JJRC H36 Mini RC Quadcopter Drohne Benutzerhandbuch

1. Einleitung

The JJRC H36 is a compact and agile mini RC quadcopter drone designed for both indoor and outdoor flight. Featuring a 6-axis gyro for stable flight, 2.4GHz control for anti-interference, and functions like 3D-flips and headless mode, it offers an engaging flying experience. This manual provides essential information for the safe and effective operation of your H36 drone.

2. Produktüberschreitungview

2.1 Hauptmerkmale

• Sci-fi design with fine workmanship.
• LED lights for night flight visibility.
• 2.4GHz technology for anti-interference control.
• 360° propeller protectors for enhanced safety.
• High/low speed switch for varied flight conditions.
• 3D-flip function for acrobatic maneuvers.
• Headless mode for simplified orientation control.
• One-key return function for easy recall.
• Newest 6-Axis Gyro control system for stable flight.

2.2 Packungsinhalt

• 1 x JJRC H36 Quadcopter
• 1 x 2.4-GHz-Sender (Modus 2)
• 2 x 3.7V 150mAh Li-Po-Akku
• 1 x USB-Ladekabel
• 4 x Ersatzpropeller
• 1 x englisches Handbuch

Image 1: The JJRC H36 drone, two 150mAh Li-Po batteries, and the 2.4G remote controller.

Bild 2: Eine Nahaufnahme view of the JJRC H36 drone, highlighting its compact design and propeller protectors.

3. Sicherheitshinweise

3.1 Allgemeine Warnungen

• Dieses ferngesteuerte Modell ist kein Spielzeug und nicht für Kinder unter 14 Jahren geeignet. Von Kindern fernhalten.
• Carefully read the instruction manual before any use. If you are a beginner, it is advisable to be assisted by an experienced adult.
• This RC drone is equipped with coreless DC motors; continuous use with different batteries is not suggested to prevent motor damage.

3.2 Battery Cautions

• Batterien dürfen nicht überladen oder tiefentladen werden.
• Do not place batteries near high-temperature conditions.
• Werfen Sie Batterien nicht ins Feuer.
• Werfen Sie Batterien nicht ins Wasser.
• The USB charger is only for DC computer USB ports; never use it with AC circuits.
• Always remember never to over-charge the battery.

4. Einrichtung

4.1 Aufladen des Drohnenakkus

1. Schließen Sie den Drohnenakku an das mitgelieferte USB-Ladekabel an.
2. Plug the USB charging cable into a computer's USB port.
3. Die Ladezeit beträgt ungefähr 50 Minuten. Nicht überladen.

4.2 Einbau des Drohnenakkus

1. Stellen Sie sicher, dass die Drohne ausgeschaltet ist.
2. Carefully insert the charged 3.7V 150mAh Li-Po battery into the drone's battery compartment.
3. Befestigen Sie die Batteriefachabdeckung.

4.3 Einlegen der Senderbatterien

1. Öffnen Sie das Batteriefach auf der Rückseite des 2.4-GHz-Senders.
2. Insert two AA batteries (not included), ensuring correct polarity.
3. Schließen Sie den Batteriefachdeckel.

Bild 3: Eine Nahaufnahme view of the JJRC H36 remote controller, showing its controls and power switch.

4.4 Binding the Drone with Transmitter

1. Stellen Sie sicher, dass der Akku der Drohne vollständig geladen ist.
2. Stellen Sie die Drohne auf eine ebene Fläche.
3. Schalten Sie die Drohne ein.
4. Within 2 seconds, power on the transmitter.
5. The drone's lights will stop flashing and become solid, indicating a successful binding.

5. Bedienungsanleitung

5.1 Grundlegende Flugsteuerung

The 2.4G transmitter (Mode 2) controls the drone's movement:

• Linker Stick (Gas/Gierachse):
  • Aufwärts/Abwärts: Höhe erhöhen/verringern.
  • Links/Rechts: Drohne nach links/rechts drehen (Gieren).
• Rechter Stick (Neigung/Rolle):
  • Up/Down: Move drone forward/backward (pitch).
  • Left/Right: Move drone left/right (sideward flight/roll).

5.2 Sonderfunktionen

• Hoch-/Niedriggeschwindigkeitsschalter: Press the designated button on the transmitter to toggle between high and low-speed modes, suitable for different flying environments and skill levels.
• 3D-Flip Function: To perform a 3D-flip, fly the drone to a sufficient height, then press the 3D-flip button and push the right stick in the desired flip direction (forward, backward, left, or right).
• Headless-Modus: Activate headless mode by pressing the dedicated button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front direction. Press again to exit.
• Rückgabe mit einer Taste: Press the one-key return button, and the drone will attempt to fly back towards its take-off point. This function is an aid and not a precise landing system.

6. Wartung

• Propellerinspektion: Regularly check propellers for any damage (bends, cracks). Replace damaged propellers with spare ones provided in the package. Ensure propellers are installed correctly.
• Reinigung: Use a soft, dry cloth to clean the drone and transmitter. Avoid using water or solvents.
• Lagerung: When not in use, store the drone and transmitter in a cool, dry place, away from direct sunlight. Remove batteries from the transmitter if storing for extended periods.

7. Fehlerbehebung (FAQ)

• The aircraft fails to connect with the transmitter.
  Stellen Sie zunächst sicher, dass der Akku vollständig geladen ist. Schalten Sie dann die Drohne und den Sender innerhalb von 2 Sekunden nacheinander ein.
• One or more motors do not work.
  Ensure the drone was placed on a flat surface during the binding process. If the issue persists, the motor may be damaged and require replacement.
• Accessories are missing from the package.
  Carefully check the gift box package inside and outside. If items are still missing, contact customer service.
• The aircraft is out of balance (cannot fly, deviates, spins on the ground).
  Check that the propellers are installed in the correct way and are not damaged. Ensure the drone was calibrated on a flat surface during binding.
• During charging, the battery and charging cable melt.
  The USB charger is only designed for DC computer USB ports. Never use it with AC circuits. Always ensure not to over-charge the battery.

8. Spezifikationen

9. Garantie und Support

Informationen zu Garantie und technischem Support finden Sie in den Garantiebestimmungen des Händlers oder wenden Sie sich direkt an den Hersteller. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.