1. Produktüberschreitungview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Abbildung 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Sicherheitshinweise
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Allgemeine Sicherheit
- Tragen Sie immer geeignete persönliche Schutzausrüstung (PSA) wie Schutzbrille und Handschuhe.
- Stellen Sie sicher, dass die Pumpe auf einer stabilen, ebenen Fläche steht, um ein Umkippen zu verhindern.
- Halten Sie Kinder und Unbefugte vom Arbeitsbereich fern.
- Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Elektrische Sicherheit
- Stellen Sie sicher, dass die Stromversorgungslautstärketage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Packungsinhalt
Bitte überprüfen Sie beim Auspacken, ob alle unten aufgeführten Artikel vorhanden und unbeschädigt sind:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x Druckschalter
- 1 x Stainless Steel Hose
- 1 x Manometer
- 1 x Three-way Brass Fitting
- Benutzerhandbuch (dieses Dokument)
4. Technische Daten
| Spezifikation | Wert |
|---|---|
| Modellnummer | TWP47506 |
| Typ | Self-priming Automatic Jet Pump |
| Nennleistung | 750W (1.0 PS) |
| Bandtage | 220 bis 240 V |
| Frequenz | 50 Hz |
| Maximaler Kopf | 45 Meter |
| Maximaler Durchfluss | 60 Liter/Minute |
| Max. Saugkraft | 9 Meter |
| Rohrdurchmesser | 1 x 1 Zoll |
| Motortyp | Copper Wire Induction Motor (Brushless) |
| Laufradmaterial | Edelstahl |
| Pumpe Casing Material | Gusseisen |
| Kabellänge | 0.3 Meter |
| Tank Capacity (Cylindrical) | 24 Liter |
| Produktabmessungen (L x B x H) | 30 x 19 x 22 cm |
| Artikelgewicht | 1.5 kg |
| Farbe | Silber |
5. Einrichtung und Installation
5.1 Platzierung
- Position the pump on a firm, level, and dry surface.
- Sorgen Sie für ausreichende Belüftung rund um die Pumpe, um eine Überhitzung zu vermeiden.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Anschlussrohre
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Saugrohr: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Abflussrohr: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Vorbereiten der Pumpe
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Stellen Sie sicher, dass das Saugrohr vollständig in die Wasserquelle eingetaucht ist.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Elektrischer Anschluss
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Bedienung
6.1 Starten der Pumpe
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Automatikbetrieb
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Stoppen der Pumpe
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Wartung
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Regelmäßige Kontrollen
- Überprüfen Sie das Netzkabel und den Stecker auf Anzeichen von Beschädigungen.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Achten Sie während des Betriebs auf ungewöhnliche Geräusche, die auf ein Problem hinweisen könnten.
7.2 Reinigung
Wischen Sie die Außenseite der Pumpe mit Ad abamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Winterfestmachung (für kalte Klimazonen)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Trennen Sie die Stromversorgung.
- Lassen Sie das gesamte Wasser aus der Pumpe ab.asing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Lagern Sie die Pumpe an einem trockenen, frostfreien Ort.
8. Fehlerbehebung
Bevor Sie sich an den Kundendienst wenden, konsultieren Sie bitte die folgende Tabelle mit häufig auftretenden Problemen und Lösungen.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Pumpe startet nicht | Keine Stromversorgung Defektes Netzkabel/Stecker Motorüberlastschutz ausgelöst |
Stromanschluss und Steckdose prüfen Überprüfen und bei Beschädigung ersetzen Allow motor to cool, then restart. Check for blockages. |
| Die Pumpe läuft, aber es wird kein Wasser gefördert. | Pumpe nicht vorgefüllt Luftleck in der Saugleitung Saughöhe zu hoch Fußventil verstopft oder klemmt Water source empty |
Re-prime the pump (Section 5.3) Prüfen Sie alle Sauganschlüsse auf Undichtigkeiten und ziehen Sie sie fest. Pumpe näher an die Wasserquelle verlegen Fußventil reinigen oder austauschen Ensure adequate water in source |
| Niedriger Durchfluss oder Druck | Partial blockage in pipes/impeller Luftleck in der Saugleitung Abgenutztes Laufrad Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Wenden Sie sich an qualifiziertes Servicepersonal. Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Die Pumpe schaltet sich häufig ein und aus. | Leak in discharge system Pressure tank pre-charge incorrect Fehlerhafter Druckschalter |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Garantie und Support
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.
