1. Produktüberschreitungview
The Summer Waves P10008305 Quick Set Inflatable Pool is designed for easy setup and family enjoyment. This 8-foot wide pool features a transparent design with vivid 3D ocean life graphics on the bottom, creating an immersive underwater experience. It includes two pairs of 3D goggles for enhanced viewing of the graphics. Constructed with durable 3-ply Toughmesh materials, this pool is built for lasting use.
Zu den Hauptmerkmalen gehören:
- Quick Set Technology: Inflate the top ring, and the pool rises as it fills with water, ready in approximately 10 minutes.
- 3D Deep Sea Graphics: Engaging ocean animal graphics on the pool bottom, visible with included 3D goggles.
- Langlebige Konstruktion: Made from puncture-resistant 3-ply Toughmesh material.
- Mitgeliefertes Zubehör: Two pairs of 3D goggles and a repair patch.
2. Einrichtungsanweisungen
Follow these steps for a quick and easy pool setup:
- Standortauswahl: Choose a firm, level surface free of rocks, sharp objects, or debris. Ensure the area is large enough for the pool and surrounding activity.
- Den Pool ausklappen: Carefully unroll and spread out the pool liner in the chosen location. Ensure the drain plug is accessible and closed.
- Den oberen Ring aufblasen: Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm but not over-inflated.
- Mit Wasser füllen: Begin filling the pool with water. As the water level rises, the inflatable top ring will float, and the pool walls will expand upwards. Smooth out any wrinkles in the bottom of the pool as it fills.
- Wasserstand überwachen: Fill the pool to the recommended fill line, typically indicated on the inside of the pool wall. Do not overfill.
Image: The Summer Waves Quick Set Inflatable Pool, showing a family enjoying the pool on a sunny day. The transparent sides and 3D graphics are visible.
3. Operating the Pool and 3D Goggles
Once the pool is set up and filled, it is ready for use. Always supervise children when they are in or near the pool.
Using the 3D Goggles:
The pool features special 3D ocean life graphics on its bottom. To experience the full effect:
- Put on one of the included 3D goggles.
- Submerge your head underwater and look at the pool bottom. The graphics will appear to come to life, creating a unique underwater adventure.
Image: Two pairs of blue 3D goggles, designed for viewing the pool's underwater graphics.
Image: A close-up of the vibrant 3D deep sea ocean life graphics printed on the pool's bottom.
4. Wartung
Proper maintenance ensures the longevity and cleanliness of your pool.
Wasserpflege:
- Regularly check and maintain water chemistry (pH, chlorine levels) if using pool chemicals.
- Täglich Verunreinigungen von der Wasseroberfläche abschöpfen.
- Consider using a pool cover when not in use to keep out leaves and dirt.
Cleaning the Pool:
- Periodically drain and clean the pool liner with mild soap and water. Rinse thoroughly.
- Ensure the pool is completely dry before refilling or storing.
Repairing Punctures:
A repair patch is included for minor punctures. To use:
- Lokalisieren Sie die Punktion.
- Reinigen und trocknen Sie den Bereich um die Einstichstelle gründlich.
- Schneiden Sie den Reparaturflicken etwas größer als das Einstichloch zu.
- Apply the patch firmly over the puncture, pressing out any air bubbles.
- Allow sufficient time for the adhesive to cure before refilling the pool.
Lagerung:
- Completely drain the pool using the drain plug.
- Clean and dry all surfaces thoroughly to prevent mold and mildew.
- Deflate the top ring.
- Fold the pool neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
5. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Pool verliert Luft am oberen Ring. | Puncture in the inflatable ring or loose valve cap. | Check valve cap for tightness. Locate puncture and use the included repair patch. |
| Water level is decreasing. | Leak in the pool liner or drain plug not fully closed. | Ensure drain plug is securely closed. Inspect pool liner for punctures and apply repair patch if found. |
| Pool walls are not rising properly during filling. | Top ring not sufficiently inflated or pool not on a level surface. | Ensure the top ring is firmly inflated. Verify the pool is on a completely level surface. |
| Water appears cloudy or dirty. | Lack of proper water treatment or debris accumulation. | Skim debris regularly. Consider using appropriate pool chemicals (e.g., chlorine, clarifier) and a filter pump if desired (not included). |
6. Produktspezifikationen
- Modellnummer: P10008305
- Marke: Sommerwellen
- Abmessungen (L x B x H): 96 x 96 x 30 inches (8 feet wide, 30 inches deep)
- Form: Runden
- Material: Durable 3-ply Toughmesh
- Montagezeit: Ungefähr 10 Minuten
- Besondere Merkmale: Inflatable top ring, Drain Hole, Lightweight, 3D Ocean Life Graphics
- Mitgeliefertes Zubehör: 2 pairs of 3D Goggles, Repair Patch
- Zielgruppe: Kid (Unisex-Kids)
- UPC: 192072028201
- ASIN: B08RGLRMG4
7. Garantie und Support
Garantieinformationen:
Specific warranty details for the Summer Waves P10008305 pool are typically provided with the product at the time of purchase. Please refer to the packaging or any enclosed documentation for the most accurate and up-to-date warranty terms and conditions. Keep your proof of purchase for warranty claims.
Kundendienst:
For further assistance, questions, or to report any issues not covered in this manual, please contact Summer Waves customer support. Contact information can usually be found on the product packaging or the official Summer Waves webWebsite.
Hersteller: Polygroup
WebWebsite: www.polygroup.com (Allgemeiner Hersteller) website, specific product support may vary)
