Einführung
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
Sicherheitshinweise
- Tragen Sie bei der Installation stets geeignete Schutzausrüstung, wie z. B. Handschuhe und Augenschutz.
- Vergewissern Sie sich vor der Verwendung, dass alle Komponenten sicher befestigt sind.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
Packungsinhalt
Ihr Paket sollte die folgenden Artikel enthalten:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- Strike Plates
- Befestigungsschrauben
- Installationsvorlage (falls enthalten)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
Setup und Installation
Erforderliche Werkzeuge:
- Kreuzschlitzschraubendreher
- Bandmaß
- Bleistift
- Bohren (falls Vorbereitung für eine neue Tür erforderlich ist)
- Wood Chisel (if new door preparation is needed)
Installationsschritte:
- Bereiten Sie die Tür vor: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- Installieren Sie den Riegel: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- Montieren Sie die Schließplatte: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- Testbetrieb: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
Bedienungsanleitung
Keyed Entry Knob:
- Zum Verriegeln von außen: Insert the key and turn it to lock the knob. Remove the key.
- To Unlock from Outside: Insert the key and turn it to unlock the knob.
- Zum Verriegeln von innen: Press or turn the button/thumbturn on the interior knob.
- To Unlock from Inside: Turn the interior knob or button/thumbturn.
Single Cylinder Deadbolt:
- Zum Verriegeln von außen: Insert the key and turn it to extend the deadbolt. Remove the key.
- To Unlock from Outside: Insert the key and turn it to retract the deadbolt.
- Zum Verriegeln von innen: Turn the thumbturn on the interior side to extend the deadbolt.
- To Unlock from Inside: Turn the thumbturn on the interior side to retract the deadbolt.
Wartung
- Reinigung: Clean the lockset regularly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- Schmierung: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
- Schraubenanzugsmoment: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Schlüssel lässt sich nicht drehen oder ist schwergängig. | Verschmutzungen im Schlüsselkanal, abgenutzter Schlüssel oder falsch ausgerichteter Zylinder. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Die Tür schließt nicht richtig, wenn das Schloss eingerastet ist. | Misaligned strike plate or door frame issues. | Adjust the strike plate position. Inspect the door frame for warping or damage. |
| Knob/Deadbolt feels loose. | Lockere Befestigungsschrauben. | Tighten the mounting screws evenly. Do not overtighten. |
Technische Daten
- Produktart: Keyed Entry Knob and Single Cylinder Deadbolt
- Modell: B36L1BD
- Material: Edelstahl, Metall
- Beenden: Satin Edelstahl
- Grad: 3 Grade (Residential)
- Türübergabe: Rechtshänder
- Adjustable Backset: 2-3/8 Zoll (60 mm) oder 2-3/4 Zoll (70 mm)
- Türstärkenbereich: 1-3/8 inches (35mm) to 1-3/4 inches (44mm)
- Passfedernut: KW1
- Keys Included: 4
- Produktabmessungen: Ungefähr 3.3 x 12.4 x 9.8 Zoll (8.4 x 31.5 x 24.9 cm)
- Verwendung im Innen-/Außenbereich: Im Freien
Garantie und Support
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.
