Hansong A-white With Bluetooth-32x23in

Hansong Vanity Mirror with Lights and Bluetooth

Model: A-white With Bluetooth-32x23in

Brand: Hansong

Einführung

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Hansong Vanity Mirror with Lights and Bluetooth. This extra-large Hollywood-style makeup mirror features 18 LED bulbs, three color lighting modes, USB charging capabilities, and integrated Bluetooth speakers for an enhanced user experience. Please read this manual thoroughly before use to ensure proper functionality and safety.

Sicherheitshinweise

Image showing a comparison between ordinary glass shattering and tempered glass remaining intact, highlighting the safety feature of the Hansong mirror.

Figure 1: Tempered Glass for Enhanced Safety

Packungsinhalt

Prüfen Sie beim Öffnen der Verpackung, ob alle Komponenten vorhanden und in einwandfreiem Zustand sind:

Aufstellen

Tischmontage

  1. Carefully remove the mirror from its packaging.
  2. Locate the screws at the bottom of the mirror frame. Unscrew them if they are pre-installed.
  3. Align the holes in the detachable base with the corresponding holes at the bottom of the mirror.
  4. Insert and tighten the screws to secure the base firmly to the mirror.
  5. Place the assembled mirror on a stable, flat surface.
  6. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing three steps for tabletop mirror assembly: unscrewing, aligning base, and tightening screws.

Figure 2: Tabletop Installation Steps

Installation der Wandhalterung

The mirror is designed with two back holes for wall mounting. Ensure the wall can support the mirror's weight (approximately 18.08 pounds). Professional installation is recommended for wall mounting.

  1. Identify the desired location on the wall. Ensure it is a sturdy surface.
  2. Measure the distance between the two mounting holes on the back of the mirror.
  3. Mark the corresponding points on the wall using a pencil and a level to ensure horizontal alignment.
  4. Drill pilot holes at the marked locations. Insert wall anchors if necessary (e.g., for drywall).
  5. Screw the provided mounting hardware (screws) into the wall, leaving a small portion protruding to hang the mirror.
  6. Carefully lift the mirror and align the back holes with the screws on the wall. Gently lower the mirror until it is securely seated.
  7. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.
Diagram showing mirror dimensions and options for tabletop stand or wall mount installation.

Figure 3: Mirror Dimensions and Installation Options

Bedienungsanleitung

1. Power On/Off and Lighting Modes

The mirror features touch-sensitive controls located on the mirror surface.

Image showing the three color lighting modes: Cold Light, Natural Light, and Warm Light, with examples of suitable makeup types.

Abbildung 4: Drei Farbbeleuchtungsmodi

Image demonstrating dimmable lights with a slider from 'Sofe light' to 'Cold light' and touch controls on the mirror.

Abbildung 5: Helligkeitsanpassung

2. Bluetooth-Konnektivität

The mirror is equipped with two Bluetooth speakers and a microphone, allowing you to play music and answer calls.

  1. Ensure the mirror is powered on.
  2. Activate Bluetooth on your smartphone or other Bluetooth-enabled device.
  3. Suchen nach available Bluetooth devices. The mirror will appear as "Hansong Mirror" or similar.
  4. Select the mirror from the list to pair. A confirmation sound will indicate successful pairing.
  5. Once paired, you can play audio through the mirror's speakers and use the integrated microphone for calls.
Image showing a hand pointing to a Bluetooth icon on the mirror, with a smartphone displaying music playback, indicating connection to the mirror's speakers.

Figure 6: Connecting to Bluetooth Speakers

3. USB-Ladeanschluss

A USB output charging port is located on the side of the mirror, allowing you to charge your phone or other USB-powered devices.

Close-up image of the mirror's side showing a USB port with a charging cable connected to a smartphone.

Figure 7: USB Output Charging Port

4. 10X Magnifying Mirror

The included 10X magnifying mirror is detachable and features suction cups for easy attachment to the main mirror or any smooth surface. It is useful for detailed tasks such as eyebrow plucking or precise eye and lip makeup application.

Image showing the 10X magnifying mirror with suction cups, alongside close-ups of eye and lip makeup application.

