Einführung
The LARQ Bottle PureVis is an innovative self-cleaning and insulated water bottle designed to provide clean drinking water on the go. It utilizes non-toxic, mercury-free UV-C LED technology to neutralize bacteria and keep your water and bottle fresh. The double-wall vacuum insulation maintains beverage temperature, keeping water cold for up to 24 hours and hot for up to 12 hours.
Eine vollständige view of the LARQ Bottle PureVis in Himalayan Pink, showcasing its sleek design and two-tone finish.
Komponenten
Your LARQ Bottle PureVis package includes the following components:
- LARQ Bottle PureVis (17 oz / 500 ml)
- PureVis Cap with integrated UV-C LED
- MicroUSB-Ladekabel
- Kurzanleitung
The LARQ Bottle PureVis cap is shown detached from the bottle, revealing the integrated UV-C LED purification system within the cap and the stainless steel opening of the bottle.
Aufstellen
Erstladung
Before first use, fully charge your LARQ Bottle PureVis cap. Connect the provided MicroUSB charging cable to the port on the cap and plug the other end into a USB power source. The light ring on the cap will indicate charging status. A full charge typically lasts up to one month with regular use.
Erste Verwendung
After charging, fill your LARQ Bottle with water. Ensure the water level is below the neck of the bottle to prevent overflow. Securely screw the PureVis cap onto the bottle. The bottle is now ready for use.
The LARQ Bottle PureVis is depicted with its cap's light ring illuminated, indicating an active purification cycle or charging status.
Bedienungsanleitung
PureVis Self-Cleaning Mode
To activate the PureVis self-cleaning mode, press the button on the top of the cap once. The UV-C LED will illuminate, and the purification cycle will begin, lasting approximately 60 seconds. This process neutralizes bacteria and keeps your water fresh.
Automatische Selbstreinigung
For continuous freshness, the LARQ Bottle PureVis automatically activates a self-cleaning cycle every two hours. This ensures your bottle remains clean and odor-free throughout the day.
Temperaturerhaltung
The double-wall vacuum insulated design of the LARQ Bottle PureVis allows it to keep beverages cold for up to 24 hours and hot for up to 12 hours. For best results with cold beverages, add ice cubes. For hot beverages, pre-heat the bottle with hot water before filling.
An annotated image of the LARQ Bottle PureVis, pointing out its key features: zero to clean in 60 seconds, self-cleaning, BPA & plastic-free, food-grade 18/8 stainless steel, and 24 hours cold / 12 hours hot insulation.
Pflege und Wartung
Reinigungshinweise
The LARQ Bottle PureVis is designed for easy maintenance. The bottle itself should be Nur Handwäsche. Do not place the bottle or cap in a dishwasher. The PureVis cap should be wiped clean with a damp cloth. Do not submerge the cap in water.
Laden
Recharge the cap using the provided MicroUSB cable when the battery indicator shows low power. A full charge typically provides power for up to a month of self-cleaning cycles.
A clear image of the LARQ Bottle PureVis in Himalayan Pink, indicating its 17 ounce (500 milliliter) capacity.
Fehlerbehebung
Cap Light Ring is Orange
If the light ring on your PureVis cap illuminates orange, it indicates that the ambient light sensor detects the cap is activated outside of the bottle. Ensure the cap is securely screwed onto the bottle before initiating a cleaning cycle. If the issue persists, ensure there is no moisture or debris obstructing the sensor inside the cap.
Bottle Not Cleaning / Cap Not Activating
- Ensure the cap is fully charged. Connect it to the MicroUSB cable and allow it to charge until the light indicator turns solid green.
- Verify the cap is screwed on tightly to the bottle. A loose connection may prevent activation.
- Check for any physical damage to the cap or bottle that might interfere with the connection or sensor.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | LARQ |
| Modellname | LARQ Bottle PureVis |
| Modellnummer | 251124 |
| Kapazität | 17 Flüssigunzen (500 Milliliter) |
| Material | Stainless Steel (18/8) |
| Farbe | Himalayan Pink |
| Technische Daten | 3.1 Zoll B x 11.1 Zoll H |
| Artikelgewicht | 13.5 Unzen (382 Gramm) |
| Besondere Merkmale | Self-cleaning (UV-C LED), Double Wall Vacuum Insulation (Cold 24 hours, Hot 12 Hours), Leak Proof, Rechargeable Battery |
| Akku-Typ | 1 Lithium-Polymer-Akku (im Lieferumfang enthalten) |
| Materialtyp Frei | Bisphenol A (BPA) Free |
| Hinweise zur Produktpflege | Handwäsche nur |
Garantie und Support
Garantieinformationen
The LARQ Bottle PureVis comes with a 1 Jahr eingeschränkte Garantie. Please refer to the official LARQ webDie detaillierten Garantiebedingungen finden Sie auf unserer Website oder kontaktieren Sie unseren Kundendienst.
Zusätzlicher Support
For further assistance, detailed instructions, or frequently asked questions, please refer to the official user manual PDF or visit the LARQ support page.
Offizielles Benutzerhandbuch (PDF): PDF herunterladen
