1. Einleitung
Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.
2. Produktüberschreitungview
2.1 Hauptmerkmale
- Hohe Helligkeit: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
- Bewegungssensor-Modus: Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
- USB wiederaufladbar: Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
- Einfache Installation: Magnetic attachment allows for simple installation and removal. No tools required.
- Vielseitige Anwendung: Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
- Langlebige Konstruktion: Die lamp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.
2.2 Packungsinhalt
- Tasmor 76-LED Motion Sensor Cabinet Light
- USB-Ladekabel
- Magnetic Metal Sheets (for adhesive mounting)
- Bedienungsanleitung
Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.
3. Technische Daten
| Marke | Tasmor |
| Modell | B08LV41TPC |
| Produktabmessungen (L x B x H) | 40.5 x 4 x 0.95 cm (15.9 x 1.6 x 0.4 Zoll) |
| Gewicht | 220 Gramm (0.48 Pfund) |
| Material | Iron (housing) |
| Stil | Zeitgenössisch |
| Lichtfarbe | Warmweiß |
| Anzahl der LEDs | 76 |
| Lichtstrom | 170 Lumen |
| Farbtemperatur | 3000 |
| Farbwiedergabeindex (CRI) | 80.00 |
| Bandtage | 3.7 Volt |
| Leistung | 3 Watt |
| Besonderheit | Bewegungsmelder |
| Stromquelle | Batteriebetrieben (USB wiederaufladbar) |
4. Einrichtung und Installation
The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.
4.1 Installationsschritte
- Bereiten Sie die Oberfläche vor: Reinigen Sie die gewünschte Montagefläche gründlich, um sicherzustellen, dass sie trocken und frei von Staub und Fett ist.
- Attach Metal Sheets: Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
- Montieren Sie das Licht: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.
Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.
The magnetic attachment allows for easy removal of the light bar for charging or repositioning.
4.2 Example Anwendungen
Image 4.2.1: Lights installed inside a closet for enhanced visibility.
Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.
5. Bedienungsanleitung
The light features a switch to select between three operating modes:
- EIN-Modus: Das Licht bleibt dauerhaft an.
- Aus-Modus: Das Licht bleibt aus.
- AUTO-Modus (Bewegungssensor): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.
Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.
6. Aufladen des Geräts
The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:
- Remove the light bar from its magnetic mounting.
- Connect the included USB charging cable to the charging port on the light bar.
- Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
- An indicator light will show the charging status: typically red for charging and blue for fully charged.
Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).
7. Pflege und Wartung
- Reinigung: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
- Lagerung: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- Umfeld: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.
8. Anleitung zur Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht schaltet sich im AUTO-Modus nicht ein. |
|
|
| Das Licht geht nicht aus. |
|
|
| Das Licht ist schwach. | Die Batterie ist schwach. | Laden Sie die Lampe vollständig auf. |
| Licht lädt nicht. |
|
|
9. Garantie und Kundendienst
Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor webWebsite.
