Oxford Baby Emerson Full Bed Conversion Kit Instruction Manual

1. Produktüberschreitungview

The Oxford Baby Emerson Full Bed Conversion Kit is designed to transform your existing Oxford Baby Emerson 4-in-1 Convertible Crib into a full-size bed. This kit includes the necessary side rails and slat support pieces to complete the conversion, providing a durable and coordinated sleeping solution that matches your Emerson crib's headboard and footboard.

This image displays the complete Oxford Baby Emerson Collection, including the 4-in-1 Convertible Crib from which the full bed conversion is made, alongside a matching changing station and dresser, all in Snow White finish.

2. Sicherheitshinweise

Wichtige Sicherheitshinweise:

• Always ensure all hardware is securely tightened during and after assembly.
• Regularly check for loose parts, screws, or structural damage. Do not use the bed if any components are damaged or missing.
• Bewahren Sie Kleinteile und Hardware während der Montage außerhalb der Reichweite von Kindern auf, um Erstickungsgefahren zu vermeiden.
• This product is intended for use with the Oxford Baby Emerson 4-in-1 Convertible Crib only. Using it with other crib models may result in instability or damage.
• Warnung zu Proposition 65: This product may contain chemicals known to the State of California to cause cancer or birth defects or other reproductive harm.

The GREENGUARD GOLD certification indicates that this product has been tested for over 10,000 chemical emissions and meets stringent standards for low chemical emissions, contributing to healthier indoor air quality.

3. Packungsinhalt

Bitte prüfen Sie vor Beginn der Montage, ob alle Komponenten vorhanden sind. Sollten Teile fehlen oder beschädigt sein, kontaktieren Sie bitte umgehend unseren Kundendienst.

• Two (2) Full Bed Side Rails (matching your crib's finish)
• Three (3) Slat Support Pieces
• One (1) Hardware Pack (includes all necessary screws and bolts)

4. Aufbau- und Montageanleitung

Bevor Sie beginnen: Ensure you have all components and tools. Refer to your original Oxford Baby Emerson 4-in-1 Convertible Crib manual for instructions on disassembling the crib into its headboard and footboard components. This kit assumes the crib has already been converted to a headboard and footboard configuration.

1. Bereiten Sie die Krippe vor: Disassemble your Oxford Baby Emerson 4-in-1 Convertible Crib, retaining the headboard and footboard sections. Remove any existing crib side rails or mattress support.
2. Seitliche Schienen anbringen: Align the provided full bed side rails with the attachment points on the headboard and footboard. Secure them using the included hardware from the hardware pack. Ensure all connections are tight and stable.
3. Montage der Lattenhalterungen: Place the three slat support pieces across the width of the bed, resting them on the ledges of the side rails. These slats provide foundational support for the mattress.
4. Matratzenplatzierung: Position a standard full-size mattress onto the installed slat supports. Ensure the mattress fits snugly within the frame.
5. Endkontrolle: Verify that all connections are secure and the bed frame is stable before use. Gently shake the bed to confirm stability.

This image illustrates the Oxford Baby Emerson 4-in-1 Convertible Crib after conversion into a full-size bed using the conversion kit. It features the original crib's headboard and footboard with the added side rails and mattress support slats.

5. Bedienungsanleitung

Once assembled, the Emerson Full Bed provides a stable sleeping surface. Ensure the mattress fits snugly within the frame to prevent gaps. Regularly inspect the bed for any signs of wear or loose hardware to maintain safety and structural integrity.

6. Wartung

Produktpflegehinweise:

• Wischen Sie die Oberfläche mit adamp Tuch.
• Vermeiden Sie die Verwendung von Scheuermitteln, aggressiven Chemikalien oder starken Reinigungsmitteln, da diese die Oberfläche beschädigen können.
• Periodically check and tighten all hardware (screws, bolts) to ensure the bed remains stable and secure.

7. Fehlerbehebung

Häufige Probleme und Lösungen:

• Das Bett fühlt sich instabil an: Re-check all connections and ensure all screws and bolts are securely tightened. Verify that the side rails are properly seated in the headboard and footboard.
• Fehlende oder beschädigte Teile: If any parts are missing or damaged upon arrival, do not proceed with assembly. Contact Oxford Baby customer support for replacements.
• Kompatibilitätsprobleme: This conversion kit is specifically designed for the Oxford Baby Emerson 4-in-1 Convertible Crib. Ensure your crib model is compatible before attempting assembly. Check your crib's headboard and footboard for the correct attachment points (e.g., screw holes vs. hook slots).

8. Spezifikationen

9. Garantie und Support

Garantie: This product comes with a 1-year limited manufacturer defect warranty.

Kundendienst: For assistance, missing parts, warranty claims, or further inquiries, please visit the official Oxford Baby store or contact their customer service department.

Official Oxford Baby Store: Visit Oxford Baby Store