sie den Leitungsschutzschalter/die Sicherung. Prüfen Sie, ob alle Drahtverbindungen fest sitzen (bei ausgeschalteter Stromversorgung). Glühbirne ersetzen |
| Lichter flackern | Lose Glühbirne Inkompatibler Dimmerschalter Lose Verkabelung | Glühlampe festziehen Ensure dimmer is compatible with bulbs Überprüfen Sie die Kabelverbindungen (bei ausgeschalteter Stromversorgung). |
| Fernbedienung funktioniert nicht | Batterien der Fernbedienung leer Fernbedienung nicht gekoppelt Obstruktion | Batterien ersetzen Refer to remote's pairing instructions Ensure clear line of sight to fixture's receiver |
If these steps do not resolve the issue, contact a qualified electrician or customer support.
Technische Daten
- Marke: Fortschritt Beleuchtung
- Modell: Crofton (B07XM9JMTR)
- Zieltyp: Brushed Nickel, Rustic Pewter
- Anzahl der Lichtquellen: 3
- Leuchtenform: Kronleuchter
- Energiequelle: Kabelgebundene Elektrik
- Kontrollmethode: Fernbedienung
- Produktabmessungen: 20 x 12 x 17 Zoll
- Artikelgewicht: 10.53 Pfund
- UPC: 785247218356
- Montageart: Deckenmontage
- Schattenfarbe: Clear (Seeded Glass)
Garantie und Support
For warranty information or technical support, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Kontaktinformationen: Refer to the Progress Lighting official webDie aktuellsten Kontaktdaten des Kundendienstes finden Sie auf der Website oder der Produktverpackung.





