Einführung
This manual provides comprehensive instructions for the setup, operation, and maintenance of your NiTHO Drive Pro V16 Gaming Steering Wheel. Please read this manual carefully before use to ensure proper functionality and to maximize your gaming experience.
Image: The complete NiTHO Drive Pro V16 setup, including the steering wheel, pedal unit, and gear shifter.
Packungsinhalt
Stellen Sie sicher, dass alle Elemente vorhanden sind, bevor Sie mit der Einrichtung fortfahren:
- NiTHO Drive Pro V16 Steering Wheel with integrated shifter
- Pedaleinheit (Gas und Bremse)
- Montage Clamps (2x)
- Benutzerhandbuch (dieses Dokument)
Aufstellen
1. Montage des Lenkrads
The Drive Pro V16 can be securely mounted to a table or racing stand using the included clamps or suction cups.
Image: Left: Two mounting clamps for securing the wheel to a surface. Right: Suction cups on the underside of the steering wheel base for additional stability.
- Stellen Sie das Lenkrad auf eine stabile, ebene Fläche.
- Befestigen Sie die beiden Befestigungsklammernamps an den dafür vorgesehenen Schlitzen an der Unterseite des Lenkradsockels.
- Ziehen Sie die Klammer fest.amps securely to the table or stand.
- Ensure the suction cups on the base are pressed firmly against the surface for maximum stability.
2. Anschließen der Pedale
Connect the pedal unit to the steering wheel using the dedicated cable.
Bild: Rückseite view of the steering wheel showing the cable connection point for the pedal unit, with the pedal unit visible in the background.
- Locate the pedal input port on the back of the steering wheel base.
- Plug the cable from the pedal unit into this port.
- Position the pedal unit on the floor in a comfortable and stable position. The footrest can be folded out for added comfort.
3. Systemverbindung
The Drive Pro V16 is compatible with multiple platforms. Connect the steering wheel to your gaming system using the USB cable.
Image: Connection diagrams for PC, PS4, and Nintendo Switch. For PS4, a micro USB cable (not included) is required to connect the PS4 controller to the steering wheel.
- PC: Plug the steering wheel's USB cable directly into an available USB port on your PC.
- PlayStation 3/4: Plug the steering wheel's USB cable into an available USB port on your console. For PS4, connect your official PS4 controller to the steering wheel's dedicated USB port using a micro USB cable (not supplied).
- Xbox One/Series X|S: Plug the steering wheel's USB cable into an available USB port on your console. Connect your official Xbox controller to the steering wheel's dedicated USB port using a USB cable (not supplied).
- Nintendo-Schalter: Plug the steering wheel's USB cable into an available USB port on the Switch Dock. Ensure "Pro Controller Wired Communication" is enabled in the Switch system settings.
Bedienungsanleitung
1. Grundlegende Steuerelemente
Image: Diagram highlighting the front controls of the steering wheel, including the D-pad, action buttons, and sensitivity adjustment buttons.
- Lenkrad: Provides 270 degrees of rotation for precise steering control.
- Pedalanschlüsse: The left pedal is the brake, and the right pedal is the accelerator.
- Gangschalter: The integrated sequential gear shifter on the right side allows for manual gear changes.
- Schaltwippen: Located behind the steering wheel, these allow for quick up/down gear shifts.
- Aktionsschaltflächen: Standard gaming buttons (A, B, X, Y, etc.) are located on the wheel for easy access.
- Steuerkreuz: Zur Menünavigation und Richtungseingabe.
2. Empfindlichkeitseinstellung
The steering wheel features 3 levels of sensitivity adjustment to suit different driving styles and game requirements.
- Locate the sensitivity adjustment buttons on the left side of the steering wheel.
- Press the "Sensitivity +" or "Sensitivity -" buttons to cycle through the three levels (Low, Mid, High).
- Adjust the sensitivity to your preference for optimal control in various racing scenarios.
3. Vibrationsrückkopplung
The Drive Pro V16 features dual vibration motors for realistic driving feedback, simulating road conditions and impacts.
- Vibration feedback is automatically enabled when supported by the game and platform.
- Ensure your game's settings have vibration or force feedback enabled for the best experience.
Wartung
Proper maintenance will extend the life of your NiTHO Drive Pro V16.
- Reinigung: Use a soft, dry cloth to wipe down the steering wheel, pedals, and shifter. Do not use abrasive cleaners or solvents.
- Lagerung: Bewahren Sie das Gerät bei Nichtgebrauch an einem sauberen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Kabelpflege: Avoid sharp bends or kinks in the cables. Do not pull on the cables to disconnect the unit.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Steering wheel not recognized by console/PC. | Incorrect connection, driver issue (PC), or console settings. |
|
| Keine Vibrationsrückmeldung. | Game settings, or game does not support vibration. |
|
| Pedale reagieren nicht. | Pedaleinheit nicht richtig angeschlossen. |
|
| Steering wheel feels too sensitive/not sensitive enough. | Sensitivity setting needs adjustment. |
|
Technische Daten
- Modellname: MLT-DP16-K
- Produktname: NiTHO Drive Pro V16 Racing Wheel
- Raddurchmesser: 10 Zoll (255 mm)
- Drehwinkel: 270 Grad von Anschlag zu Anschlag
- Vibration: Dual rumble vibration motors
- Empfindlichkeitsstufen: 3 einstellbare Stufen
- Schalthebel: Integrated sequential gear shifter, F1-style paddle shifters
- Pedalanschlüsse: Separate floor pedal unit (Accelerator, Brake) with foldable footrest
- Konnektivität: USB (2.1 m Kabellänge)
- Kompatibilität: PC (D-Input & X-Input), PlayStation 3, PlayStation 4, Xbox One, Xbox Series X|S, Nintendo Switch
- Produktabmessungen: 44 x 32.5 x 27.5 cm
- Gewicht: 4 kg
- Hersteller: NITHO
- Ursprungsland: Deutschland
Garantie und Support
For warranty information and technical support, please refer to the official NiTHO webBesuchen Sie unsere Website oder wenden Sie sich an Ihren Händler vor Ort. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Hersteller: NITHO
Herstelleradresse: 98 Dingwan 4th Road, Sanzao Town, Jinwan District, Zhuhai City, Guangdong Province, China
Importeur (EU): APEX CE Specialists GmbH, Grafenberger Allee 277, 40237 Düsseldorf, DE
Importeur (UK): APEX CE Specialists LIMITED, 6f East Union Street, Manchester, England. M16 9AE
Email for EU/UK Importer: info@apex-ce.com
Email for other Importer: onlineAMZTM@outlook.com
Produkt-UPC: 6971308700920
Image: Label showing warning information in multiple languages, manufacturer details, and recycling symbols.
