1. Einleitung
This user manual provides comprehensive instructions for the APPS2Car 14'' Gooseneck Car Phone Holder, Model H5-S3L. This heavy-duty phone holder is designed for secure mounting in various vehicles, including trucks, and features a flexible long arm with an anti-shake stabilizer and a strong suction cup for optimal viewing und Stabilität.
Key features include a 14-inch aluminum arm for flexible adjustment, industrial-strength suction for secure attachment, and 360-degree rotation for versatile viewing angles. It is compatible with most smartphones between 4.7 and 6.7 inches.
2. Produktkomponenten
The APPS2Car 14'' Gooseneck Car Phone Holder consists of the following main components:
- Phone Holder Cradle: Securely grips your smartphone.
- 360° Rotate Ball Joint: Allows for full rotation and angle adjustment of the phone cradle.
- 14-inch Gooseneck Arm: Flexible aluminum arm for positioning the phone holder.
- Saugnapfbasis: Provides strong adhesion to surfaces like windshields or dashboards.
- Anti-Shake Stabilizer: An additional support base for enhanced stability.
- Schnellentriegelungsknopf: For easy insertion and removal of the phone.
Abbildung 2.1: Überview of the APPS2Car Gooseneck Car Phone Holder.
Figure 2.2: Key components of the phone holder, including the 360-degree rotating ball, anti-shake stabilizer, and quick release mechanism.
3. Einrichtung und Installation
Follow these steps to properly install your APPS2Car Gooseneck Car Phone Holder:
- Bereiten Sie die Oberfläche vor: Choose a clean, flat surface on your windshield or dashboard. Ensure the surface is free of dust, dirt, and oils. For textured dashboards, it is recommended to use a 3M dashboard mat (not included) for optimal adhesion.
- Attach the Phone Cradle: Connect the phone holder cradle to the 360° rotate ball joint on the gooseneck arm. Tighten the securing nut to ensure a firm connection.
- Apply Anti-Static Film (Optional but Recommended): The suction cup is equipped with an anti-static film. Peel off the protective film from the suction cup and apply it to your chosen mounting surface. This helps prevent adhesive residue.
- Mount the Suction Cup: Press the suction cup firmly against the prepared surface. Push down the lever on the suction cup base to create a vacuum seal and lock it in position.
- Position the Anti-Shake Stabilizer: If using, peel off the protective film from the anti-shake stabilizer and position it on the dashboard to provide additional support for the gooseneck arm.
- Adjust the Gooseneck Arm: Bend and shape the 14-inch gooseneck arm to achieve your desired viewing angle and position, ensuring it does not obstruct your sight while driving.
Abbildung 3.1: Visuelle Anleitung für den Installationsprozess.
4. Bedienungsanleitung
Using your APPS2Car phone holder is simple and designed for one-handed operation:
- Einlegen Ihres Telefons: Press the quick release button located on the back of the phone cradle. The side clamps will open. Place your smartphone into the cradle and gently squeeze the side clamps until they securely hold your device.
- Entfernen Ihres Telefons: Press the quick release button to release the side clamps, then carefully remove your phone.
- Anpassen Viewing-Winkel: The phone cradle features a 360-degree rotating ball joint, allowing you to rotate your phone to portrait or landscape mode. The flexible gooseneck arm can be bent and adjusted to position your phone at the optimal viewing height and distance, ensuring it does not block your view der Straße.
Figure 4.1: Proper placement to avoid obstructing sight.
Figure 4.2: The holder provides double stability, even on challenging road conditions.
5. Wartung
Um die Langlebigkeit und optimale Leistung Ihrer Handyhalterung zu gewährleisten, beachten Sie bitte folgende Wartungshinweise:
- Reinigung des Saugnapfs: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. Do not use harsh chemicals or abrasive materials, as this can damage the adhesive properties.
- Allgemeine Reinigung: Wipe the phone holder and arm with a soft, damp Mit einem Tuch Staub und Schmutz entfernen. Übermäßige Feuchtigkeit vermeiden.
- Lagerung: When not in use for extended periods, detach the holder from the mounting surface and store it in a cool, dry place away from direct sunlight.
Figure 5.1: Maintaining the suction cup for strong adhesion.
6. Fehlerbehebung
If you encounter issues with your APPS2Car phone holder, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Saugnapf hält nicht fest. | Surface is dirty, oily, or textured; suction cup is dirty or dry. | Clean the mounting surface thoroughly. Rinse the suction cup with warm water and let it air dry. For textured dashboards, use a 3M dashboard mat. Ensure the lever is fully engaged. |
| Das Telefon passt nicht in die Halterung. | Phone size is outside the compatible range (4.7-6.7 inches); phone case is too thick. | Verify your phone's dimensions. The holder is not compatible with otterbox cases, pop socket cases, and wallet cases thicker than 0.6 inches. Remove overly thick cases if necessary. |
| Holder shakes or vibrates excessively. | Gooseneck arm is not properly positioned; anti-shake stabilizer is not used or improperly placed. | Adjust the gooseneck arm to a more stable position. Ensure the anti-shake stabilizer is firmly attached and providing support. |
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Technische Daten | 6 x 3 x 2 Zoll |
| Artikelgewicht | 8.4 Unzen |
| Artikelmodellnummer | H5-S3L |
| Besondere Merkmale | 14 inch Long Arm Car Phone Holder Mount, Flexible Long Arm Truck Phone Holder, Industrial-Strength Suction Cup, Hands-free & One hand operation, Support Thick Cases |
| Kompatible Geräte | Smartphones |
| Kompatible Telefonmodelle | iPhone 16 Pro Max/16 Pro/16 Plus/16/15 Pro Max/15 Pro/15 Plus/15/14 Plus/14 Pro/14 Pro Max/13/12 Pro Max Mini iPhone X iPhone XR iPhone 8 iPhone 8 Plus iPhone 7 iPhone 6 Plus, Samsung Galaxy S23/S22/S22+/S21/S21+/S21 Ultra/S20 Ultra/S20/S10 Plus/S10/S9/S8/S7/S6, Note 20/Note 10/Note 9/Note 8, Nexus 5/5X/6P, LG V35/V30/V20, Moto G/Z/X, OnePlus, and other Android smartphones (between 4.7 - 6.7 inches). Not compatible with otterbox cases, pop socket cases, and wallet cases thicker than 0.6-inch. |
| Montagetyp | Windshield/Dashboard/Dash (suitable for Truck, SUV, Semi-truck) |
| Farbe | Spiegel Schwarz |
| Hersteller | APPS2Car |
| Ursprungsland | China |
| Datum der ersten Verfügbarkeit | 19. September 2019 |
8. Garantie und Support
Specific warranty information for the APPS2Car 14'' Gooseneck Car Phone Holder is not provided in the product details. For warranty claims, technical support, or further assistance, please contact APPS2Car customer service directly through their official webWebsite oder den Händler, bei dem das Produkt gekauft wurde.
Sie können auch die folgende besuchen: APPS2Car Store on Amazon für weitere Informationen.
