microSHIFT BS-SR-M11-R Right Bar End Shifter Instruction Manual

1. Einleitung

This manual provides instructions for the installation, operation, and maintenance of your microSHIFT BS-SR-M11-R Right Bar End Shifter. This shifter is designed for 11-speed mountain bike systems and is compatible with SRAM X-Actuation. It offers reliable and precise gear transitions for various cycling disciplines, including mountain biking, gravel riding, and touring.

Figure 1: microSHIFT BS-SR-M11-R Right Bar End Shifter. This image shows the shifter unit, typically mounted at the end of a handlebar.

2. Sicherheitshinweise

Always prioritize safety when installing or maintaining bicycle components. Improper installation or adjustment can lead to serious injury or damage to your bicycle.

• Ensure all components are securely fastened according to torque specifications (if applicable).
• If you are unsure about any installation step, consult a professional bicycle mechanic.
• Tragen Sie bei der Installation und Wartung geeignete Schutzausrüstung, wie z. B. Handschuhe und Augenschutz.
• Regularly inspect your shifter and cables for wear or damage. Replace worn parts immediately.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Artikel im Paket vorhanden sind:

• microSHIFT BS-SR-M11-R Right Bar End Shifter (1 unit)
• Stainless Slick Shift Cables (1 set)

4. Einrichtung und Installation

The microSHIFT BS-SR-M11-R shifter is designed for straightforward installation on handlebars with an internal diameter of 19-21mm. It is compatible with 11-speed MTB 1x11 systems and SRAM X-Actuation components.

4.1 Handlebar Compatibility

This bar end shifter utilizes an expander plug for secure mounting. Ensure your handlebar's internal diameter falls within the 19-21mm range for proper fitment.

4.2 Shifter Mounting

1. Carefully insert the shifter's expander plug into the end of the right handlebar.
2. Tighten the expander bolt (if applicable) to secure the shifter firmly in place. Do not overtighten.
3. Ensure the shifter body is oriented correctly for comfortable and ergonomic access.

4.3 Kabelführung und -anschluss

1. Route the included stainless slick shift cable through the shifter body and your bicycle's cable housing.
2. Connect the cable to your SRAM X-Actuation compatible 11-speed rear derailleur.
3. Adjust cable tension at the derailleur and/or inline adjusters to achieve proper shifting.

Note: For optimal performance, ensure cable housing is cut cleanly and ferrules are properly seated.

5. Bedienungsanleitung

The microSHIFT BS-SR-M11-R shifter provides precise control over your 11-speed drivetrain. It features both indexed and friction shifting modes.

5.1 Indexed Shifting Mode

In indexed mode, the shifter provides distinct clicks for each gear change, ensuring accurate and consistent shifts across your 11-speed cassette. This mode is ideal for most riding conditions where precise gear selection is desired.

• To shift to a higher gear (smaller cog), push the lever forward.
• To shift to a lower gear (larger cog), pull the lever backward.
• Each movement corresponds to one gear change.

5.2 Friction Shifting Mode

The shifter can be converted to friction mode, which allows for continuous, non-indexed adjustment of the derailleur. This mode offers flexibility and can be particularly useful in challenging mechanical conditions or with slightly misaligned drivetrains. It requires more rider input to find the correct gear position.

• To engage friction mode, refer to the specific instructions provided with your shifter or consult a professional mechanic. This typically involves a small adjustment on the shifter body.
• In friction mode, move the lever gradually until the chain is centered on the desired cog without rubbing.

5.3 Adjustable Shifting Tension

The shifter features adjustable tension, allowing you to customize the feel of each shift. A small screw or dial on the shifter body typically controls this. Adjust it to your preference for a lighter or firmer shift action.

6. Wartung

Regular maintenance ensures the longevity and optimal performance of your microSHIFT bar end shifter. This shifter is designed for low maintenance, but periodic checks are recommended.

• Reinigung: Keep the shifter body and surrounding areas clean from dirt and debris. Use a damp Bei Bedarf ein Tuch und milde Seife verwenden.
• Kabelinspektion: Periodically inspect the shift cables and housing for fraying, kinks, or corrosion. Replace cables and housing as needed to maintain smooth shifting.
• Schmierung: Apply a small amount of bicycle-specific lubricant to the pivot points of the shifter and the exposed sections of the shift cable where it enters the housing.
• Spannungsprüfung: Ensure the shifter's mounting bolt remains securely tightened.

7. Fehlerbehebung

Sollten Sie Probleme mit Ihrem Schalthebel haben, konsultieren Sie die folgenden gängigen Schritte zur Fehlerbehebung:

• Difficulty Shifting / Ghost Shifting:
  • Check cable tension. Too loose or too tight can affect shifting accuracy. Adjust using inline adjusters or the derailleur's barrel adjuster.
  • Inspect shift cables and housing for damage or excessive friction. Replace if necessary.
  • Ensure the rear derailleur is properly aligned and not bent.
• Shifter Feels Loose:
  • Check the expander bolt inside the handlebar. Tighten it securely, but do not overtighten.
  • Verify that the handlebar's internal diameter is within the specified 19-21mm range.
• Indexing Issues (e.g., with Shimano Derailleurs):
  • This shifter is specifically designed for SRAM X-Actuation 11-speed mountain systems. While it may operate in friction mode with other brands, indexed shifting compatibility with non-SRAM 11-speed mountain derailleurs (e.g., Shimano Ultegra 11-speed road mech) is not guaranteed and may not function correctly.
  • If using with a non-SRAM system, consider utilizing the friction shifting mode for greater compatibility.

Sollten die Probleme nach Durchführung dieser Schritte weiterhin bestehen, empfiehlt es sich, einen professionellen Fahrradmechaniker zu konsultieren.

8. Spezifikationen

9. Garantieinformationen

This microSHIFT product is covered by a Eingeschränkte Garantie. For detailed information regarding warranty terms, conditions, and duration, please refer to the official microSHIFT webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundendienst. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

10. Kundendienst

If you have any questions, require technical assistance, or need to report an issue that cannot be resolved using the troubleshooting guide, please contact microSHIFT customer support.

For the most up-to-date contact information, please visit the official microSHIFT webWebsite:

www.microshift.com