Einführung
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
Sicherheitshinweise
WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen. Alle elektrischen Anschlüsse müssen den örtlichen und nationalen Elektrovorschriften (NEC) entsprechen. Bei Unklarheiten bezüglich korrekter elektrischer Anschlüsse wenden Sie sich bitte an einen qualifizierten Elektriker.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltagDer Bereich von 100-277 V.
Produkteigenschaften
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- Sanftes Dimmen: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- Multi-Voltage Bedienung: Operates efficiently within a 100-277V range, ensuring stable performance.
- Lange Lebensdauer: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- Geprüfte Qualität: ETL and Energy Star certified, complying with stringent safety and energy standards.
- Langlebiges Design: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
Installationsanleitung
Erforderliche Werkzeuge: Screwdriver, Wire Strippers, Drill (if anchors are needed).
Wichtig: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- Bereiten Sie das Gerät vor: Unscrew the cap nuts counter-clockwise and carefully remove the metal ring and the lens from the fixture.
- Montageplatte anbringen: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- Verkabelung anschließen: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Figure 3: Installation Steps.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
Bedienungsanleitung
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
Wartung
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche oder elektrische Bauteile beschädigen können.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Kein Strom am Gerät. Falsche Verkabelung. Fehlerhafter Schalter. | Leistungsschalter/Sicherung prüfen. Überprüfen Sie die Verdrahtungsverbindungen. Schalter testen oder ersetzen. |
| Das Licht flackert oder wird unerwartet dunkler. | Inkompatibler Dimmerschalter. Wackelkontakt. Bandtage Schwankungen. | Ensure dimmer is Triac compatible. Überprüfen und sichern Sie die gesamte Verkabelung. Verify stable power supply (100-277V). |
| Die Lichtausbeute ist zu niedrig/zu hoch. | Dimmereinstellung. Incorrect CCT selection. | Adjust dimmer to desired level. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
Technische Daten
| Attribut | Detail |
|---|---|
| Marke | ASD |
| Modellname | LED-Doppelring-Einbauleuchte |
| Artikelmodellnummer | A-LFMOV-M32D45C-N-2p |
| Farbe | Brushed Nickel (2pk) |
| Material | Durable Alloy Steel Housing, Frosted Acrylic Shade, Matte White Diffuser Cover, Solid Metal Base |
| Technische Daten | 32.44 Zoll L x 18.13 Zoll B x 4.81 Zoll H |
| Lichtquellentyp | LED |
| Wastage | 45 Watt |
| Helligkeit | 3750 Lumen |
| Lichtfarbe | 3000K/4000K/5000K (CCT Adjustable) |
| Bandtage | 100-277 Volt |
| Dimmbar | Yes (Triac Dimming) |
| Durchschnittliches Leben | 50,000 Stunden |
| Zertifizierung | ETL, Energy Star, cETL |
| Verwendung im Innen- und Außenbereich | Innen (Damp Locations Rated) |
| Artikelgewicht | 7.8 Pfund |
| Im Lieferumfang enthaltene Komponenten | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
Garantie und Support
This ASD LED Flush Mount Light Fixture is covered by a 5 Jahr Herstellergarantie. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting webWebsite.
Figure 5: Warranty and Certifications.
Produktanwendung Bspamples
Figure 6: Versatile Applications of the Light Fixture.
