1. Wichtige Sicherheitshinweise
WARNUNG: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- This product is designed for installation on wood stud walls (16-inch spacing), solid concrete walls, or brick walls. NICHT ausschließlich auf Trockenbauwänden installieren.
- Stellen Sie sicher, dass die Wandkonstruktion das Gesamtgewicht der Halterung und des Fernsehers sicher tragen kann.
- Die maximale Tragfähigkeit von 100 lbs (45.3 kg) darf nicht überschritten werden.
- Verify the VESA pattern of your TV is within the supported range (Min VESA 200x100 mm, Max VESA 600x400 mm).
- Use all provided hardware. Do not use parts that are damaged or missing.
- Verwenden Sie immer einen Balkensucher, um Holzbalken genau zu lokalisieren.
- Tragen Sie bei der Installation geeignete Sicherheitsausrüstung.
- Halten Sie Kinder und Haustiere während der Installation fern.
- Überprüfen Sie regelmäßig, ob die Halterung sicher befestigt ist und alle Befestigungselemente fest angezogen sind.
2. Produktüberschreitungview
The Mounting Dream MD2617-CA is a full motion TV wall mount designed for televisions between 42 and 84 inches, weighing up to 100 lbs. It offers extensive adjustability for optimal viewwinkeln.
Image: The Mounting Dream MD2617-CA full motion TV wall mount, shown with its articulating arms and a small level tool.
Hauptmerkmale:
- Universelle Kompatibilität: Supports most 42-84 inch TVs up to 100 lbs with VESA patterns from 200x100mm to 600x400mm.
- Full Motion Flexibility:
- Neigung: +5° to -15° for glare reduction.
- Schwenken: Up to ±45° for optimal viewaus verschiedenen Positionen.
- Verlängerung: Extends up to 16.6 inches from the wall and retracts to 2.5 inches.
- Nivellierung nach der Installation: ±4° adjustment for perfect TV leveling after mounting.
- Robuste Konstruktion: Made from cold-formed steel for safety and reliability.
- Integriertes Kabelmanagement: Clips on the arms help organize cables.
- Allen Key Storage: Convenient storage for the Allen key on the mount.
- Safety Clips: Mechanisms to securely lock the TV in place.
Bild: Detailliert view of the mount's features, including Allen key storage, TV locking clips, rubber mat for cushioning, and cable management clips.
3. Spezifikationen
| Modellnummer | MD2617-CA |
| Kompatibilität mit TV-Größen | 42 - 84 Zoll |
| Gewichtskapazität | 100 kg |
| VESA-Kompatibilität | Min: 200x100 mm, Max: 600x400 mm |
| Neigungswinkel | +5° / -15° |
| Schwenkwinkel | Up to ±45° (depending on TV size) |
| Verlängerung von der Wand | 2.5 Zoll (eingefahren) bis 16.6 Zoll (ausgefahren) |
| Nivellierung nach der Installation | ±4° |
| Abmessungen der Wandplatte | (Refer to specific diagram in packaging for exact dimensions, typically covers 16-inch stud spacing) |
| Material | Cold-formed steel |
| Farbe | Schwarz |
4. Einrichtungs- und Installationsanleitung
Before you begin, ensure you have all necessary tools and hardware. A stud finder, drill, level, and measuring tape are typically required. All hardware is provided in pre-labeled bags.
4.1 Compatible Wall Types:
This mount is designed for:
- Holzständerwände: Suitable for 8", 12", or 16" wood stud spacing. (Note: Not for studs wider than 16").
- Massive Betonwände
- Ziegelmauern
IMPORTANT: DO NOT install this TV mounting bracket on drywall alone.
Image: Illustrations showing the mount installed on wood stud, concrete, and brick walls, with a warning against drywall-only installation.
4.2 Schritt-für-Schritt-Installation:
Follow these general steps. Refer to the detailed paper template and instructions included in your package for precise measurements and hardware selection.
- Attach Brackets to TV Back:
Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes. Secure the two vertical TV brackets to the back of your television. Ensure they are centered and securely fastened.
Image: A three-step installation guide showing attaching brackets to the TV, installing the wall plate, and hanging the TV.
