Einführung
This manual provides essential information for the proper setup, operation, and maintenance of your 360 S7 Pro Robot Vacuum and Mop. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Image: The 360 S7 Pro Robot Vacuum and Mop, showcasing its sleek black design and accompanying mobile app interface.
Installationshandbuch
1. Auspacken und Komponenten
Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Stellen Sie sicher, dass alle unten aufgeführten Teile vorhanden sind:
- 360 S7 Pro Robot Vacuum and Mop
- Ladestation
- Netzteil
- Wassertank und Wischmopp
- Reinigungswerkzeug (für Bürstenwalze)
- Seitenbürsten
- Benutzerhandbuch (dieses Dokument)
2. Platzierung der Ladestation
Place the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the dock and 1.5 meters (4.9 feet) in front of it. This allows the robot to easily return for charging.
3. Erstes Aufladen
Connect the power adapter to the charging dock and plug it into a wall outlet. Place the robot vacuum onto the charging dock. The indicator lights on the robot will illuminate to show it is charging. For first use, allow the robot to fully charge, which typically takes approximately 4-5 hours.
4. App-Installation und Verbindung
Download the "360Robot" app from your mobile device's app store. Follow the in-app instructions to create an account and connect your 360 S7 Pro to your home Wi-Fi network. Note that the 360 S7 Pro only supports 2.4GHz Wi-Fi networks and is not compatible with 5GHz networks.
5. Erste Kartierung
For optimal performance, allow the robot to complete an initial mapping run of your home without interruption. During this process, the robot uses its LiDAR navigation system to create a detailed map of your floor plan. Ensure all doors to areas you wish to map are open. The robot may return to its charging dock multiple times to recharge during this process. Do not manually move the robot or interrupt its cleaning cycle until it announces "Cleaning is complete!" and returns to the dock on its own.
Image: The 360 S7 Pro demonstrating its precision LiDAR navigation, creating a virtual map of the room.
Bedienungsanleitung
1. Grundlegende Steuerelemente
- Geräteinterne Taste: Press the main power button on the robot to start or pause a cleaning cycle. Press and hold to send the robot back to the charging dock.
- Mobile App: The "360Robot" app provides comprehensive control over your robot, including starting/stopping cleaning, selecting cleaning modes, setting schedules, and managing maps.
2. Reinigungsmodi
The 360 S7 Pro offers versatile cleaning options:
- Nur Staubsauger: Zur Sammlung von trockenem Schutt.
- Nur Wischmopp: For wet cleaning with the water tank attached.
- Gleichzeitig staubsaugen und wischen: Performs both functions in a single pass. Ensure the water tank is filled and the mop pad is attached.
Image: The 360 S7 Pro in action, illustrating its dual vacuuming and mopping capabilities.
3. Smart Features via App
Utilize the "360Robot" app to access advanced cleaning functionalities:
- Virtual Boundaries and No-Go Zones: Draw virtual lines or rectangular zones on the map within the app to restrict the robot from entering specific areas. This is useful for protecting delicate items or preventing access to certain rooms. When mopping, you can set "no-mop zones" to avoid carpets.
- Selektive Raumreinigung: After mapping, the app will divide your home into distinct rooms. You can select specific rooms for cleaning, allowing for targeted cleaning based on your needs.
- Zonenreinigung: Define a custom area on the map for the robot to clean. This is ideal for cleaning spills or high-traffic spots.
- Geplante Reinigung: Set up daily or weekly cleaning schedules for automated cleaning at your preferred times.
- Saugkrafteinstellung: Adjust the suction power from Quiet (600 Pa) to Standard (1000 Pa), Powerful (1500 Pa), or Max (2650 Pa) depending on the cleaning requirements. The robot can automatically increase suction on carpets.
Image: An illustration of the customizable cleaning options available through the 360Robot app, including scheduled, selective room, zone, deep, no-go lines, and no-mop zones.
Image: The 360 S7 Pro demonstrating the virtual boundaries feature, preventing the robot from entering a designated area.
Image: A visual representation of the 360 S7 Pro's adjustable suction power levels, ranging from Quiet (600 Pa) to Max (2650 Pa), suitable for various debris types.
