LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Einleitung

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Sicherheitshinweise

Bitte lesen Sie diese Sicherheitshinweise vor der Installation und Inbetriebnahme sorgfältig durch. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder anderen Gefahren führen.

• Professionelle Installation: Die Installation muss von einem qualifizierten Elektriker gemäß allen lokalen und nationalen Elektrovorschriften durchgeführt werden.
• Stromabschaltung: Vor der Installation, Wartung oder Reinigung des Geräts muss immer die Stromzufuhr am Sicherungsautomaten unterbrochen werden.
• Bandtage: Sicherstellung der Versorgungsvoltage matches the device's requirements (230 Volt AC).
• Umgebungsbedingungen: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Änderung: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Produktmerkmale

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Einrichtung und Installation

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Abbildung 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Abbildung 5.2: Nahaufnahme view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Montageort

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Elektrischer Anschluss

• WARNUNG: Trennen Sie die Stromversorgung, bevor Sie elektrische Verbindungen herstellen.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Bedienungsanleitung

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

6.1-Betriebsmodi

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Erkennungseinstellungen

The sensor allows for adjustment of the light duration after detection:

• Leuchtdauer: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Wartung

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Reinigung: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Inspektion: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Fehlerbehebung

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• Licht geht nicht an:
  • Prüfen Sie, ob das Netzteil angeschlossen und betriebsbereit ist.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Stellen Sie sicher, dass der Erfassungsbereich frei von Hindernissen ist.
  • Adjust the sensitivity settings if available.
• Das Licht bleibt dauerhaft an:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Das Licht geht unerwartet an:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Wenn das Problem nach dem Ausprobieren dieser Lösungen weiterhin besteht, wenden Sie sich bitte an den Kundendienst oder einen qualifizierten Elektriker.

9. Spezifikationen

10. Garantie und Support

The LEDVANCE 360DEG Wall Sensor comes with a 3 Jahr Herstellergarantie ab Kaufdatum, mit Deckung für Material- und Verarbeitungsfehler bei normalem Gebrauch.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE Markenshop.

Bitte bewahren Sie Ihren Kaufbeleg für Garantiezwecke auf.