- Installieren Sie die Wandplatte:
Determine the desired height for your TV. Use a stud finder to locate the center of your wood studs. Mark the drill holes using the provided paper template. For concrete/brick walls, mark holes directly. Drill pilot holes as specified in the manual. Secure the wall plate to the wall using the appropriate lag bolts and washers. Use the included level to ensure the wall plate is perfectly horizontal.
- Fernseher an der Wandplatte befestigen:
Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated. Engage the safety locking clips to prevent accidental dislodgement. Perform any post-installation leveling adjustments as needed.
Concrete Anchors: If installing on concrete, concrete anchors (Anchor Size: φ10x50mm) can be provided upon request from Mounting Dream customer support.
5. Bedienungsanleitung
The MD2617-CA mount offers various adjustments to achieve your preferred viewing-Winkel.
5.1 Adjusting Tilt:
To adjust the vertical tilt of your TV (from +5° up to -15° down), loosen the tilt adjustment knobs on the TV brackets, position the TV to the desired angle, and then securely tighten the knobs. This helps reduce glare from lights or windows.
Image: A TV mounted on the wall, demonstrating the tilt range from +5 degrees up to -15 degrees down.
5.2 Adjusting Swivel and Extension:
The articulating arms allow you to swivel the TV left or right by up to ±45° and extend it up to 16.6 inches from the wall or retract it to 2.5 inches. Gently push or pull the TV to the desired position. The arms are designed for smooth movement.
Image: A TV mounted on the wall, demonstrating the swivel range of up to ±45 degrees.
Image: A diagram illustrating the mount's extension capability, extending 16.6 inches and retracting to 2.5 inches from the wall.
5.3 Post-Installation Leveling:
If your TV appears slightly unlevel after installation, you can make a fine adjustment of ±4° without removing the TV from the wall. Consult your specific manual for the exact mechanism, which typically involves loosening specific screws on the TV brackets, adjusting, and re-tightening.
Image: A TV mounted on the wall, showing the ability to level the screen by ±4 degrees after initial installation.
6. Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und den sicheren Betrieb Ihrer TV-Wandhalterung.
- Regelmäßige Inspektion: Every few months, visually inspect the mount and all connection points for any signs of wear, damage, or loosening.
- Befestigungselemente festziehen: Gently re-tighten any screws or bolts that may have loosened over time. Do not overtighten.
- Reinigung: Wischen Sie die Halterung mit einem weichen, trockenen Tuch ab, um Staub zu entfernen. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
- Schmierung: The articulating arms are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV or wall.
7. Fehlerbehebung
If you encounter issues with your Mounting Dream TV wall mount, refer to the following common solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Fernseher steht nach der Installation nicht waagerecht. | Initial installation slightly off; post-installation leveling not adjusted. | Use the ±4° post-installation leveling feature. Loosen the specific leveling screws, adjust the TV, and re-tighten. |
| Die Halterung fühlt sich locker oder wackelig an. | Wall plate not securely fastened; fasteners have loosened over time. | Immediately remove the TV. Check all lag bolts securing the wall plate to the wall. Ensure they are fully tightened into studs or concrete. If necessary, consult a professional. |
| Der Fernseher passt nicht an die Halterung. | Falsches VESA-Muster oder falsche TV-Größe/-Gewicht. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (Min VESA 200x100mm, Max VESA 600x400mm, 42-84 inches, up to 100 lbs). |
| Difficulty moving articulating arms. | Dust or lack of lubrication at pivot points. | Clean pivot points and apply a small amount of silicone-based lubricant if needed. Ensure no cables are obstructing movement. |
8. Garantie und Support
Mounting Dream products are designed for durability and reliability. This product comes with a warranty (refer to your purchase documentation for specific terms and duration).
For any pre-purchase questions, installation assistance, or support, the Mounting Dream customer service team is available 7 days a week.
- Kundendienst: Contact information can be found on the official Mounting Dream webWebsite oder Ihre Produktverpackung.
- Online-Ressourcen: Besuchen Sie die Mounting Dream Store on Amazon für zusätzliche Produktinformationen und Support.