4. Sprachsteuerung
The 360 S7 Pro is compatible with Amazon Echo and Google Home. Link your robot vacuum to your smart home assistant through the respective app to control it using voice commands.
Wartung
Regular maintenance ensures optimal performance and extends the lifespan of your 360 S7 Pro. Always power off the robot before performing any maintenance.
1. Dust Bin Emptying
Empty the dust bin after each cleaning cycle or when the app indicates it is full. To empty, press the dust bin release button, remove the bin, open its lid, and discard the collected debris.
2. Filterreinigung/Filteraustausch
The robot uses a cloth filter. Tap the filter gently to remove loose dirt. For deeper cleaning, rinse the filter under running water. Ensure the filter is completely dry before reinserting it into the dust bin. Replace the filter every 3-6 months, or as needed, to maintain suction efficiency.
3. Reinigung der Bürstenwalze
Periodically remove the main brush roll and side brushes to clear any tangled hair or debris. Use the provided cleaning tool to cut and remove hair wrapped around the brush roll. Ensure the brushes are free of obstructions for effective cleaning.
4. Wartung des Wassertanks und des Wischmoppbezugs
After mopping, empty any remaining water from the water tank. Remove the mop pad and rinse it thoroughly. Allow both the water tank and mop pad to air dry completely before storing or reattaching.
5. Sensorreinigung
Wipe the robot's sensors (including cliff sensors, wall sensors, and the LiDAR sensor window) with a clean, dry cloth. Keeping sensors clean is crucial for accurate navigation and obstacle avoidance.
Fehlerbehebung
If you encounter issues with your 360 S7 Pro, refer to the common problems and solutions below. For more complex issues, contact customer support.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Roboter lädt nicht. | Charging dock not powered; poor contact with charging pins; robot not properly docked. | Ensure charging dock is plugged in. Clean charging pins on both robot and dock. Re-dock the robot, ensuring proper alignment. |
| Der Roboter bleibt häufig stecken. | Hindernisse (Kabel, Teppiche, Möbel); verschmutzte Sensoren. | Clear obstacles from the cleaning path. Use virtual boundaries for problem areas. Clean all sensors. |
| Probleme mit der App-Verbindung. | Falsches WLAN-Passwort; 5-GHz-WLAN-Netzwerk; schwaches Signal. | Verify Wi-Fi password. Ensure you are connected to a 2.4GHz network. Move robot closer to router. Restart router and robot. |
| Mangelhafte Reinigungsleistung. | Full dust bin; dirty filter; tangled brushes. | Empty dust bin. Clean or replace filter. Clean main brush roll and side brushes. |
If the issue persists after attempting these solutions, please refer to the Warranty and Support section for further assistance.
Produktspezifikationen
| Marke | 360 |
| Modell | S7 Pro |
| Besondere Merkmale | Smart Mapping, Selective Room Cleaning, LiDAR Navigation, Logical Navigation, Scheduling |
| Farbe | Schwarz |
| Technische Daten | 17.13 Zoll L x 17.13 Zoll B x 6.65 Zoll H |
| Im Lieferumfang enthaltene Komponenten | Bürste |
| Filtertyp | Tuch |
| Akkulaufzeit | 120 Мinuten |
| Fassungsvermögen des Wassertanks | 170 Milliliter |
| Stromquelle | Batteriebetrieben |
| Batterien im Lieferumfang enthalten | Ja (1 Lithium-Metall-Batterie) |
| Kontrollmethode | Sprache, App |
| Lithium-Batterie-Voltage | 3.7 Volt |
| Kompatible Geräte | Amazon Echo, Google Home |
| Artikelgewicht | 10.58 Pfund |
Garantie und Support
Garantieinformationen
The 360 S7 Pro Robot Vacuum and Mop comes with a one-year worry-free warranty service from the date of purchase. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.
Kundenservice
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact 360 Smart Life Customer Support. We offer 24-hour technical support and aim to respond to all inquiries within 24 hours. You can reach us through the "360Robot" app or via our official webWebsite.
A local after-service center is available in California, USA, for convenient support.
Image: The 360 Smart Life company logo, representing the brand's commitment to customer service.
