1. Einleitung
Vielen Dank für Ihren Einkauf.asing the JJRC Q39 HIGHLANDER 1:12 4WD RC Desert Truck. This high-performance remote control vehicle is designed for off-road adventures, offering excellent speed, control, and durability. Equipped with a powerful motor and high-torque servo, it is capable of climbing slopes, accelerating rapidly, drifting, and braking effectively on various terrains. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance.

The JJRC Q39 HIGHLANDER 1:12 4WD RC Desert Truck, showcasing its dynamic capabilities on a dusty track.
2. Sicherheitshinweise
- Fahren Sie den RC-Truck immer auf offenen Flächen, fernab von Menschen, Haustieren und Hindernissen.
- Nicht in der Nähe von Straßen, Gewässern oder Hochgeschwindigkeitsanlagen betreiben.tage Stromleitungen.
- Halten Sie Hände, Haare und lose Kleidung von beweglichen Teilen fern.
- Für Benutzer unter 14 Jahren wird die Aufsicht durch Erwachsene empfohlen.
- Ensure the battery is fully charged before use and disconnect it after operation.
- Do not attempt to modify the vehicle or its components, as this may void the warranty and cause damage.
- Store the vehicle and remote control in a cool, dry place when not in use.
3. Packungsinhalt
Das Paket enthält üblicherweise folgende Artikel:
- JJRC Q39 HIGHLANDER RC Desert Truck
- 2.4-GHz-Fernbedienungssender
- 7.4V 1500mAh LiPo-Akku
- USB-Ladekabel
- Kreuzschlüssel
- Bedienungsanleitung
4. Einrichtung
4.1 Laden der Batterie
- Connect the 7.4V 1500mAh LiPo battery to the USB charging cable.
- Plug the USB charging cable into a suitable USB power adapter (e.g., computer USB port, phone charger).
- The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.
- Lassen Sie den Akku während des Ladevorgangs nicht unbeaufsichtigt.

The 7.4V 1500mAh LiPo battery, providing approximately 15 minutes of run time with a 2.5-hour charging duration.
4.2 Truck Battery Installation
- Suchen Sie das Batteriefach am RC-Truck.
- Öffnen Sie die Abdeckung des Batteriefachs.
- Carefully insert the fully charged 7.4V 1500mAh LiPo battery into the compartment.
- Verbinden Sie den Batteriestecker mit dem Stromanschluss des Lkw.
- Schließen Sie den Batteriefachdeckel fest.
4.3 Installation der Fernbedienungsbatterie
- Suchen Sie das Batteriefach auf der Rückseite der 2.4-GHz-Fernbedienung.
- Öffnen Sie die Abdeckung des Batteriefachs.
- Insert three (3) 1.5V AA batteries (not included), ensuring correct polarity (+/-).
- Schließen Sie den Batteriefachdeckel fest.

The 2.4GHz remote control, showing the indicator light, servo fine-tuning, power light, turn left/right wheel, forward/backward trigger, and battery compartment for three AA batteries.
4.4 Pairing the Remote Control and Truck
- Turn on the RC truck using the power switch. The truck's indicator light will flash.
- Schalten Sie die Fernbedienung ein. Die Kontrollleuchte der Fernbedienung blinkt.
- Wait a few seconds for the remote control and truck to automatically pair. Once paired, both indicator lights will become solid.
- Falls die Kopplung fehlschlägt, schalten Sie beide Geräte aus und wiederholen Sie die Schritte.
5. Operating the RC Truck
5.1 Fernbedienungsfunktionen
- Forward/Backward Trigger: Pull the trigger to move forward, push it to move backward.
- Turn Left/Right Wheel: Rotate the wheel left to turn the truck left, rotate right to turn right.
- Servo Fine-tuning: Use this dial to adjust the steering trim if the truck does not drive straight when the steering wheel is centered.
- Power-Licht: Indicates the remote control's power status.
- Kontrollleuchte: Shows pairing status and signal strength.
5.2 Fahrtipps
- Beginnen Sie mit niedrigen Geschwindigkeiten, um sich an die Steuerung zu gewöhnen.
- The truck is designed for off-road use and performs well on dirt, gravel, and uneven surfaces.
- Um Schäden an elektronischen Bauteilen zu vermeiden, vermeiden Sie Fahrten in tiefem Wasser oder bei extrem schlammigen Bedingungen.
- Practice turning and braking to master drifting and precise control. The high-torque servo provides excellent responsiveness.

The JJRC Q39 HIGHLANDER RC Desert Truck demonstrating its maximum speed capability of 40 KM/H on various surfaces.
6. Wartung
6.1 Reinigung
- Reinigen Sie den LKW nach jedem Einsatz, insbesondere bei staubigen oder schmutzigen Bedingungen, mit einer weichen Bürste oder Druckluft, um Ablagerungen zu entfernen.
- Wischen Sie den Körper mit Anzeige abamp Tuch. Verwenden Sie keine aggressiven Chemikalien oder Lösungsmittel.
- Ensure all moving parts are free from obstructions.
6.2 Batteriepflege
- Die Batterie des Lkw sollte immer abgeklemmt werden, wenn dieser nicht benutzt wird.
- Store LiPo batteries in a cool, dry place, away from direct sunlight and heat sources.
- Überladen oder entladen Sie den Akku nicht.
6.3 Komponentenüberschreitungview

Ein explodiert view of the JJRC Q39 HIGHLANDER's internal components, including the motor, differential, shock absorbers, electronic speed control, and servo.

The 390 Powerful High Speed Magnetic Motor, responsible for the truck's acceleration and climbing capabilities.

The 19G High Speed Servo, providing 10 N.m of torque for precise steering control and immediate feedback.
7. Fehlerbehebung
- LKW reagiert nicht: Ensure both the truck and remote control are powered on and properly paired. Check battery levels in both devices.
- Kurze Laufzeit: The battery may not be fully charged, or it may be nearing the end of its lifespan. Ensure proper charging procedures are followed.
- Poor steering control: Adjust the servo fine-tuning dial on the remote control. Check for any obstructions in the steering mechanism.
- Loss of range: Ensure there are no strong interference sources nearby. Check remote control battery level.
8. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellname | Q39 HIGHLANDER |
| Skala | 1:12 |
| Antriebssystem | 4WD (Allradantrieb) |
| Maximalgeschwindigkeit | Up to 35km/h (40km/h as per some images) |
| Motortyp | 390 Powerful High Speed Magnetic Motor |
| Servo | 19G High Speed Servo (10 N.m torque) |
| Batterie | 7.4 V 1500 mAh LiPo (Lithium-Polymer) |
| Ladezeit | Ca. 2.5 Stunden |
| Laufzeit | Ca. 15 Minuten |
| Fernbedienungsfrequenz | 2.4 GHz |
| Batterien für Fernbedienungen | 3 x 1.5 V AA-Batterien (nicht im Lieferumfang enthalten) |
| Material | Polyester (Body/Chassis components) |
| Farbe | Blau und Schwarz |
| Abmessungen (Versand) | 39.9 x 27.7 x 20 cm |
| Gewicht (Versand) | 2.08 kg |
9. Garantie und Support
For warranty information, technical support, or replacement parts, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase. Refer to the official JJRC website or product packaging for specific contact details.