Figure 8: 10X Magnifying Mirror

Wartung

Fehlerbehebung

ProblemMögliche UrsacheLösung
Die Spiegelbeleuchtung funktioniert nicht.
  • Das Netzkabel ist nicht richtig eingesteckt.
  • Die Steckdose funktioniert nicht.
  • Touch sensor not responding.
  • Ensure the power cord is fully inserted into both the mirror and the wall outlet.
  • Testen Sie die Steckdose mit einem anderen Gerät.
  • Gently tap the touch sensor. If unresponsive, unplug and re-plug the mirror.
Bluetooth will not connect.
  • Bluetooth am Gerät ist ausgeschaltet.
  • Mirror is not in pairing mode or already connected to another device.
  • Device is too far from the mirror.
  • Stellen Sie sicher, dass Bluetooth auf Ihrem Gerät aktiviert ist.
  • Turn the mirror off and on again. Disconnect from other devices if necessary.
  • Move your device closer to the mirror (within 30 feet/10 meters).
Das Laden über USB funktioniert nicht.
  • Mirror is not powered on.
  • USB-Kabel ist defekt.
  • Device is not compatible or drawing too much power.
  • Ensure the mirror is plugged in and powered on.
  • Versuchen Sie es mit einem anderen USB-Kabel.
  • Ensure your device is compatible with standard USB charging.

Technische Daten

MarkeHansong
ModellA-white With Bluetooth-32x23in
Technische Daten23 Zoll L x 32 Zoll B
RahmenmaterialMetall
MontagetypTisch-/Wandmontage
Besondere MerkmaleLighted, Touch Sensor, USB Charging, Bluetooth Speakers
Beleuchtungsmodi3 Color (Warm, Cool, Natural)
Vergrößerung10x (abnehmbarer Spiegel)
Artikelgewicht18.08 Pfund
UPC194230337378

Garantie und Support

Hansong is committed to providing high-quality products. While the mirror is designed for durability with tempered glass, unforeseen issues may occur.

For any product-related inquiries, technical support, or warranty claims, please contact Hansong customer service directly. Please have your purchase details and model information ready when contacting support.

Contact information can typically be found on the Hansong official weboder über Ihre Verkaufsstelle.

Zugehörige Dokumente - A-white With Bluetooth-32x23in

Vorview Bedienungsanleitung für LED-Schminkspiegel im Hollywood-Stil
Bedienungsanleitung für den LED-Schminkspiegel im Hollywood-Stil mit detaillierten Informationen zu Funktionen, Bedienung, Sicherheitsvorkehrungen und FCC-Konformität. Inklusive kabellosem Laden und Bluetooth-Konnektivität.
Vorview Montageanleitung für einen weißen Schminktisch mit beleuchtetem Spiegel und Glasplatte
Ausführliche Montageanleitung für den DIYSET Schminktisch in Weiß mit beleuchtetem Spiegel, Glasplatte und 3-farbiger LED-Beleuchtung. Enthält eine Schritt-für-Schritt-Anleitung, eine Teileliste und Sicherheitshinweise für das Modell dfse1000 / NGSZT009.
Vorview Installationsanleitung und Funktionen des KEONJINN Hollywood-Kosmetikspiegels
Umfassende Installationsanweisungen und wichtige Funktionen für den KEONJINN Hollywood-Kosmetikspiegel, einschließlich Modelldetails, Funktionsbeschreibungen und Montageanleitungen.
Vorview DRIPEX DP364-A Kosmetikspiegel Benutzerhandbuch
Benutzerhandbuch für den DRIPEX DP364-A Vanity Makeup Mirror mit Informationen zu Montage, Betrieb, Sicherheitswarnungen, Wartung und FCC-Konformität.
Vorview FAMAPY Schminktisch mit Spiegel und Beleuchtung - Montageanleitung
Ausführliche Montageanleitung für den FAMAPY Schminktisch mit Spiegel und Beleuchtung, inklusive Teileliste, Schritt-für-Schritt-Anleitung und wichtigen Sicherheitshinweisen. Diese Anleitung gilt für das Modell KF210096-01.