Rydeen CM-MINy3

RYDEEN CM-MINy3 Backup/Front View Kamera-Bedienungsanleitung

Model: CM-MINy3

1. Einleitung

The RYDEEN CM-MINy3 is a versatile camera designed for use as both a backup and front view camera in various vehicles, including cars, pickup trucks, SUVs, RVs, and vans. It features a Super CMOS IV Sensor with NightVision Technology, providing clear images in low-light conditions. Its compact design and durable, waterproof housing ensure reliable performance.

2. Produktmerkmale

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind.

RYDEEN CM-MINy3 camera and wiring harnesses

Image: The RYDEEN CM-MINy3 camera, power wire harness, compact quick disconnect, and RCA video cable.

4. Installationsanleitung

Eine Installation durch einen Fachmann wird empfohlen. Trennen Sie die Fahrzeugbatterie, bevor Sie mit den Elektroarbeiten beginnen.

4.1 Camera Installation Position Options

The camera can be positioned either on the bottom side of the trunk lid or on the face side of the rear trunk lid. It can be mounted using double-sided adhesive tape or by drilling into the deck lid with short sheet metal screws. Disassembly of the camera mounting bracket may be necessary depending on the chosen mounting location.

Diagram showing two camera installation positions: under trunk lip and on trunk face

Image: Diagram illustrating two possible mounting locations for the camera on a vehicle's trunk lid.

4.2 Elektrischer Anschluss

The CM-MINy3 features jumper wires for configuration. Ensure proper connections to the monitor, reverse lamp, and ACC/IGN output as per the desired camera configuration (backup or front view).

Electrical connection diagrams for backup and front cameras

Image: Detailed wiring diagrams for connecting the camera as a backup camera (Scenario A and B) or a front camera (Scenario C).

The camera features a small size connector for easy routing through tight spaces during installation.

RYDEEN CM-MINy3 camera with small connector detail

Image: The camera unit highlighting its compact connector, designed for easier installation.

4.3 Winkeleinstellung

After mounting the camera, adjust its angle for optimal viewing. Secure the parking brake, shift the vehicle into reverse, and adjust the camera as needed. Once the desired angle is set, tighten the bolt on the camera to secure its position.

Diagram showing camera angle adjustment

Image: Diagram illustrating how to adjust the camera's viewEinfallswinkel nach der Installation.

5. Bedienungsanleitung

Once installed and configured, the CM-MINy3 camera operates automatically based on its connection type.

Video: This video demonstrates the features and installation of the RYDEEN CM-MINy3 camera, including its compact design, waterproof rating, and the functionality of parking lines for confident reversing, both day and night. It also shows a comparison of image quality.

6. Wartung

The RYDEEN CM-MINy3 camera is designed for durability and requires minimal maintenance.

7. Fehlerbehebung

If you encounter issues with your CM-MINy3 camera, refer to the following common troubleshooting steps:

ProblemMögliche UrsacheLösung
Kein Bild auf dem Monitor
  • Lose Videokabelverbindung.
  • Die Kamera erhält keinen Strom.
  • Falsche Eingabe am Monitor ausgewählt.
  • Damaged camera or cable.
  • Check all RCA video connections.
  • Verify power and ground connections to the camera.
  • Stellen Sie sicher, dass der Monitor auf den richtigen Videoeingang eingestellt ist.
  • Inspect camera and cables for visible damage.
Das Bild ist unscharf oder verzerrt.
  • Verschmutzte Kameralinse.
  • Lose Kamerahalterung.
  • Interference from vehicle electronics.
  • Reinigen Sie das Kameraobjektiv.
  • Ensure the camera is securely mounted and adjusted.
  • Check wiring for proper shielding and routing away from power sources.
Parking lines not appearing/incorrect
  • Green loop jumper wire incorrectly configured.
  • Ensure the green loop is disconnected for parking lines ON (default). Connect it to turn parking lines OFF.
Image is mirrored/not mirrored incorrectly
  • White loop jumper wire incorrectly configured.
  • Ensure the white loop is connected for mirror image (rear view, default). Disconnect it for standard image (front view).

8. Spezifikationen

SpezifikationWert
ModellnummerCM-MINy3
SensortypSuper CMOS IV Sensor with NightVision Technology
WasserdichtigkeitIP67 - IP68
Auflösung480 TV-Zeilen
Mindestbeleuchtung<0.3 Lux
VideosystemNTSC (color)
Viewing-Winkel170 Grad
Image SelectableMirror/Standard
ParklinienWählbar Ein/Aus
Technische Daten0.78 Zoll L x 0.78 Zoll B x 0.78 Zoll H
Artikelgewicht1 Pfund
Bandtage12 Volt
Größe des optischen Sensors1/3 Zoll
SteckertypCinch

9. Garantie und Support

For warranty information or technical support regarding your RYDEEN CM-MINy3 camera, please refer to the documentation included with your purchase or visit the official Rydeen website. You may also contact Rydeen customer service directly for assistance.

Hersteller: Rydeen

WebWebsite: Rydeen Official Store on Amazon

Zugehörige Dokumente - CM-MINy3

Vorview Rydeen M7020P 7-Zoll Standalone-Rückfahrmonitor – Bedienungsanleitung
Official owner's manual for the Rydeen M7020P 7-inch stand-alone backup monitor. Includes specifications, installation guidance, functions, warranty information, and wiring diagrams.
Vorview RYDEEN 360 VIEW Quick Reference Guide - Surround View Dashcam
Concise guide for the RYDEEN 360 VIEW hinterenview mirror dashcam, covering installation, features, settings, and support. Learn about its surround view capabilities and user interface.
Vorview Rydeen CM-AHD1 Backup Camera Owner's Manual
Official owner's manual for the Rydeen CM-AHD1 high-definition AHD backup camera. Includes specifications, installation instructions, warranty information, and technical support contact details.
Vorview Rydeen BP1 Rucksackadapter – Bedienungsanleitung und Garantieinformationen
Offizielle Bedienungsanleitung und Details zur einjährigen beschränkten Garantie für den Rydeen BP1 Rucksackadapter, entwickelt für Rydeen 10-Zoll-Rucksackträgerview Spiegel. Inklusive Installationshinweisen und Kontaktinformationen zum technischen Support.
Vorview Rydeen EV486A Ersatz-Spiegelmonitorsystem mit automatischer Abblendfunktion – Bedienungsanleitung
Bedienungsanleitung für das Rydeen EV486A Ersatz-Spiegelmonitorsystem mit automatischer Abblendfunktion. Enthält Informationen zu Installation, Verkabelung, Einrichtung, Fehlerbehebung und Garantie.
Vorview Rydeen M7000P 7-Zoll Standalone-Rückfahrmonitor – Bedienungsanleitung
Offizielle Bedienungsanleitung für den Rydeen M7000P 7-Zoll-Standalone-Rückfahrmonitor. Enthält Garantieinformationen, technische Daten, Schaltplan, Montageoptionen, Hauptfunktionen, Tastenbedienung und Details zur Fernbedienung für die Fahrzeugrückfahrkamera.view Systeme.