1. Produktüberschreitungview
The Beghelli Emergency LED Lamp (Model BEG19500) is a high-quality emergency lighting solution designed to illuminate areas during power outages. This versatile lamp can be installed on walls, ceilings, or recessed, making it suitable for various environments. It features an 11W LED light source and is equipped with a long-lasting LiFe 3.2V 0.5 Ah battery, backed by a 5-year warranty.
Its robust design ensures functionality even in industrial settings, with an IP42 protection rating and IK05 impact resistance.
Abbildung 1: Vorderseite view of the Beghelli Emergency LED Lamp. Die lamp features a white base and a transparent polycarbonate cover, revealing the LED light source inside.
2. Sicherheitshinweise
Always read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Vor Beginn jeglicher Installations- oder Wartungsarbeiten muss die Stromversorgung unterbrochen werden.
- This product operates on 230V. Consult a qualified electrician if unsure about wiring.
- Setzen Sie das l nicht ausamp to extreme temperatures or direct water spray beyond its IP42 rating.
- Do not attempt to open or modify the battery compartment or internal components, except as explicitly instructed.
- Dispose of batteries and electronic components according to local regulations. More information can be found on the manufacturer's website or local waste management authorities.
3. Installation und Einrichtung
The Beghelli Emergency LED Lamp offers flexible installation options:
- Vorbereitung:
- Stellen Sie sicher, dass die Hauptstromversorgung des Installationsbereichs am Leitungsschutzschalter ausgeschaltet ist.
- Pack das l ausamp and verify all components are present: the lamp unit and included battery.
- Montagemöglichkeiten:
Die lamp can be mounted on a wall, ceiling, or recessed. The unit has 3 pre-breakage inputs (ø16) and can be installed on a standard 503 recessed box.
- Wand-/Deckenhalterung: Mark the desired mounting points using the lamp's base as a template. Drill holes and secure the lamp mit passenden Schrauben (nicht im Lieferumfang enthalten).
- Einbaumontage: Prepare the recess opening according to the lamp's dimensions (L 280 x H 119 x P 46 mm). Ensure sufficient space for wiring.
- Verdrahtung:
- Connect the 230V power supply wires to the lamp's terminals. Ensure correct polarity.
- Die lamp is designed for simple connection. If replacing an older unit, existing wiring may be compatible.
- Einlegen der Batterie:
The LiFe 3.2V 0.5 Ah battery is included and typically pre-installed or easily connected. Ensure it is securely connected before closing the lamp Abdeckung.
- Endmontage:
Secure the transparent polycarbonate screen onto the lamp unit. Ensure it clicks into place for proper IP42 protection.
Figure 2: Photometric curve illustrating the light distribution pattern of the Beghelli Emergency LED Lamp. This diagram shows the intensity of light emitted at various angles.
4. Bedienungsanleitung
The Beghelli Emergency LED Lamp operates automatically in emergency mode (SA/SE).
- Normalbetrieb: When main power (230V) is present, the lamp's battery charges. The LED light remains off.
- Notoperation: Im Falle eines Stromausfallstage (blackout), the lamp automatically switches on, drawing power from its internal battery to provide emergency illumination.
- Batterielebensdauer: Die lamp provides 120 lumens for 1 hour or 80 lumens for 2 hours in emergency mode, depending on the configured setting. Refer to the installation instructions for details on adjusting this setting (if applicable, often involves cutting a wire or jumper as per customer reviewS).
- Testen: Periodically test the emergency function by temporarily cutting the main power supply to the lamp's circuit. The lamp should illuminate immediately. Restore power after testing.
5. Wartung
Regular maintenance ensures optimal performance and longevity of your emergency lamp.
- Reinigung: Clean the transparent polycarbonate screen periodically with a soft, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Batterieprüfung: The LiFe battery has a 5-year warranty. While designed for long life, it is recommended to perform a full discharge test annually to assess battery health. Allow the lamp to operate until the battery is depleted, then restore power to allow it to fully recharge.
- Sichtprüfung: Jährlich die l überprüfenamp for any signs of physical damage, loose connections, or discoloration.
- Ersatz: Wenn das lamp fails to illuminate during a power outage or if the battery duration significantly decreases, the battery may need replacement. Contact a qualified technician for battery replacement.
6. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lamp leuchtet nicht bei Stromausfalltage. |
|
|
| Lamp illuminates dimly or for a short duration. |
|
|
| Lamp bleibt ständig an. |
|
|
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Beghelli |
| Modellnummer | BEG19500 |
| Stromversorgung | 230 V |
| Wastage | 11 W |
| Lichtstrom | 120 lumens (1 hour) / 80 lumens (2 hours) |
| Akku-Typ | LiFe 3.2V 0.5 Ah (Lithium Metal) |
| Batterie im Lieferumfang enthalten | Ja |
| Installationstyp | Wall mount, Ceiling mount, Recessed |
| Abmessungen (L x H x P) | 280 x 119 x 46 mm (11.02 x 4.69 x 1.81 Zoll) |
| Gewicht | 400 Gramm (0.88 Pfund) |
| Farbe | Weiß |
| Material | Polycarbonate (Screen: Transparent Polycarbonate) |
| Schutzgrad | IP42 |
| Schlagfestigkeit | IK05 |
| Betriebsart | SA/SE (Emergency) |
8. Garantie und Support
The Beghelli Emergency LED Lamp (Model BEG19500) comes with a 5 Jahr Garantie on its LiFe 3.2V 0.5 Ah battery, ensuring long-term reliability.
For technical support, service, or warranty claims, please contact Beghelli customer service through their official webKaufen Sie vor Ort oder bei autorisierten Händlern. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
For information on recycling and disposal of the product, especially the battery and LED components, please refer to local regulations and guidelines for electronic waste. More information can be found on the manufacturer's website or local waste management authorities.
