Behringer TD-3 Analog Bass Line Synthesizer Benutzerhandbuch

Einführung

This manual provides essential information for the setup, operation, and maintenance of your Behringer TD-3 Analog Bass Line Synthesizer. The TD-3 is an authentic reproduction of original circuitry, featuring a Voltage Controlled Oscillator (VCO), Voltage Controlled Filter (VCF), 16-step sequencer, and distortion effects. It is designed to deliver classic bass and groove sounds with true analog circuitry.

Sicherheitshinweise

Please read these instructions carefully before operating the device. Keep this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. Do not expose this appliance to rain or moisture. Do not use this apparatus near water. Clean only with a dry cloth. Refer all servicing to qualified service personnel.

Packungsinhalt

The Behringer TD-3-RD Analog Bass Line Synthesizer package includes:

• Behringer TD-3-RD Analog Bass Line Synthesizer
• Netzteil
• Bedienungsanleitung

Produkt überview

The TD-3 is an analog bass line synthesizer designed for bass and groove sounds. It features an authentic reproduction of original circuitry with matched transistors, a pure analog signal path based on legendary VCO, VCF, and VCA designs.

Abbildung 1: Vorderseite view of the Behringer TD-3-RD Analog Bass Line Synthesizer, showing controls for tune, cutoff, resonance, envelope, decay, accent, distortion, volume, and the 16-step sequencer interface.

Abbildung 2: Schräg view of the Behringer TD-3-RD Analog Bass Line Synthesizer, highlighting its compact design and various control knobs and buttons.

Hauptmerkmale:

• Sawtooth and square waveform VCO with transistor wave-shaping circuitry.
• 4-pole low-pass resonant filter with cut-off, resonance, envelope, decay and accent controls.
• 16-step sequencer for pattern creation.
• Built-in distortion effects.
• 16-voice Poly Chain capability.

Aufstellen

Stromanschluss:

Connect the provided power adapter to the DC input on the rear panel of the TD-3. Plug the adapter into a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting the power supply.

Audioausgang:

Connect the main audio output (1/4-inch TS jack) to your mixer, audio interface, or amplifier. For monitoring, headphones can be connected to the dedicated headphone jack.

MIDI-Konnektivität:

For external control or synchronization, connect MIDI cables to the MIDI IN and MIDI OUT ports. The TD-3 also supports USB MIDI for computer connectivity.

Betrieb

Grundlegende Bedienung:

• Einschalten: Schalten Sie den Netzschalter in die Position „EIN“.
• Lautstärkeregelung: Adjust the MASTER VOLUME knob to set the overall output level.
• Tonerzeugung: The TD-3 features a VCO (Voltage Controlled Oscillator) for generating the core sound. Use the WAVEFORM switch to select between Sawtooth and Square waves.
• Filtersteuerung: Der VCF (Voltage Controlled Filter) section allows you to shape the timbre. Adjust CUTOFF, RESONANCE, ENVELOPE, DECAY, and ACCENT knobs to modify the filter's characteristics.

Tongestaltung

VCO (Bdtage Gesteuerter Oszillator):

The VCO is the primary sound source. Select between a rich Sawtooth wave or a punchy Square wave using the WAVEFORM switch. The TUNE knob adjusts the overall pitch of the oscillator.

VCF (Bdtage Gesteuerter Filter):

The 4-pole low-pass resonant filter is crucial for shaping the TD-3's signature sound. Experiment with the following controls:

• ABGESCHNITTEN: Determines the frequency at which the filter starts to attenuate higher frequencies.
• RESONANZ: Boosts frequencies around the cutoff point, creating a more pronounced and sometimes

  Zugehörige Dokumente - TD-3

  	Behringer TD-3 Analog Bass Line Synthesizer – Kurzanleitung Starte deine musikalische Reise mit dem Behringer TD-3 Analog-Bassline-Synthesizer. Diese Kurzanleitung bietet dir alle wichtigen Informationen zu Einrichtung, Anschlüssen, Bedienelementen und Bedienung des TD-3 – einem leistungsstarken Instrument mit klassischer analoger Klangerzeugung, Sequenzer und Effekten.
  	Behringer TD-3 Schnellstartanleitung Dieser Leitfaden enthält wichtige Sicherheitshinweise und Informationen zur Einrichtung des Behringer TD-3 Analog Bass Line Synthesizers.
  	Behringer EDGE Analog Semi-Modular Percussion Synthesizer Quick Start Guide Comprehensive quick start guide for the Behringer EDGE Analog Semi-Modular Percussion Synthesizer, featuring 2 Oscillators, Multi-Mode Filter, Dual 8-Step Sequencer, and 16-Voice Poly Chain. Learn setup, controls, and initial sound creation.
  	Behringer TD-3-MO-SR/TD-3-MO-AM Analog-Basslinien-Synthesizer – Kurzanleitung Kurzanleitung und Bedienungsanleitung für den Behringer TD-3-MO-SR/TD-3-MO-AM "Modded Out" Analog Bass Line Synthesizer, mit Informationen zu Einrichtung, Bedienelementen, Pattern-Erstellung, Track-Sequenzierung und technischen Spezifikationen.
  	Behringer TD-3-MO „Modded Out“ Analog-Bassline-Synthesizer – Kurzanleitung Eine Kurzanleitung für den Behringer TD-3-MO "Modded Out" Analog Bass Line Synthesizer, die Einrichtung, Anschlüsse, Software- und Hardwarekonfiguration, Stimmung, Sync- und Clock-Einstellungen, Signalfluss und grundlegende Bedienung abdeckt.
  	Behringer CRAVE Schnellstartanleitung: Analoger, halbmodularer Synthesizer Mit dem Behringer CRAVE, einem leistungsstarken, analogen, semi-modularen Synthesizer mit 3340 VCO, klassischem Ladder-Filter, 32-Step-Sequenzer und 16-stimmiger Poly-Chain, gelingt der Einstieg im Handumdrehen. Diese Anleitung behandelt Einrichtung, Anschlüsse, Bedienung und Sicherheitshinweise.