IK Multimedia AXE I/O SOLO USB Audio Interface User Manual

1. Einleitung

The IK Multimedia AXE I/O SOLO is a premium 2-in/3-out USB audio interface designed for guitarists and musicians. It offers high-resolution 24-bit, 96 kHz audio conversion, advanced guitar tone shaping features, and comes bundled with powerful software like AmpliTube 5 SE and TONEX SE. This manual provides detailed instructions for setting up, operating, and maintaining your AXE I/O SOLO.

Abbildung 1.1: Frontansicht view of the IK Multimedia AXE I/O SOLO USB Audio Interface.

2. Lieferumfang

Upon unpacking your AXE I/O SOLO, please ensure all the following items are present:

• AXE I/O SOLO Audio Interface
• USB-A-auf-USB-B-Kabel
• Registration Card with Software Download Instructions

If any items are missing or damaged, please contact IK Multimedia support immediately.

3. Einrichtung

3.1. Treiberinstallation

1. Registrieren Sie Ihr Produkt: Visit the IK Multimedia website and register your AXE I/O SOLO using the provided serial number. This will grant access to software downloads and updates.
2. Treiber herunterladen: From your IK Multimedia user area, download the latest drivers for your operating system (Windows or macOS).
3. Treiber installieren: Follow the on-screen instructions to install the drivers. It is recommended to restart your computer after installation.

3.2. Hardware-Verbindungen

Connect your AXE I/O SOLO to your computer and other audio equipment as follows:

• USB-Verbindung: Connect the supplied USB cable from the AXE I/O SOLO's USB 2.0 port to an available USB port on your computer. The device is USB bus-powered.
• Instrument Input (Input 1): Connect your guitar or bass to the 1/4" TS input on the front panel.
• Microphone/Line Input (Input 2): Connect a microphone (XLR) or a line-level instrument (1/4" TRS) to the combo jack on the rear panel. Ensure 48V phantom power is enabled for condenser microphones.
• Line Outputs (1/L, 2/R): Connect your studio monitors or an external mixer to the 1/4" TRS Line Out jacks on the rear panel.
• Amp Ausgabe: Connect the 1/4" TS Amp Out jack on the front panel to your guitar amplifier's input for re-amping or direct monitoring through an amp.
• Kopfhörer: Connect your headphones to the 1/4" TRS Headphone jack on the front panel.
• MIDI Ein/Ausgang: Connect MIDI devices to the 5-pin DIN MIDI In and Out ports on the rear panel.
• Externe Kontrolle: Connect expression pedals or footswitches to the 1/4" TS Switch/Pedal 1 and 2 inputs on the rear panel for hands-free control of software parameters.

Figure 3.1: Rear panel showing USB, MIDI, External Control, Line Out, and Mic/Line In connections.

4. Bedienungsanleitung

4.1. Bedienelemente auf der Vorderseite

Figure 4.1: Front panel controls including Gain, Z-Tone, Monitor, Headphones, and Master knobs, along with input switches.

• GAIN (Input 1 & 2): Adjusts the input level for connected instruments or microphones. The LED meters indicate signal strength and clipping.
• Z-TONE (Input 1): This unique feature allows you to vary the impedance of the instrument input.
  • SCHARF: Higher impedance for a tighter, sharper sound.
  • Fett: Lower impedance for a thicker, bolder sound.
• PASSIVE/ACTIVE Switch (Input 1): Selects the appropriate input impedance for passive or active guitar pickups.
• PURE/JFET Switch (Input 1): Switches between a transparent PURE preamp and a Class A JFET input for a warmer, tube-like tone.
• 48V Button (Input 2): Activates +48V phantom power for condenser microphones. The LED illuminates when active.
• MONITOR-Knopf: Blends between the direct input signal (DIRECT) and the playback signal from your computer (DAW) for zero-latency monitoring.
• HEADPHONES Knob: Controls the output volume for the headphone jack.
• MASTER-Knopf: Controls the overall output volume for the Line Outputs.

5. Softwareintegration

The AXE I/O SOLO includes a powerful software bundle to enhance your recording and tone-shaping experience.

5.1. AmpliTube 5 SE

AmpliTube 5 SE provides a comprehensive suite of virtual guitar and bass amplifiers, cabinets, stompboxes, and rack effects. It allows you to create detailed signal chains and achieve a wide range of tones.

Figure 5.1: AXE I/O SOLO in use with a guitar and a laptop running AmpliTube 5 SE.

Abbildung 5.2: Die AmpliTube 5 SE software interface, showing various virtual ampVerstärker und Effekte.

5.2. TONEX SE

TONEX SE utilizes AI Machine Modeling technology to capture the sound of any amp, cabinet, or pedal and turn it into a Tone Model. You can play, practice, and record with thousands of Tone Models available.

Figure 5.3: The TONEX SE software interface, displaying various Tone Models and their settings.

5.3. Software Activation

After installing the drivers, follow the instructions provided with your registration card to download and activate AmpliTube 5 SE and TONEX SE from your IK Multimedia user account. Ensure your AXE I/O SOLO is connected during the activation process.

6. Wartung

• Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
• Lagerung: Store the AXE I/O SOLO in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Kabelpflege: Always handle cables by the connector, not the wire, to prevent damage.

7. Fehlerbehebung

If you encounter issues with your AXE I/O SOLO, consider the following common solutions:

• Kein Ton:
  • Check all cable connections (USB, instrument, monitors, headphones).
  • Ensure the AXE I/O SOLO is selected as the input/output device in your computer's sound settings and your DAW.
  • Adjust GAIN, MONITOR, HEADPHONES, and MASTER knobs.
  • Verify that the correct input mode (PASSIVE/ACTIVE, PURE/JFET) is selected for your instrument.
• Treiberprobleme:
  • Reinstall the latest drivers from the IK Multimedia webWebsite.
  • Versuchen Sie, eine Verbindung zu einem anderen USB-Anschluss an Ihrem Computer herzustellen.
  • Stellen Sie sicher, dass Ihr Betriebssystem auf dem neuesten Stand ist.
• Software erkennt Gerät nicht:
  • Ensure the AXE I/O SOLO drivers are correctly installed and the device is connected.
  • Check your DAW's audio preferences to ensure the AXE I/O SOLO is selected as the audio device.
  • Verify software activation status.
• Verzerrter Klang:
  • Reduce the input GAIN to prevent clipping (check the CLIP LEDs).
  • Ensure the correct input mode (PASSIVE/ACTIVE) is selected for your instrument.

For further assistance, refer to the official IK Multimedia support resources.

8. Spezifikationen

9. Garantie und Support

9.1. Garantieinformationen

The IK Multimedia AXE I/O SOLO is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official IK Multimedia webAuf der Webseite finden Sie die detaillierten Garantiebedingungen und deren Dauer.

9.2. Kundendienst

For technical support, product registration, software downloads, or any other inquiries, please visit the official IK Multimedia support page:

www.ikmultimedia.com/support

Das vollständige Benutzerhandbuch im PDF-Format finden Sie hier: AXE I/O SOLO User Manual (PDF)