1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Bild 1.1: Überview of the LE Solar Outdoor Motion Sensor Light WL4000.
2. Produktmerkmale
- Breiter Beleuchtungswinkel: Features 3 adjustable heads providing 270° wide lighting coverage.
- Hohe Helligkeit: Delivers 1000 lumens of 6500K daylight illumination.
- Effizientes Solarladen: Converts sunlight into electricity, charging during the day for night operation.
- PIR Bewegungs-Sensor: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
- Automatische Operation: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
- Langlebig und wetterfest: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
- Einfache Installation: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.
Image 2.1: Product dimensions and adjustable light heads.
Image 2.2: The 270-degree wide lighting angle.
Abbildung 2.3: Erfassungsbereich und -winkel des Bewegungssensors.
3. Packungsinhalt
- LE Solar Outdoor Motion Sensor Light (WL4000)
- Montagezubehör (Schrauben und Dübel)
- Bedienungsanleitung
4. Einrichtung und Installation
Follow these steps for proper installation of your solar light:
- Wählen Sie einen Standort: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
- Installieren Sie das Lamp Halter: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
- Aktiviere das Licht: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
- Hängen Sie das Licht auf: Carefully hang the solar light unit onto the installed lamp Halter.
- Lichtköpfe einstellen: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.
Image 4.1: Step-by-step installation process.
Image 4.2: Fixing the lamp Halter mit Schrauben.
Image 4.3: Activating the light using the mode switch.
Image 4.4: Hanging the light onto the lamp Halter.
5. Bedienungsanleitung
The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.
- Tagesbetrieb: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
- Nachtbetrieb: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
- Automatische Abschaltung: The light will automatically turn off approximately 20 seconds after no further motion is detected.
Image 5.1: Solar charging and motion-activated lighting cycle.
6. Wartung
To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:
- Reinigen Sie das Solarpanel: Wischen Sie das Solarpanel regelmäßig mit einem weichen, fusselfreien Tuch ab.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
- Hindernisse beseitigen: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
- Auf Schäden prüfen: Periodically check the light for any physical damage, loose connections, or signs of wear.
- Wetterbeständigkeit: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.
Image 6.1: IP65 waterproof, heat, and frost resistance features.
7. Fehlerbehebung
Falls Ihre Solarlampe nicht wie erwartet funktioniert, sollten Sie die folgenden häufigen Probleme und Lösungen in Betracht ziehen:
- Das Licht geht nachts nicht an:
- Stellen Sie sicher, dass der Netzschalter auf ON steht.
- Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
- Check if the solar panel is dirty or obstructed. Clean it thoroughly.
- Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
- Light stays on for a short period or is dim:
- Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
- The battery may not be fully charged. Ensure optimal sun exposure.
- Der Bewegungssensor erkennt nichts:
- Stellen Sie sicher, dass der Sensor nicht blockiert ist.
- Verify the light is installed within the recommended height range (1.5-3.5 meters).
- Test the sensor by walking within its detection range.
8. Spezifikationen
| Spezifikation | Detail |
|---|---|
| Marke | Lepro |
| Modellname | WL4000 |
| Teilenummer | 640003-DW |
| Lichtquellentyp | LED |
| Helligkeit | 1000 Lumen |
| Farbtemperatur | 6500K Tageslichtweiß |
| Number of Light Heads | 3 |
| Beleuchtungswinkel | 270° |
| Erkennungsabstand des Bewegungssensors | 16-26 Fuß (5-8 m) |
| Erfassungswinkel des Bewegungssensors | 120° |
| Wasserbeständigkeit | IP65 Wasserdicht |
| Stromquelle | Solarbetrieben |
| Batterie | 1 Lithium-Ionen-Akku (im Lieferumfang enthalten) |
| Material | ABS+GPPS |
| Technische Daten | 11.1 Zoll L x 4.65 Zoll B x 5.87 Zoll H |
| Artikelgewicht | 14.8 Unzen |
9. Garantie und Support
For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.
