MOUNTUP Monitor Mount Instruction Manual

1. Einleitung

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Sicherheitshinweise

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• Die maximale Tragfähigkeit von 17.6 lbs (8 kg) darf nicht überschritten werden.
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Halten Sie Kinder und Haustiere während der Installation fern.

3. Packliste

Vor Beginn der Installation prüfen Sie, ob alle Komponenten vorhanden und unbeschädigt sind.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

Das Paket sollte enthalten:

• Monitor Arm Assembly (Upper and Lower Arms)
• Schreibtischstange
• C-Clamp Base
• Komponenten der Ösenbasis
• VESA-Platte
• All necessary screws, washers, and Allen keys
• Bedienungsanleitung

4. Einrichtung und Installation

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp und Tüllenmontageoptionen.

4.1 C-Clamp Installation

1. Befestigen Sie die C-clamp base to the desk pole using the provided screws and Allen key.
2. Positionieren Sie die zusammengebaute Klammeramp and pole on the edge of your desk.
3. Ziehen Sie die C-Klamp Schrauben Sie die Halterung fest, bis sie sicher am Schreibtisch befestigt ist. Achten Sie darauf, dass sie stabil ist und nicht wackelt.

4.2 Tüllenmontage

1. Zerlegen Sie die C-Cl-Verbindung.amp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. Legen Sie Ihren Monitor vorsichtig mit dem Bildschirm nach unten auf eine weiche, saubere Oberfläche.
2. Richten Sie die VESA-Platte an den Befestigungslöchern auf der Rückseite Ihres Monitors aus (75x75mm oder 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Kabelmanagement

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Installationsvideoanleitung

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Betrieb und Anpassungen

The MOUNTUP monitor arm offers full motion capabilities for optimal viewKomfort.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Einstellung der Gasfederspannung

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Neigungseinstellung

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewwinkeln.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Schwenk- und Drehgelenk

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihrer Monitorhalterung.

• Reinigung: Wischen Sie die Halterung mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel, die die Oberfläche beschädigen könnten.
• Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
• Gasfeder: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

7. Fehlerbehebung

Sollten Sie auf Probleme stoßen, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• Mount feels unstable or wobbly: Stellen Sie sicher, dass die C-Clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Sollten die Probleme weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

8. Spezifikationen

9. Garantie und Support

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.